Itunes blue screen error

I recently installed itunes from the disk that came with the ipod nano.
The problem I'm having is that when you open itunes with or without the ipod connected it crashed the computer. I rang apple and they said its a windows problem although they did suggest I download version 6 from their web site which I did and the problem still exists. I rang microsoft support and they said it was an apple problem
The problem doesn't happen all the time, around say 80% the computer shots down with a blue screen error message saying " A problem has been detected and windows
has been shut down to prevent damage to your computer.
PageFault_In_NonpagedArea
The technical information is:
STOP 0x00000050 (0xBB9EA29E,0x00000000,0x805-DA81,0x00000002) Then it
goes onto say beginning to dump physical memory, dumping physical memory to disk.
Can anyone help.
Regards

Hello,
I followed this recommendation for one of the other discussions to at least get the blue screens to stop for a while. So far so good. Try this to see if it helps. Make sure you sequence exactly or else blue screens will appear again. Good luck!
BE
Re: USB Device Not Regonized
Posted: Dec 26, 2005 8:11 AM in response to: Chaos Atheist Reply Email
I spent hours last night and today, when something simple actually worked!
If you've uninstalled/reinstalled recently, don't bother. The problem is probably the nano, NOT the computer.
Reset your nano. Move the hold switch until you see orange, then back again, lay it on the table and press the center of the wheel and menu at the same time and hold until you see the apple (6 to 10 seconds).
Then plug your cable into your computer's usb first, then connect the ipod to it. Wait. Hope it works for you

Similar Messages

  • After starting iTunes 11, I get a blue screen error

    So after I updated my iTunes to v11, it started up and it was great! Then I rebooted my PC. After logging in, I started iTunes 11. Nothing happened for a few minutes. Then the screen became black for half a minute or so and then I get the blue screen error. Now this is happening all the time when I start iTunes 11 or if I connect my iPod Touch 4g for starting.
    Please help out!!! I want to open iTunes but knowing that I'll get a blue screen error, I can't. Please help!!! I can understand if you are getting the same problem.
    Thank You!!

    Not sure, but try these.
    Disable your firewall and anitvirus software temporarily. 
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

    I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

    Not sure, but try these.
    Disable your firewall and anitvirus software temporarily. 
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • Windows Blue Screen Error

    Just updated my laptop (windows update and update to iTunes 10. Now when I connect to my laptop (via USB) I receive the Blue Screen Error. iPhone is running the 4.0.2 software. This is very familiar to an issue with the iTouch earlier this year and Apple had to send out an update. I hope I am the only one with the issue but one blue screen tends to led to several more...

    Well, I have done all of the un-install and re-install of iTunes 10 and both my PC and laptop crash when connecting my iPhone. Spent one hour on the phone with Apple Care Expert and still no resolve. Just can't sync my calendar for work etc. At least I don't have an issue with my iTouch. Just seems strange to me that the issue affects both of my computers and know else is having the issue.

  • Blue screen error when I plug my iphone into my PC

    HELP!!! I just got an iPhone, and now when I try to plug it into my PC, my PC crashes and gives me a blue screen error. I have made sure I have the latest updates of itunes, and Windows, and I am just not sure what to do . . . Can somebody please walk me through this? Everything I read talks about syncing, but that requires that the computer doesn't crash the minute I put the iPhone into the USB jack . . .
    I did sync it once fine, downloaded a few apps, which was also fine. Now I took some photos with my iphone, and wanted to put them on my computer, but it won't even let me plug it in. Please HELP!!!
    Thank you.

    My System also crahses from time to time, on connecting the iPhone. I have also checked this thread (http://discussions.apple.com/thread.jspa?threadID=1174035) but I dont have a logitech CAMERA. I do have a G15 Keyboard and a mouse but nothing else. THe Problem with the crash is: My pc neither shows a bluescreen nor is rebooting. Means: direct power off, like I would have pulled out the cable...
    very weird....plase help me, if you have any Idea.

  • Blue Screen Error when syncing ipod touch 4g 32gb with i tunes 10 on Vista

    Hi
    I'm trying to sync my ipod touch 4g with my itunes 10 using a Dell XPS with Windows Vista. After the point where the songs begin to copy (around 5 mins to 30 mins into copying) a blue screen error is caused and the computer shuts down automatically. The blue screen error ID is 2057.
    I have scanned for viruses and its clean, tested my hardrive and its all ok, and now been to apple and got a replacement ipod and usb, re-installed i tunes 10 BUT its still happening.
    i'm not sure what to do next ..any suggestions??
    BTW my computer works fine until I try syncing the ipod so it's definitely something related to it.

    Just in case anybody is interested I managed to resolve the problem. Not sure if it was a just a co-incidence but after windows had auto-removed itunes 10, I plugged in the ipod and the computer recognised it as a working piece of hardware, although it actually thought it was a camera (not sure if that's normal).
    Anyway I re-installed itunes10 but kept the ipod plugged into the usb all the time. When itunes had installed, i began the sync and the files copied far more quickly than in previous attempts. They are all on now and the ipod is working fine and no blue screen errors.
    What probably happened is that when windows auto-fixed errors after the last crash(it didn't run an auto-fix after previous crashes), it fixed the error which was crashing itunes10 when syncing. I hope nobody else has this problem and the ipod remains ok.

  • Iphone upgrade has crashed my Iphone and causes blue screen error on PC

    I just tried to upgrade my software and half way through my PC crashed. It said a blue screen error had occurred.
    Itunes now shows that my phone needs to be restored, but everytime I try to do my PC crashes again. This has now happened three times in 1 hour. I have Itunes v.8.0 on my pc but this hasnt been a problem till now. I am so angry that I have lost everything on my phone due to a problem like this. Can anyone advise how I can restore my phone without totally killing my laptop?

    With the blue screen it can be a few things that are interifering with it. First thing unplug anything from the usb ports on your computer and if you have like a logtech webcam make sure it is unplugged and also that if it is built in disable the driver. If you are on a pc you may want to go into device manager and update your usb drivers on your computer.
    use these articles
    http://support.apple.com/kb/TS2280
    http://support.apple.com/kb/TS1502

  • Camera related blue screen error, why?

    When I plug in my iPhone 3GS to my Win32 XP Pro I get a blue screen error as soon as iTunes opens.
    I have tried several fixes.  I updated my BIOS, uninstalled and reinstalled the iPhone camera driver and used different USB ports.
    So far nothing has worked.  Please help. (I already know a phone upgrade will help)

    I forgot to mention that I don't have this problem when I plug in my iPad to this computer.

  • Iphone &ipod blue screen error

    does anyone know how to fix a iphone and ipod blue screen error.
    i just installed itunes 8, the other day, and was able to sync both devices, then the other day i went to charge both my phone and ipod, and when i connect both devices to my docking station, my computer gave me the blue screen error and shut down.
    outside of doing itunes 8, i havent changed anything in my system.

    http://support.apple.com/kb/TS2280

  • HT1369 when syncing ipod, receiving blue screen error WDF_Violation

    When syncing ipod, receiving blue screen error WDF_Violation

    I am having a similar problem. I have an iPod Classic 80Gb with a brand new computer using iTunes11 on Windows 8.
    iTunes sees the iPod on the Sidebar, but when I try to sync or change any settings, roughly half the time it will crash my windows and cite a WDF Violation error. There doesn't seem to be any rhyme or reason to it. Regardless, even if it doesn't crash, it won't sync. It gets as far as "Starting Sync" and then it just stops.
    I have verified that the iPod still syncs fine on my old xp machine, and I have tried the following, all to no avail.
    Enabling Disk use
    Converting higher bit rate songs to 128 kbps AAC
    Deleting and reinstalling the iPod's drivers through device manger
    Running iTunes in XP SP3 compatibility mode
    Running iTunes as Administrator
    At one point, with disk use enabled and 128 kbps bit rate selected, I managed to get it to prompt me to Erase and Sync. it went on to erase everything on the iPod, but would not load any of my media back up. Subsequent attempts to sync gave the same result.
    I had a look at the link above, but it's a brand new computer and I installed and updated everything myself to the latest version, except my Wacom tablet, which was acting funny with the latest driver, but it can't be that because the original driver from the install CD I reverted too has workd fine in conjunction with iTunes and this same iPod for years on my other machine.
    I am getting extremly frustrated with this. Someone please help make it better !?!

  • Blue screen error message on Satellite Pro A10

    Hi,
    I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
    Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
    I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
    *** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
    This is beyond my level of expertise, can anyone help?
    Thanks

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • Satellite A300D-1EI - blue screen error - display drivers had failed

    I 've bought my laptop a month ago.
    Everything is working great except two "blue screen" errors caused by the graphics card.
    Both were when the laptop was connected with TV through S-video port.
    First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
    All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
    I am wondering if this is a driver's problem or is something wrong with my graphics card.
    System Info:
    Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
    Memory (RAM): 3.00 GB
    System Type: 32-bit Windows Vista Home Premium
    Display Adapter: ATI Mobility Radeon HD 3470

    So long you use ATI driver from ATI support page there is no possibility to say anything about it.
    This driver is not tested and Toshiba cannot offer any help about it.
    So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
    Test it please and let us know if the problem persists.
    When you want to watch movies on TV at first switch to the TV and then start DVD player.

  • Lenovo N 500 Blue Screen Error

    I just purchased this laptop in February and shortly thereafter I started to get the blue screen error message.  It only happens after the screen tries to wake up from hibernation.  I have not been able to turn hibernation off.
    The system has Windows Vista Home Basic; Version 6.0; Build 6001P1
    Any help would be greatly appreciated.  I just don't know what to do and when I tried using the lenovo care, it said that the update service would not be available until May.  This is already the middle of May.
    Thank you
    Message Edited by WLove on 05-17-2009 08:03 PM

    you can see the error properly if you disable this option   
    just uncheck the option.you can get this dialog box if you go to advanced system properties 
    Its not an easy thing for me as well,you may get solution for your BSOD in micrsoft support. thats why i was asking for more info regarding your error
    Message Edited by vijaysaradhi on 05-18-2009 11:35 AM
    Message Edited by vijaysaradhi on 05-18-2009 11:36 AM
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Getting Blue Screen error BCCode: 1a

    Sometimes mi PC with windows VISTA have espontaneus Blue Screen Error.Then after startup I would get this message,can someone tell me what I shshould do?
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 11274
    Additional information about the problem:
      BCCode: 1a
      BCP1: 00041790
      BCP2: C08020AC
      BCP3: 0000FFFF
      BCP4: 00000000
      OS Version: 6_0_6002
      Service Pack: 2_0
      Product: 768_1
    Files that help describe the problem:
      C:\Windows\Minidump\Mini093014-01.dmp
      C:\Users\jgalante\AppData\Local\Temp\WER-61171-0.sysdata.xml
      C:\Users\jgalante\AppData\Local\Temp\WER140F.tmp.version.txt
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a

    Hi,
    Bug Check 0x1A: The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.
    You can refer to the link below for more details about this error:
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff557391(v=vs.85).aspx
    When you encounter a BSOD (Blue Screen of Death) in Windows the computer will save information regarding the error message in a log file. This log file or minidump file is saved in the Minidump subdirectory under Windows (C:\Windows\MiniDump). Generally
    the information saved in this minidump file can help pinpoint the cause of the blue screen error message and help you in resolving the problem.
    Roger Lu
    TechNet Community Support

Maybe you are looking for

  • How to delete the last char in a String?

    i want to delete the last char in a String, but i don't want to convert the String to a StringBuffer or an array, who knows how to do?

  • [Oracle workflow 2.6.3] unable to find product oracle.swd.jre[1.4.0, 1.4.4]

    I want to install Oracle workflow 2.6.3 on my server, but i get the following error while installing the program. unable to find product oracle.swd.jre 1.4.0, 1.4.4 Below the step i took: I selected the oracle_home and the path where my db has been i

  • To achieve the following custom template

    Hi all, I am trying to achieve the following layout for my word report with substantial amount of accompanying images. Pardon me that my enquiry looks like a book. ;-] 1. - I need a LANDSCAPE orientation with two vertical columns. The columns are of

  • When I open Safari a web site appears saying I have a virus

    The message is as follows: System has Detected Security Error, Due to Suspicious Activity and Network Firewall seems to be Turned Off. System Might be infected with Trojan BackDoor.Flashback. Please Contact Support - Certified Live Technicians For He

  • Multiple requests in a single HttpConnection

    this is the point, I would like to make a while that sends multiple requests, but with just one HttpConnection. something like this: import java.io.DataInputStream; import java.io.DataOutputStream; import java.io.IOException; import javax.microeditio