ITunes/Burning CD using Windows

I have the most updated version of ITunes. My CD burner works fine; I even burned a movie this evening. But, when I try to burn a playlist from ITunes I get a message saying that my CD burner and software are not recognized. I've never had this problem before (it actually started before I updated version.) Please help me find the problem.

okay, folks with the 2380s on 64-bit versions of Windows (it can hit both XP and Vista) generally get relief from the 2380s by reinstalling the 64-bit versions of the GEAR drivers that iTunes uses for importing and burning.
here's a link through to the GEAR drivers:
GEAR drivers
note that there are two different versions of the 64-bit GEAR drivers. be sure to get the one that matches your hardware.

Similar Messages

  • I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf   Verify access to this dierctory". Help!

    I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf   Verify access to this dierctory". Help!

    Fixed! (win7 64 bit)! Just stop your antivirus during the upgrade/installation (I've got Kaspersky).
    Good luck!

  • How to all add all category videos to itunes?, how to all add all category videos to itunes? i use windows.

    how to all add all category videos to itunes?, how to all add all category videos to itunes? i use windows.

    What do you mean by "all category videos"?

  • ITunes 11.02 using Windows 8

    Having problems with iTunes 11.02 using Windows 8.  Can't seem to get iTunes in the secure mode.  Have checked both Norton and Windows Firewall and both show allowed.  Can't contect ti iTunes Store.  ....  Eddy

    That's too bad.  Do you have a question you would like to ask?

  • I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

    I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

    Contact NIK for updated/upgraded versions of their plug-ins.  They have been having a lot of issues with their plug-ins.

  • Premier elements 10 can't find a burner when using Windows 8.1 Would using a USB disc burner solve the problem?

    Using Premier Elements10 with Windows8.1, the program cannot detect a burner. I understand that Windows8 designates the burner as a DVD in order to facilitate drag and drop. I don't want to get too technical and want to know if purchasing an external USB disc burner will solve the problem. Will premier elements be able to detect this burner OK. I don't want to spend the money unless I am fairly certain that it will work.

    marion567
    There is no guarantee that you will not get a blank field for Premiere Elements Burner Location using any internal or external Blu-ray DVD CD burner or DVD CD burner.
    If you go with an USB external burner, just make sure you have the back up of return/money back from the seller.
    If you are dealing with just a DVD CD burner, you might try the following if you have not already
    http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
    You might also want to consider an uninstall/reinstall of Premiere Elements 10 on Windows 8.1 64 bit following the scheme of
    a. uninstall the usual Control Panel route
    b. free ccleaner run through CCleaner - Download
    c. reinstall with antivirus and firewall(s) disabled
    The following is the Adobe document that goes to Supported Devices
    http://helpx.adobe.com/premiere-elements/kb/supported-devices-premiere-elements.html
    Updating on that unknown. Right now, it is what it is. I have burners that work fine in Premiere Elements on
    Windows 7 and 8.1 64 bit and they are not on the list.
    Please let us know if any questions on the above or need clarification.
    Thank you.
    ATR

  • Burn DVD using Windows DVD Creator

    I'm using Premiere Pro CC 2014 in a Windows 7 environment.
    DVD authoring is very much an exception for me but I find I need to do so on a project I finished last night.  The Help files are full of needing Encore (which is no longer developed) to handle this but, reading the instructions, it seems I'd have to install Pr CS6 to do this. 
    So...a few questions before I spend an hour (rubbish Aussie ADSL speeds) downloading something I may not need, is it possible to use Windows DVD Maker (or, at a pinch, DVDStyler) to handle this and, if so, what export settings do I need in AME?
    FYI, I've tried using the MPEG-DVD preset with PCM Audio and I thought it had worked--but my 12 minute project stopped after just over 8 minutes and there was no audio.  I also tried compressing the audio to MPEG in AME with similar results.  DVDStyler seems to read the AME-generated .m2v file as wave so I've not even attempted a burn.
    Another question:  if I do have to go the CS6/Encore route, will my CC 2014 project file open there or do I have to do some kind of conversion?
    Any advice on the best way to do this would be very much appreciated!  I'm sure I'm missing something and this shouldn't be this difficult.

    Okay, playing around I found my own solution which I'll post in case anybody else wants to burn DVDs without installing CS6/Encore.
    I found a bit of software called DVD Flick (free under a Creative Common licence) that can author DVDs from a wide variety of source material--I happened to use a version done in AME on the Youtube HD (1080) preset and it worked well--good quality, the instructions were clear and concise, and the encoding was relatively fast (about 1 minute per minute of video).  If I need to burn any more DVDs in the future (not so likely but who knows) I may have a play with other AME settings but, for now, I'm happy and can recommend DVD Flick over keeping CS6/Encore just for the occasional DVD.

  • HT6154 Just tried to install the new update to my iPhone 5S and now it is stuck trying to communicate with iTunes and will not be recognized ny the laptop. iPhone screen shows a cable and the iTunes logo. Using Windows 7 Ultimate. How do I reset this to f

    Help!!!
    I now have a brick for a phone. Just tried to update to 7.1.1 using iTunes and it wipred out the operating system OK but now will not communicate with iTunes or the laptop. I reloaded iTunes and still no luck. If I press and hold the power and home buttons it inly comes up to the same screen showing the lightning cable pointing to iTunes logo. How can I get this running again? Even a factory reset to start would help if possible then I can do a restore. Right now it is worthless.

    Hello HarbourStables,
    Thank you for the details of the issue you are experiencing with your iPhone 5s.  I would be concerned too if my iPhone was stuck in recovery mode and not recognized in iTunes so that you can restore it.
    I recommend the following article for the issue you described and specifically this step:
    5. Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Find the full article here:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • ITunes Burning Error 4200 - Windows XP

    I recently purchased an HPa1130n running iTunes 4.9. It was working fine up until a week ago when I started getting errors that say "cancelling burn... unknown error 4200". I have read a few posts in this forum and would like for someone to help me get my system back up and burning. I've done the obvious (slowing the speed, trying different disks, etc). I've also checked my DMA settings to ensure that they are correct. From what I have read so far, I think iTunes is having trouble communicating with my CD Burner.
    Help me obi-wan-kenobi.. you're my only hope...
    Here is some of my info:
    Hardware Information
    CPU : AMD Athlon 64 Processor 3500+ 2190 MHz
    Bus Speed : 199 MHz
    Motherboard : MSI ALBACORE
    System : HP a1130n
    BIOS : Phoenix 3.12
    Memory : 1024 MB (129ns)
    Sound : Realtek AC97 Audio
    Video : ATI RADEON Xpress 200 Series
    Drive Information
    Drive : HL-DT-ST DVDRRW GWA-4166B
    Type : DVD±R/RW DL Recorder
    Firmware Version : 1823
    Buffer Size : 2 MB
    Lower Filters
    Driver : PxHelp20
    Description : Px Engine Device Driver for Windows 2000/XP
    Version : 2.03.27a
    Company : Sonic Solutions
    Upper Filters
    Driver : GEARAspiWDM
    Description : CDRom Class Filter Driver
    Version : 2.0.4.0
    Company : GEAR Software Inc.

    Thanks for the prompt response b.
    Here are some of the things you asked about:
    (1) - The diagnostic log:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    iTunes 4.9.0.17
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.1
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: VisionTek XTASY X300 SE Hypermemory
    IDE\DiskST3250823AS____________________________3.03___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
    USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
    USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
    USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
    IDE\CdRomHL-DT-STDVDRRW_GWA-4166B_______________1823___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomIDE-DVDDROM6216________________________HD07___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some Dell computers need an update to the ATA bus driver before iTunes recognizes CDs. If you have a Dell computer, check the Dell support website for details.
    E: HL-DT-ST DVDRRW GWA-4166B, Rev 1823
    Drive is empty.
    F: IDE-DVD DROM6216, Rev HD07
    Drive is empty.
    (2) New software added
    I recently installed NERO then updated to 6.6 trial. I suspect that this has something to do with it as the last time i burned a CD sucessfully was a day before I installed/updated NERO.
    (3) I tried to alternatively burn in windows media player and was also unsucessful.
    (4) I see a ton of 7 or 8 events ranging from 100, 101, 102, 103 that are related to database engines but nothing related to iTunes. I see two ACEEventLogs from today:
    0000000001: 2005-09-03 12:40:07:203 Systemtray cannot start - ACE Runtime not detected
    Error Called by: ATI.ACE.CLI.EXE.CLI::Main processID:00348 threadID:(CLISystemtray ) domainName:(CLI.exe ) assemblyName:(CLI, Version=1.2.2006.283, Culture=neutral, PublicKeyToken=90ba9c70f846762e)
    (5) It just got worse. I attempted to burn another disk and now I don't even get the error. When prompted to insert a blank disk and after clicking the burn icon, the top grey screen just blinks "checking media" a bunch of times then it times out. I don't even get to the "preparing to write" stage.
    Thanks again!
    RR

  • *Problems uninstalling itunes/quicktime after using windows install cleanup

    I was having problems installing itunes/quicktime 7.6. Everytime I tried to install it it would say that it does not have a valid digital signiture. So one of the suggestions I saw on this forum was to install windows install cleanup and use it on itunes and quicktime. So I did but all it did is mess up my old itunes/quicktime. Now when I go to try and uninstall itunes and quicktime from the add and remove programs in the control pannel it does not even show itunes or quicktime in my program list. Any suggestions??

    Ok, Update. I was able to remove itunes and quicktime manually after going into my windows task manager and to the processes tab and ended all processes involving itunes, apple, or quicktime. So now when I install itunes/quicktimes via apples site when it gets to the end it just disapears and nothing happens. I searched to see if it installed anything and it didn't, didn't even give me any reasons why. Can anyone help me with this?? It would help me a ton!

  • My IPod is not recognized by my computer nor by ITunes I am using Windows 7

    Ipod Nano bough a feww years back was initialez on a different computer. I have unsuccessfully tried to syncrhonize on a different PC with Windows 7. Ipod not recognized by either Windows or Itunes. Thanks for supplying a solution to my problem.

    Do one ore more of the following:
    > Restart You Computer
    > Uninstall & Reinstall iTunes
    > Reset your Device (won't delete anything)
    > Go to My Computer (Windows XP) OR Computer (Windows Vista & 7) and see if your computer reconizes your iPod.
    How to reset iPod
    iPod doesn't appear in iTunes
    Device not recognized in iTunes for Windows

  • ITunes wont download using windows 8.1 - your system hasn't been modified

    Hi
    I recently bought a HP pavilion g6 running Windows 8.1.  When trying to download itunes i get an error message saying can't download because your system hasn't been modified. My laptop as well as windows is fully up to date. Any suggestions?

    I have similar issue only the download is not taking place. From the apple site I hit download 3 different times, the file is not saved anywhere on my Lenovo Idea laptop. I have itunes on this laptop, the latest version it worked fine until I upgraded to win 8.1 last night. What a mistake!
    The only error message I get is iTunes not working--stop program, try to search for solution, and wait, etc.
    Any suggestions on how to get itunes working or a new download to actually work?
    Thanks.

  • Why does audio cut out 10-15 minutes into iTunes movie? Using Windows 8.1 Pro 64 bit

    My audio cuts out in any completely downloaded iTunes movie (SD or HD) 10-15 minutes into watching it in iTunes how can I fix this?
    I have to shut down iTunes completely and restart it again to get the audio to come back. 10-15 minutes later the audio disapears again.
    I am running a Windows 8.1 Professional 64-bit on a PC, 8 GB RAM, ADM Athlon II X2 265 Processor, 3.30 GHz
    Running iTunes application version 11.1.3.8
    Quicktime 7.7.4 (1680.86)
    I tried uninstalling and reinstalling iTunes already.
    Any ideas?

    Hi  RonaldRenaud,
    If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
    Please check if you have installed the update kb2984006.
    To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
    http://support2.microsoft.com/kb/2989039/en-us
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • HT1414 I download the new version of iTunes for my iphone 3gs, but when send to me to restoring software a massage say not found a dispositve.On my iPhone the only thing that I can see is USB plug showing me iTune icon.I using windows XP.Can anybody help

    My iPhone 3GS cant restore iTune software, I tried to update the last version and did ok , but when  I try to restore the program a message said, no dispositive found.I see on the screen a usb and the iTunes icon indicator.

    http://www.apple.com/feedback/kaywerty wrote:
    A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
    It's not possible.
    Suggestions here -> Apple Product feedback

  • Disc Burner Not Found Windows Vista

    Im getting disc burner not found or burning software not found with iTunes 7.2 using Windows Vista x64
    It worked fine in Windows XP!
    I use a Sony DRU-810A with latest 1.0f firmware.
    Please fix this Apple this is annoying, it worked in XP!

    Im getting disc burner not found or burning software not found with iTunes 7.2 using Windows Vista x64
    the x64 thing may be the key to this.
    check your DVD/CD diagnostics. (in iTunes, go "help > run diagnostics" and select DVD/CD diagnostics.) do you see error 2380 showing up next to the CD or DVD drives in the diagnostics?
    if so, try reinstalling the 64-bit version of the GEAR drivers that iTunes uses for importing and burning. the GEAR drivers are available from the following page. (note that there are two different versions of the 64-bit drivers, so be sure to get the version that matches your hardware):
    GEAR drivers

Maybe you are looking for