Itunes can not find My Music folder

I recently had a friend who backed-up my music folder to a external hard drive. After a while it was to complicated to use, so I moved all my music back to my laptop. Now when I start iTunes, it states
"The folder "i Tunes" cannot be found or created, and is required. The default location for this folder is the "My Music" folder
I followed instructions from the Apple website to download Tweak UI, but even that doesn't list "My Music" folder. It list all the others, "My Pictures etc."
When I click on my documents, "My Music" is there with the "Itunes" folder, but I am still unable to get Itunes to work. Please help.
Dell Windows XP Nano

hiya!
in the cases where "My Music" doesn't appear as an option in TweakUI, we've been having some success using the alternate procedure in this Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem
love, b

Similar Messages

ITunes can not find my music on external hard drive

Had to redo my hard drive; had all music on external hard drive; copied iTunes folder onto external hard drive. Now that my desktop hard drive is clean, and new iTunes downloaded, it can not find my music on the external drive which I have always used. Is there some setting I am missing, do I have to copy music onto CPU?

Hold the SHIFT key while launching iTunes. You will get the option to navigate to the iTunes folder on your external drive. In the iTunes folder point it to the iTunes Library.itl file.

Itunes can't find my music folder

I can't install Itunes....it downloads fine from the exe file but when i try to open itunes it gives me the error msg that it can't find My Music folder. I went to the support page and it told me that if i couldn't find My Music folder to create one in My documents and download/install Tweak UI. I did and followed all the steps except when it asks me to click on My computer, then special folder and can't find the My Music folder to move it. I am using Windows XP....Please help. Has anyone ever had this problems?

I finally found a solution here: http://forums.techarena.in/windows-xp-support/983948.htm
it's stupid, you have to hold down the shift key while you open iTunes (don't just hold it while you click, keep holding it until iTunes actually shows the library dialog).

HT203288 Itunes can not find my music files. But I can with Windows . Lost over 8 hours trying to fix stupid itunes, Even removed it and reinstalled. Still nothing.

But I can using Windows.
Lost over 8 hours today. Still not working
Even deleted itunes and reinstalled.
My Music files are still there. But itunes can not find them.

Empty library or library full of broken links?
tt2

ITunes can't find My Music folder & won't launch - Vista OS

Hello,
I've been using iTunes successfully for months with Vista, then one day iTunes wouldn't launch. I got the error message "The folder itunes cannot be found or created and is required. The default location for this folder is inside the my music folder."
I've seen a similar post but for Windows XP - referencing a system registry problem.
This doesn't seem relevant because Vista doesn't even have a My Music folder. The folder is named "Music" and is not located in My Documents.
Can anybody help? Thanks!
I upgraded to Windows Vista on my Sony VAIO desktop. There w

Then I already gave you your answer in a previous post.
By the way:
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605

TS1314 i can not find a photo folder on the left side on itunes

I can not find the photo folder on itunes

It doesn't appear on the left-hand side. If you want to sync photos to your device then you need to connect it to your computer, select the iPad/iPhone/iPod Touch on the left-hand side under 'Devices', and one of the tabs on the right-hand side should be Photos i.e. it's similar to the other tabs that you use for selecting what to sync to the device : syncing photos. You will need to sync all the photos that you want on the device together in one go as only the most recent photo sync remains on the it- not including photos in a subsequent sync is how you delete them from the it.

Itunes can not find my iphone6(V8.1.2)

1. after actived my iphone6 2days, it work off and display No Service.
2. connect to windows7 PC, itunes can not find the iphone6 device. iphone6 versiion is 8.1.2, itunes' is 12
please share solution with me ,thanks

Hi XuanLe,
Welcome to the Support Communities! The resources below will help you troubleshoot the issue you are having of No Service (cellular data) and syncing with iTunes 7 on your PC.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
http://support.apple.com/en-us/TS4429
If you're in your carrier's coverage area
Follow these steps, testing after each.
Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Restart your device.
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Contact your carrier to check for any network or account issues.
Restore your iPhone.
If you see No Service while roaming or traveling
You might be outside of your carrier's coverage area. If you're traveling internationally, you'll need an international roaming plan to use your iPhone or iPad.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-us/TS1538
Click on the link above to see the complete article. I've hightighted the information pertinent to Windows 7 for you.
Restart
Turn off your computer and your iOS device, then turn them on again.
Update your computer
Check to make sure that you've installed all required updates for your computer.
Update iTunes
Check that you have the latest version of iTunes installed on your computer.
Make sure your iOS device trusts your computer
If you connect your iOS device to your computer and see "If you have not connected your iOS device to this computer before, unlock the device and tap Trust," make sure that your device trusts the computer.
Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7
Click Start.
Choose Control Panel.
Click "Uninstall a program" (or, if you're using Windows Vista's Classic View of the Control Panel, click "Programs and Features").
Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, learn how to resolve issues installing iTunes for Windows.
Restart the Apple Mobile Device Service
Learn how to restart the Apple Mobile Device Service (AMDS) on Windows.
Verify that the Apple Mobile Device USB Driver is installed
Windows Vista, Windows 7, and Windows 8
Connect the device to the computer.
Quit iTunes if it launches.
For Windows Vista and Windows 7:
Click the Start menu, right-click on Computer, and choose Properties.
In the upper-left corner, click Device Manager. The Device Manager window should open.
Click the plus (+) icon (or disclosure triangle () (for Windows 7 and Windows 8) next to "Universal Serial Bus controllers" to expand this selection.
Locate the Apple Mobile Device USB Driver in this list. If this entry is displayed without any downward arrow, "!" or "?" symbols over it, then this driver is successfully installed. Continue to "Check for third-party software conflicts".
If the Apple Mobile Device USB Driver is not listed, continue to "If the Apple Mobile Device USB Driver is not listed".
A downward arrow appearing next to the device's entry in Device Manager indicates that this device is disabled. To enable this device, right-click its entry in Device Manager and choose Enable from the shortcut menu.
If the Apple Mobile Device USB Driver entry is listed, but has an exclamation mark or question mark over it, reinstall the Apple Mobile Device driver:
Right-click the Apple Mobile Device entry in Device Manager.
Choose Uninstall from the shortcut menu.
When prompted, select the box "Delete the driver software for this device," and click OK.
In the resulting dialog box, click OK.
In the Device Manager window, right-click "Universal Serial Bus controllers" and choose "Scan for hardware changes" from the shortcut menu.
Windows automatically reinstalls the necessary drivers and attempts to remount the device.
If the Apple Mobile Device USB Driver entry still has an exclamation mark or question mark over it, right-click this entry and choose Properties. Under the General tab, look beneath "Device status."
If you see a message that reads: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)," see the section below for Error Code 52.
If you see a different error code, manually update the Apple Mobile Device driver:
Right-click the Apple Mobile Device entry in Device Manager.
Choose Update Driver Software.
Select "Browse my computer for driver software."
Select "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. If the Have Disk option is not available, choose a device category such as Mobile Phone or Storage Device (if listed). Then click next. The Have Disk button should appear.
Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers instead).
Click Open in the Have Disk window. Click Next. Then click Finish. Windows will install the driver.
During installation, if a message appears stating that the software you are installing "has not passed Windows Logo testing," click Continue Anyway to continue installing the drivers.
You can find solutions to other common errors and error code numbers in this Microsoft article.
Error Code 52
You might see this message in the Properties window for your device: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)."
To resolve Error Code 52:
Install all available updates for Windows. See this Microsoft article for more information on how to do this.
Consult your computer manufacturer for updates for your computer's drivers, including disk drives, chipsets, and USB controllers.
Temporarily disable "forced driver signing enforcement" as follows:
Restart your computer.
While restarting, press the F8 key.
Windows Vista and Windows 7:
The Windows Advanced Options list should appear. Press the Arrow Down key until "Disable forced driver signing enforcement" is highlighted.
Press the Return key.
Press the Return key.
Click "Change defaults or choose other options".
Click "Choose other options".
Click "Troubleshoot".
Click "Advanced options".
Click "Startup Settings".
Click "Restart" when prompted.
When prompted, press the 7 key to "Disable driver signature enforcement".
Reconnect the device.
If the device is recognized successfully, then you'll need to perform these steps each time you start your computer. Consult Microsoft, or whoever supports the installation of Windows on your computer, for more troubleshooting to resolve the issue without having to select this option each time.
If the Apple Mobile Device USB Driver is not listed
Disconnect the device from the computer.
Save a screenshot by pressing the Home button and the Wake/Sleep button at the same time (the screen should flash briefly). Taking screenshots and saving images on iPod touch requires iOS version 2.0 or later.
Reconnect the device to the computer.
Open the Device Manager in Windows:
Windows Vista or Windows 7:
Click Start.
In the dialog, type devmgmt.msc.
Press Return.
If Windows needs your permission to continue, click "Continue".
Expand all the sections labeled below (not all sections might be listed):
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone, Apple iPad, or Apple iPod.
If only "Unknown Device" appears:
Right-click on the "Unknown Device" entry.
Choose "Properties" from the shortcut menu.
Click the Details tab.
In the drop-down menu, select "Hardware IDs."
If the hardware ID displayed starts with:
USB\VID_0000&PID_0000
This means that Windows cannot read the hardware IDs of the device, and so has replaced them with all zeros. This is typically caused by a faulty USB connection, or an incompatibility with your USB chipset drivers.
Disconnect the device, and unplug all USB devices from your computer.
Shut your computer down, then power it back on.
Reconnect your device, testing each USB port for approximately 30 seconds to see if your device is recognized.
Test with an alternate, known-good 30-pin to USB cable or Lightning Connector to USB cable if available.
If you have an external USB 2.0 hub available, connect the hub to your PC, and then connect the iOS device to the hub.
If your device shows up in iTunes, try disconnecting the external USB 2.0 hub and connecting the iOS device directly to your PC. If the issue returns, you may need to use the external USB 2.0 hub as a temporary workaround. Then, consult your computer manufacturer for any updates for your USB chipset.
If "Unknown Device" appears when connecting your device to more than 1 known-good computer, with more than 1 known-good USB cable, your device might need service. Learn more about your service options.
If the device is not recognized while in Recovery Mode
Your device might not be recognized while in recovery mode. This can happen during an update or restore of your device. Typically, when your device is in recovery mode, it will show the "Connect to iTunes" logo on its display. If iTunes does not recognize the device when in this state:
Windows Vista or Windows 7:
Click Start.
In the dialog, type devmgmt.msc.
Press Return.
If Windows needs your permission to continue, click "Continue".
Click the disclosure triangle () (for Windows 7 and 8) next to Imaging Devices, Other Devices, Portable Devices, and Universal Serial Bus Controllers to expand these sections.
Check these sections for one or more entries called Apple Mobile Device (Recovery Mode). These entries might or might not have exclamation marks on them.
If you see only one "Apple Mobile Device USB Driver" entry that has no errors on it:
Find out if the computer has USB 3.0 ports. Within Universal Serial Bus Controllers, locate any entries containing "USB 3.0" or "SuperSpeed USB" in the title. If these are listed, you have USB 3.0.If you have USB 3.0:
Try to connect the device to a different USB port. Try each port until the device is recognized. Some computers will have dedicated USB 2.0 and 3.0 ports. If so, a USB 2.0 port might resolve the issue.
Refer to your computer manufacturer for updates to the USB 3.0 chipset drivers.
If the issue persists, continue to "Check for third-party software conflicts."
If you do not have USB 3.0
Continue to "Check for third-party software conflicts."
If you see two "Apple Mobile Device (Recovery Mode)" entries with exclamation marks on them:
Open the Device Manager and connect your device.
Click the View menu.
Select "Devices by connection."
Locate the erroneous "Apple Mobile Device (Recovery Mode)" entries. You might need to expand all sections of the Device Manager to see them.
Directly above these entries will be a USB Composite Device entry.
Depending on your version of Windows, take the following steps to update this driver:
Windows Vista, Windows 7, or Windows 8:
Right-click the parent USB Composite Device entry.
Choose Update Driver Software from the shortcut menu.
Click "Browse my computer for driver software".
Click "Let me pick from a list of device drivers on my computer".
Click the Have Disk button.
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps.
Open iTunes to verify that the device is recognized properly, and continue restoring your device.
Check for third-party software conflicts
Certain phone and cellular device connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, Sony, Android, LG, Sierra, Huawei, Pantech, or Motorola might cause your device not to be recognized. If you have such software on your computer:
Uninstall the phone or cellular connectivity software temporarily, and test. Contact the manufacturer of this software for assistance in doing this. If you use the third-party phone or cellular device for your Internet connection, try connecting to an alternate network using Wi-Fi or Ethernet.
Remove iTunes and all related Apple software.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8
After reinstalling iTunes, test the device.
If you still need your third-party phone or cellular connectivity software that was removed, reinstall this software and test your device to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
Also, third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software. After resolving any issues that you might have with your security software, you might need to try the steps in this article again.
I hope this information helps ....
- Judy

Itunes can not find original song file

Suddenly my itunes can not find the song's original file.
I see that the file is on the driver but when I double click on Itunes I get this mesage:
"the song could not be used because the original file could not be found.
Any helpers out there?
THKS

I've been experiencing this problem for a while now. It happens with version 7.1 but it started with an earlier version of iTunes 7. I never experienced it before iTunes 7. In my experience the number of files iTunes "thinks" is missing increases with the length of time iTunes has been running between restarts (I usually just put my system to sleep overnight so it can "run" for days on end). When it first started happening I used to go and find the "missing" music file(s) and reconnect it(them). Then, one day, I found a flood of "missing" songs. I decided I had nothing to lose by stopping iTunes and restarting it. When I restarted iTunes none of my songs were missing! This indicated to me that it's the iTunes code that's active after a restart that has a bug that makes it lose track of the music files.
To check, I looked in the Music/iTunes/iTunes Music Library.xml file for songs while they were being reported as "missing", and, lo and behold, the song file locations are still there. iTunes must reread the xml file when it starts up and this cures the problem, at least in my case. (Too bad it doesn't use the file while it's running.)
I usually just play my entire library in random order. So, if a song or two disappears, I'm rarely aware of it. All I've been doing lately is stopping and starting iTunes when I feel like getting rid of the "!" scourge.

How do you get album artwork? I have like two thousand songs and about 95% don't have cover album artwork and when i try to get album artwork it says "Itunes can not find album artwork" "an unknown error occurred-609" what do i do?

How do you get album artwork? I have like two thousand songs and about 95% don't have cover album artwork and when i try to get album artwork it says "Itunes can not find album artwork" "an unknown error occurred-609" what do i do?

Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

I can not find mozilla firefox folder in Start All Programs how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

i can not find mozilla firefox folder in Start>All Programs> how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

A quick workaround - Go to Start > Run, and paste this in the box: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode

I can't find my music folder in my ipod. please help

I synced all my folder music to Ipod classic, then I look to my Ipod classic but I can't find my music folder anywhere. Please help...

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

My iPhoto has crashed and will not load up my picture and iTunes can not find my photos. Why?

My iPhoto has creashed and will not load up my pictures and iTunes can not find my picture either. Why?

Tell us more please - so it is hard to guess what might have happened.
What is your iPhoto version and your MacOS X version?
What happened directly, before you could no longer open your iPhoto library?
Did you install or upgrade software?
Did you import new photos to your iPhoto library?
Are other programs also behaving buggie?
Did you move your iPhoto library to a new harddisk?
Did you run other programs, that might have changes the iPhoto library?
How full is your harddrisk? Could it be, that you are running out of disk space?
Anything at all, that could give us a clue ...
-- Léonie

I have a problem. I updatet to 5.0 and then Itunes can not find the phone and on the screen on the phone there are only a picture of an usb cabel and a logo for Itunes.

After updating Itunes can not find the phone and on the phone screen there are only a picture of an USBcabel and a Itunes logo. What can I do???

Try this previous correctly answered discussion
https://discussions.apple.com/message/11029862#11029862

After iPhone connects to iTunes, can not find the photos tab for sync

After iPhone connects to iTunes, can not find the photos tab for sync. Thus, I can not copy some phototes from my Macbook to iPhone, But my iTouch can do this. I don't know why.

If you are using a mac, you use iphoto.
If you are on windows, you use whatever camera software windows uses.
Itunes does not import photos.

Bought new HD and now iTunes can't find my music

I just bought a new FW HD, WD My Passport. I copied all of my music from my old USB 2.0 HD to the new one and now iTunes can't find all the songs. It'll play probably 40 or 50 songs but the rest of them show the "!" next to the song name. Right now the only thing I can do to show iTunes where the songs are without having to rebuild my playlists is to manually point it to each individual song but since but that would mean pointing it to over 14,000 songs......... I DID go in to the preferences and changed the folder location to the new HD and it still won't find the files. But strangely enough, when I have the old HD plugged in, as well as the new one, it'll play everything just fine, checking the preferences shows that iTunes is pointed to the new folder but "Get Info" on individual tracks shows iTunes finding the file in the old HD, unplug old HD and files cannot be found. Why doesn't the **** program look where I want it to and what do I have to do to fix it? I know my description here isn't crystal clear so I'll gladly answer any question to help clear it up a little. ANY help is very much appreciated as I do not want to spend the next 3 weeks teaching iTunes one song at a time. Thank you.
Chris

For moving your iTunes library, I recommend this method...
Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
If you are just testing, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location.
Back up your iTunes library by copying to an external hard drive
http://docs.info.apple.com/article.html?artnum=307074
Patrick

Itunes can not find My Music folder

Similar Messages

Maybe you are looking for