Itunes can't burn this cd because the burn speed is too fast for your cd...

For the first time since upgrading to 10.3.9 I'm trying to burn a data disc from iTunes to backup some files. It fails every time and ruins the blank CD. This is getting expensive!
The CDs are Phillips CD-R 52x. (Yes, I've used blanks from this very box before the 10.3.9 upgrade and it never failed before.) iTunes was set to 24x burn then changed to "maximum possible" for the burn speed.
Most times it looks like it's burning the playlist but around the 5th file it spits it out and gives the error "itunes can't burn this cd because the burn speed is too fast for your cd burner or media". Sometims it just locks up itunes with "checking media" and I have to force quit iTunes. Then the disc is ruined. It won't even show up in Finder.
Ugh. Anyone know how to fix this?
edited p.s.
Here's what the Console log says for the last failed attempt.
Mac OS X Version 10.3.9 (Build 7W98)
2007-05-13 14:20:36 -0500
iTunes: Burn started, Sun May 13 14:21:47 2007
iTunes: Burning to CD-R media with SAO strategy in MATSHITA DVD-R UJ-816 DXJ3 via ATAPI.
iTunes: Requested CD burn speed was max, actual burn speed is 16x.
iTunes: Burn underrun protection is supported, and enabled.
iTunes: Write (10), block: 72864, count: 32 -> 3/0C/00 Medium Error, Write error
iTunes: Burn failed, Sun May 13 14:24:37 2007
iTunes: Burn sense: 3/0C/00 Medium Error, Write error
iTunes: Burn error: 0x80020060 The device drained its buffer without burn underrun protection.

I just tried setting the iTunes preferences to burn at 4x (since in theory the specs say my SuperDriver burns CDs at 8x) and got the following error.
The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry..
and looking in the console this is the error.
iTunes: Burn started, Sat May 19 21:46:14 2007
iTunes: Burning to CD-R media with SAO strategy in MATSHITA DVD-R UJ-816 DXJ3 via ATAPI.
iTunes: Requested CD burn speed was 4x, actual burn speed is 4x.
iTunes: Burn underrun protection is supported, and enabled.
iTunes: Write (10), block: -150, count: 32 -> 3/73/03 Medium Error, Power calibration area error
iTunes: Burn failed, Sat May 19 21:46:25 2007
iTunes: Burn sense: 3/73/03 Medium Error, Power calibration area error
iTunes: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
iTunes: Burn started, Sat May 19 21:52:27 2007
iTunes: Burning to CD-R media with SAO strategy in MATSHITA DVD-R UJ-816 DXJ3 via ATAPI.
iTunes: Requested CD burn speed was 4x, actual burn speed is 4x.
iTunes: Burn underrun protection is supported, and enabled.
iTunes: Write (10), block: -150, count: 32 -> 3/73/03 Medium Error, Power calibration area error
iTunes: Burn failed, Sat May 19 21:52:35 2007
iTunes: Burn sense: 3/73/03 Medium Error, Power calibration area error
iTunes: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.

Similar Messages

"Can not perform this operation because the layout is too complex"

"Can not perform this operation because the layout is too complex"
to create a 3D extrusion
Hello
Is it possible to work around and solve this problem?
Without going through the box: cutting 4 part
please
xavier.

Merci Violon popur tes conseilles, cool !
After clipping of an object on a photo
I want to make a 3D extrusion.
With a picture of this size that does not work :
1979/2765 300PP 31,3Mo
I have this error message appears: “ Can not perform this operation because the layout is too complex ”
For successful operation
I must necessarily reduce the size of the photo to
597/834 300PP 2,85Mo !!!
How not to lose the pixel ?
I need it additional plugins ?
Version Adobe Photoshop : 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
Système d'exploitation : Mac OS 10.9.1
Architecture système : UC Intel Famille :6, modèle :44, niveau :2 avec MMX, SSE Entier, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Nombre de processeurs physiques : 12
Nombre de processeurs logiques : 24
Vitesse du processeur : 2930 MHz
Mémoire intégrée : 32768 Mo
Mémoire libre : 27285 Mo
Mémoire disponible pour Photoshop : 31299 Mo
Mémoire utilisée par Photoshop : 90 %
Taille de la mosaïque d'images : 1024K
Niveaux de mémoire cache de l'image : 4
2 X 2,93 GHz 6-Core Intel Xeon
NVIDIA Quadro 4000 2048 Mo
4 X 8 (32 Go) DDR3 @ 1066Mhz
2 X OWC Mercury Extreme Pro 6G SSD Media (System acquisition / Projects)
2 x 2 To de DD (5400tr/min)

After updating to 4.3 I can't connect to wi-fi because the "internet speeds are too slow". How much speed does this require?

After updating to 4.3 I can't connect to wi-fi because the "Internet speeds are too slow". So what speed does it need?

I called tech support and I got the same **** canned response, backup and reset to factory settings. Yeah right! Everything was fine until Verizon shoved the software update down my throat. I finally unchecked the box in Wi-Fi settings for auto network switch. However, I still get the "Your Internet connection is unstable" warning no matter what Wi-Fi connection I hit.
In a related story, I received a new or refurbished phone as my original SIII had AC/charging connection issues. I called probably three times to attempt to back up my data, went into two stores in attempts to have them transfer the information over, and all were too incompetent and inept to assist me. Only when talking to someone about this Wi-Fi issue, did someone actually know how to back up everything. Of course by this time, I had to send the new phone back because Verizon charged me $400 before I got everything squared away. What a colossal waste of my time!

I own CS 5Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems

I own CS 5 Design Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems reasonable but $49 is way too much. I don't need the majority of the programs included in CC, but subscribing to just three of them will cost way more. Really not sure what to do here :-(

Thanks Ned. I did find this page, however it isn't an upgrade. I have been purchasing Adobe products for years so that I could just pay the upgrade price for current products. With the current system, I would be paying much more than I would for an upgrade. For example, I have been using my version of CS for at least three years. The upgrade cost me $750 so that comes out to around $21 per month. I guess I have no options as far as upgrading except for paying for the overpriced CC. Oh well, time to start looking for alternatives. It was just so convenient to have the same programs at home that I use at work.

HT1766 i have iphone 3 how can i update this phone because there is no option i setting for update

i have iphone 3 how can i update this phone because there is no option i setting for update

You have to update using iTunes.
<http://support.apple.com/kb/ht4623>
The latest iOS for the iPhone 3 is iOS 4.2.1

TS3212 iTunes can't connect with iPhone because the pairing record is missing

I have been having a lot of trouble with iTunes on Windows XP. I have had to completely uninstall iTunes, QuickTime, iPod, Apple Mobile Support, Apple Application Support, etc. and reinstall iTunes several times just to get to this point: now when I connect my iPhone using USB, I get the error message:
'iTunes could not connect to the iPhone "John L. Mohammed" because the pairing record is missing.'
What is this about? What can I do about it?
It should be noted that the latest attempt to install iTunes does not seem to have installed QuickTime, though it does not complain about missing software.

Try disconnecting your phone from your computer, quit iTunes, connect you phone to your computer again, the re-launch iTunes.

Whenever i try to backup my Iphone 4 i get an error message " Itunes can not backup (my Iphone) because the backup was corrupted or not compatible with the Iphone"

whenever i try to back up my iphone it gives me an error message "itunes could not back up (my)iphone because backup was corrupted or not compatible with your iphone" i already deleted the itunes backups through the prefrences tab. this has not helped. what am i doing wrong?

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

HT201210 iTunes can't sync my iPod because the connection was lost.

I have been having some issues with backup and sync for the past week or two with my iPod Touch. I am being told by iTunes that it cannot sync with my iPod because the connection was lost. I tried a different cable and still no luck.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

HT1414 My iPod has the IOS 5.1.1 OS and I can't download some apps because the operating system is too old. How can I upgrade my iPod without having to buy a new one?

I have an iPod Touch that has the IOS 5.1.1 and I want to update my OS without having to buy a new device. How can I do this? I have logged into ITunes, backed up my device and it says my device is up to date, but now I can't reload my Facebook App because it says I need IOS 6.0 or higher. Does anyone have any suggestions?

To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
App Store: Downloading Older Versions of Apps on iOS - Apple Club

I have restored my ipod many times, yet I still can't back it up because the "session has failed" and error 54. Does anybody know how to fix this?

[Windows user] I have an ipod touch 5th generation 64gb and I can't backup my ipod. I have restored it many times, even in recovery mode, but it still comes up with "iTunes can't backup this ipod because the session has failed," yet it was still plugged in. Also error 54 pops up too. Does anybody know how to fix this?

If a PC try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Safari could not open this page because the server stopped responding

Since upgrading to 4.2 I get this message a lot even though the page loads anyway:
"safari could not open this page because the server stopped responding"

Have you Checked your firewall setting(of both windows and of the Anti Virus).
I was Having the same Problem, and tried everything from the Internet, then i realised that firewall can mess things up and so i immediately TURNED OFF the firewall and restarted my Network and my Ipod ....THE INTERNET WORKED
i am using win vista and McAfee.
want to add few more things:
1> adjusting brightness has nothing to do with Networking.
2> Multiplayer/online games also get into problem due to antivirus firewall(AVG anitvirus specially.....Disabling firewall or setting it to permit the Device/program to access Internet WORKS)
3>to know if the problem is with the Idevice or with the System, try connecting other devices to that netwrk, if non of them connect then its the problem with the System/Network/OS and not with the Device........Resetting you Idevice again and again will not Solve the problem.
Happy Idevicing

2nd time this has happened. Computer making noises too loud for computer.

Okay, seriously I have had enough. While using Garage Band editing music, my computer once again made a too-loud beep/honk noise. This has happened once before. Now my audio/built in speakers are F'ed! NOW ALL MY AUDIO SOUNDS LIKE THIS: http://www.youtube.com/watch?v=OcTHGDOLEoc (you gotta play the video. )
This has happened once before, but everything was okay except for a bit of distortion. WHY does this keep happening?! Heres a bit more information:
- Using Garage Band, didnt press ANY buttons to trigger sounds
- In using wireless internet, password protected
- I only had iMovie and iTunes opened (as well as GB)
- THIS IS THE SECOND TIME THIS ** HAS HAPPENED
- The sound was WAY too loud for the computer. It was like Max times 50
- I've only owned my Mac for about a year.
- I do not want to get a new bloody Mac, I just downgraded from SL.
I'm not really happy atm, so dont give me stupid answers.
(Wow, it sounds like im listening to AM radio! WOW! ... -.- )

I don't think you got a KP when the machine was off, but rather you may have closed the lid before the MB was fully powered down and it went into a sleep state.
Did you try running the Apple Hardware Test to see if the ram is bad? Since yo never had a KP before adding new ram, and the only change was adding said ram. My guess is that its the memory that is the cause.
I cannot vouch for patriot ram, but I suggest in the future you consider Crucial as its a higher quality ram.
Mike

My ipod whont sync this message keeps coming up itunes cannot sync apps to ipod because the apps installed on ipod could not be determined, what can i do?

my ipod whont sync this message keeps coming up itunes cannot sync apps to ipod because the apps installed on ipod could not be determined, what can i do?

I think we may have an answer here as these 2 threads seem related to our problems. Unfortunately it's not an answer that's welcome.
Can't download free or purchased apps...: Apple Support Communities
App download buttons not working.: Apple Support Communities
Looks like Apple may have finally abandoned the 2g ;-(
-DJC

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

I had my computer repaired, and when I got it back I had to reinstall iTunes. Now iTunes won't authorize this computer because it says we already have 5 devices authorized, but this is the same computer. Does anyone know how I can fix this?

Deauthorizing won't delete anything, and all your purchased content is safe. You will just have to reauthorize any of the other computers that get deauthorized along with your computers old machine id.
To get your purchased content back on that computer, just use iTunes to redownload it (http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US). Of course, music you ripped from CD or got from another source you'll need to copy those files back over.

HT2534 but i have problem in step 13. i can't see step(13) because the red box that has this message "please contact itunes support to complete this transaction" apears. plz help me how can i pass this step

but i have problem in step 13. i can't see step 13 because the red box which has this message " please contact itunes support to complete this transaction" apears. plz help me how can i pass this step

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.

Itunes can't burn this cd because the burn speed is too fast for your cd...

Similar Messages

Maybe you are looking for