Itunes burnign and windows xp 64bit

I was curious if anyone else here runing xp pro 64bit is having a problem with burning a cd from itunes.. Also it has problems picking up my iPOD if i disconnect it and reconnect it later on that day without moving the ipod cable to a new usb port. Its not on disk mode to help you. Thanks

Found out it was a corrupted ituens files fixed

Similar Messages

Itunes 10.5, windows 7 - 64bit, when I plug in itunes store, the screen remains blank. My AppleApplicationSupport are 2.1.5 - 2.0.1 - 1.4.1 - 1.1.0. Thanks

itunes 10.5, windows 7 - 64bit, when I plug in itunes store, the screen remains blank. My AppleApplicationSupport are 2.1.5 - 2.0.1 - 1.4.1 - 1.1.0. Help Me please. Thanks

tis works by mee
In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Audigy SE and Windows 7 64bit hiccups when i listen music and open a picture

LAudigy SE and Windows 7 64bit hiccups when i listen music and open a picture' Hi,
PC September 2009 ->> MSI P35 Neo 2FR , E8400 , Audigy SE , Windows 7 64bit RC build 700 = crystal sound , no hangs or hiccups, worked flawless in any application
PC Octomber 2009 ->> AsRock P55 Pro , Core i7 860 , the same Windows 7 64bit RC build 700 and the same sound card Creative Audigy SE with the same drivers? i have problems when i liste music on any player.
Symptom = i listen to music and when i open any random picture/program the music hiccup/hangs for a milisecond.
i tried every driver on this site and every setting on the audigy control manager , nothing worked.
i tried to update de DirectX .... i can't find any cure to my problem
i need help please[img"]http://xtrempc.ro/forum/download/file.php?id=4035&mode=view" height="83[/img] width="54">
[img"]http://xtrempc.ro/forum/download/file.php?id=4034&mode=view" height="8[/img] width="53">
[size="">Sorry 4 my bad english

i tried even PCI Latency 64 and 96 ... no change

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Install only 32bit version of AX Flash Player for IE8 and Windows 7 64bit

Hi,
For several reasons I would like to install only the 32bit version of Flash Player AX for IE 8 and Windows 7 64bit.
It was possible to do it when the installers where separated but I see no information how to do that now.
It is very convenient for me to have my 64 bit IE 8 browser without Flash that I use to browse and not get annoyed by the flash on the web and use the 32bit IE 8 on youtube, vimeo, etc when flash is necessary.
I hope the option to choose which version to install will get back if it is not possible now.
Please let me know if such kind of request should be made somewhere else as new feature or whatever.
Thank you.

That was the first thing I tried. It either works on both or disables on both versions. Something is messed with the settings as well, or has been made that way on purpose. Also the next thing I tried was to uninstall only the part residing in System 32 (leaving the one in SysWOW64) but the result was both not working after the uninstall. It remained in Programs but wasn't working anymore in both versions of IE 8. So I just put back the latest 32bit version which is not security wise..

I have iTunes 11 and Windows 7. I can't hear what is playing on iTunes.

I have iTunes 11 and Windows 7. I can't hear what is playing on iTunes, even tho I can hear other stuff (eg YouTube) on my PC. I have checked the volume settings on my PC, in iTunes and even in the mini-player - they are all set at 100%. The little diamond at the top is moving, and the equalizer is showing that the music is playing, but I get no sound (music and podcasts). Help!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

I can't download any rented movie. When I start downloading Windows iTunes crashes and Windows close this program. What should I do?

I can't download any rented movie. When I start downloading Windows iTunes crashes and Windows close this program. What should I do?

If the problem is iTunes slowing down and not appearing to run correctly, you should check this Apple article out-> Apple software on Windows: May see performance issues and blank iTunes Store
You may want to try resetting Winsock as a temporary fix.
1. To do so, please do the following in an administrator user:
Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
Windows XP: Click Start > Run and type in cmd.
2. Enter the following command:
netsh winsock reset
3. Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP.

ITunes 1.6 and Windows Vista 64bit Help

I have not been able to use iTunes properly since I got a new computer with Vista 64bit. I can play music, browse iTunes Store and watch Video, but the problem comes when I try to attach my iPod Touch or try burning a CD. With the last version, it seemed that 64bit windows Vista was not supported so I just decided to wait for an upgrade. I download iTunes 1.6 from Apple.com and try to install and it says I need the 64bit iTunes Installer. Did I miss the download for it?
This is the error message I get...
This iTunes Installer is intended for 32-bit versions of Windows. It is Highly recommended that you download and install the 64-bit iTunes Installer instead.
All I need is a Link to the 64-bit Installer because I cant find it.

What's supposed to happen is that when you go to the download page, http://www.apple.com/itunes/download, it's supposed to recognize that you're running 64 bit Vista and then you get the 64 bit iTunes installer. But I've seen reports that FireFox users are only getting the 32 bit installer page.
Can you try that link with IE? And do you get a different installer then?

Show and Share with IE8 and Windows 7 64bit

So we are running 5.2.1, and we create a live event. We have a Windows 7 64bit machine running IE8 in 32-bit mode. Everything appears to start fine, the video plays, we get audio, slides load, the different frames pop up etc etc. However, after a time the video will halt and slide updates will stop. It's almost like it just drops the connection due to inactivity. If the user shuts down the browser completely are goes back to the page it will display fine once more only to stop after so many minutes of playing once again. I've messed around with the flash settings to no avail, and have yet to find anything in IE that could account for this. Maybe I'm overlooking something, anyone have any ideas?

Well now it seems that I have another problem too. Now my iTunes can't find my iPad at all, no error messages or anything.
Now the error message was one of these 4: (0xE8000065)(0xE800000a)(0xE800006b)(0xE8000001)
I can't remember which it was because I can't get any error messages anymore.
By the way, here is a list of what I have done already to make things work.
-uninstalled/reinstalled iTunes 9.1 many, many times in different folders too.
-updated all my drivers
-checked that windows can find my iPad and it does.
-Shut down my F-Secure firewall ect. and trying to connect iPad then.
-I have done everything what you possibly can from this site http://support.apple.com/kb/TS3221
-my USB ports work fine with every other devices like my 500gb harddrive, mouse, keyboard ect. and I have tried to disconnect every other USB devices except iPad and still not working.
I'll try deleting my USB drivers now, reinstall them and even if after doing all that and iPad still not connecting to iTunes.. well then it's our of my league, I don't know anything more to do.
Oh, and by the way. I called to Apple support and they only said that there shouldn't be any problems with Windows 7 and iTunes and they couldn't help me very much.. And my iPad works fine with other computers that are in my house.

Not enough space to install itunes 11 on windows 7 64bit

I have itunes installed in my windows 7 64bit laptop.. I encountered errors when i was trying to update it with the auto updated.. so i decided to uninstall it.. Doing so i also had some problems so i decided to read some forums and eventually was able to get rid of itunes components using the microsoft fix it tool. I downloaded a new installer and everytime I run it, it gets interrupted by an error message saying check available space. I have 27GB free space on my hard drive. please help

Best solution to install Director 11/11.5 not to program files or program files(x86) in Vista/7/8 .
Create a folder c:\Director or c:\myprogs\director and install it there.
Then you will have not the security problems of system controled folders.
If you bought your Dir 11.5 in the online store, you should have a downloadlink in your orderhistory
Wolf

Itunes 10.5 - windows 7 64bit error

Hello,
I'm having a problem with Itunes 10.5. When I try to connect my iphone 3GS with itunes on my pc it says I installed the wrong version. I need the 64bit version and not the 32bit version.
But I just installed the 64bit version! I reïnstalled it 3 times, but nothing helps.
Please help me out.
Greetings,
TvV
Software = windows 7 64bit

When I connect my Iphone to my pc it says: could not synchronise with Itunes. And that I have to reïnstall Itunes and install the 64bit-version of Itunes.
That sounds like something has gone wrong with your Apple Mobile Device Support.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Unable to load itunes store in windows 7 64bit

Hi, installed 10.5... on Windows 7, 64bit machine and now cannot access Itunes Store. Appears to begin loading then stalls out. Have tried uninstalling and reinstalling. Tried running in compatibility mode. Daughters laptop (same operating system, different manufacturer) is having the same problem.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Itunes 9 for windows 7 64bit? doesn't work. anyone knows?

i tried to install both itunes 32bit and 64bit for windows 7 but it doesn't work anyone knows.... now i cant upload any music for my ipod nano 5th gen.... need your help...

i am having the same problem, it says that "this installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package."

Itunes Library and Windows 7

Hey guys,
Have a simple query that is not as such causing a problem. I was using a Windows XP machine and if I downloaded or imported a track a new folder would appear in my iTunes folder called the album name etc with tracks included, I would then have two copies of that album one in iTUnes one in the downloaded folder.
Now I am using Windows 7 (and I don't think this is the issue) but when I import a folder now into my iTunes library the XML code is updated but no new folders are added. Instead they remain in the place i downloaded them too and iTunes points to that folder. Is there a way to tell iTunes to create a folder with its own iTunes directory and then point to THAT folder rather than the downloading folder?? If this is not possible can I just copy and paste the album folder containing the songs into my iTUnes folder and then when iTunes asks me to look for the folder to find the song point it to its own folder? Christ this is getting complicated now! Sorry! Hope this will make sense to other users! Thanks in advance. The main reason I ask is because I would like all of my album folders in the iTunes folder so when I backup everything is included. Thanks guys.

Sorting in iTunes is often controlled by selecting different column headings. The sort order for any given column may be further modified by a sort value, e.g. Sort Artist affects the sort order of Artist. If you transferred the library properly all of the metadata should have remained intract and you simply need to select the a column that sorts as you want. If you had to import the library then there is the potential for tagging effects that could mean metadata entered previously didn't import with the media. Note that iTunes has no mechanism for automatically deciding which values are in <Forename> <Surname> order and could therefore be sorted as <Surname> <Forename>. The only automatic process drops leading articles (a/an/the) so that "The Doors" sort under D as "Doors".
See also Grouping tracks into albums.
tt2

Itunes burnign and windows xp 64bit

Similar Messages

Maybe you are looking for