Itunes: can't connect to itunes server
I have read numerous posts about this topic, and have tried various solutions which have worked for other people but none of the solutions have worked for me. I have a macbook pro, and have updated my software, updated itunes to the latest version, and have a good internet connection. I have checked my date and time. It was initially set to automatic, and the time and date were correct with that setting. As per other suggestions in other posts, I switched off the automatic date&time to see if it changed anything....no success. This has been going on for months. Anytime I want to download something from itunes I have to do it on another device (iphone, ipad) Please help!
Hey kelnol!
The complete list of troubleshooting steps recommended by Apple for resolving this issue can be found below:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Similar Messages
-
i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
ThanksHere are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall. -
after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help
Was thje TM backup 10.6 also?
I never use TM for Backups, far better less painful backup methods, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine something not being covered there. -
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
My ipod touch connects to wifi but can't connect to the server.
Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
Thanks for your timeHave you tried restoring your iPod touch in iTunes?
You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
-Messymeese
Über Enbonpoint Pangolins FTW! -
I am not able to use iMessage, While I am trying to connect, it says 'Can not connect to the server'.
I tried to reset apple id for iMessage but now it is not accepting any apple id with gmail or icloud id.
Kindly helpTry here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us -
my apple TV second generation can not connect to the Itunes store. I keep getting a message saying. Apple TV can't Connect to the server at this time. Please try later. Is it on my end or is there an issue on Apples side? I can see previews and such but can not buy or rent anything
I have four Apple TV's in my home, and I get this message all the time. What is intersting, is when it occurs on one,it occurs on ALL four simultaneously. We also have two iMacs, two iPads, and three iPhones, all use the same apple I'd and password, those other devices connect to iTunes just fine when this occurs with the TV's. I too can also watch previews, use Netflix, etc.
It is clearly a gremlin specific to iTunes and Apple TV's, and your account. Re booting the TV does work.
I am forever rebooting Apple TV's, as well as forever returning them for free replacements as they experience a variety of problems, locked screens, failure to pair with a remote, etc.
Apple knows the fix for this is a reboot, so why is that not an express lane answer??
Very frustrating devices, ITunes does have the best content, and the highest prices. But I suggest use your apple tv for watching Netflix at $8 / month rather than $5 / movie. Especially when they do not seem to care enough to fix bugs like this so we can enjoy the pleasure of overspending for their content without extreme frustration.
Imagine three kids with Apple TV's in their room. (we do not have cable). A thousand "Dad, can you come fix my Apple TV again".
Signed, the 24 hour on call IT man because I was stupid enough to invest in so much apple product.
Bottom line? Anytime anything goes wrong with your Apple TV, it's not you as long as you have Internet, it's Apple, reboot when in doubt, or unplug and replug, even better. -
"apple tv can't connect to the server at this time. please try later."
anybody else getting this error on apple tv after upgrading? 'unable to sign in' 'apple tv can't connect to the server at this time. please try later.'
• I was happily watching all itunes media on my apple tv but then apple tv asked me to upgrade.
• I upgraded.
• Now it can't connect to any menus related to the itunes store.
• I verified I have the latest upgrade to itunes.
• Homesharing is turned on.
• I have restarted apple tv numerous times.
• I CAN'T watch or listen to itunes 'movies', 'tv shows', 'music', 'podcasts' via apple tv.
• I CAN watch netflix, youtube, movies on my mac, itunes radio.
• I CAN connect to the itunes store via my mac.
• I get this error on apple tv 'unable to sign in' 'apple tv can't connect to the server at this time. please try later.'Lets be frank: this is an internal server communication issue at Apple that they don't want to fix or acknowledge. This "unable to sign in" or unable to communicate issues are all about purchase validation ONLY. That is where it hangs up. For example, I can see favorites but it won't access my list of purchased items. And yet - the only advice they have is reboot?
The same issue happens when trying to watch Netflix on ATV. It can't connect to the Netflix server but gosh golly gee, I switch to my Roku box and no problem. Unfortunately for Apple, while I'm over there I'm starting to to buy movies and shows from Amazon
Apple doesn't make it's money from the $99 Apple TV sale - it's the iTunes purchases. If we want them to listen we need to interrupt that revenue stream. -
My contacts will not appear on my computer and when I go to the webpage for Icloud, it says there is an error and that I can't connect to the server. (which may have something to do with the facts that my contacts have disappeared.)
giddeonsmom wrote:
i have a iphone 3g i have been tryin for 2 hours to sync the music on my phone to a new computer without it erasing everything. can someone please help me
The iphone is not a storage device.
The music sync is one way - computer to iphone. The exception being itunes purchases.
You need to copy everything from the old computer, or your backup copy of your old computer, to the new one. -
How can I connect to SQL Server CE?
Hi!
How can I connect to SQL Server CE ?
Any idea?
I found jdbc driver for SQL Server 6.5,7.0,2000.
But no driver for SQL CE.
Thanks for any suggestion....I am also searching for same answer.
I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
I am stuck in driver problem. I can't find that.
Should I use Oracle Lite or PointBase?
I am under a lot of stress... like you've been...
I wish you find and post that.... -
remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineerthis issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43 -
Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
error showing up, there is no auth-master file in /var/run/dovecot
this has just happnened over night
any ideas how to re-install dovecot
google search goes on about linux but barely any info about max osx serverauth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.
-
Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
0 66 1 0 11:06AM ?? 0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
74 225 66 0 11:06AM ?? 0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501 952 947 0 3:52PM ttys000 0:00.00 grep mysql
Please help!!Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating. -
I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
unavailable"
PS I tried a lot of solutions from different articles, but the same result.
presented below my environment:
Two Lync 2010 frontend servers with one pool.
Two edges server.
HW load balancer.
Log from Lync connectivity analyzer.
User Name: [email protected]
Logging test parameters:
SIP Uri: [email protected]
Discovery Type: Automatic Discovery
Network access: NetworkAccessExternal
Selected client: ApplicationLyncMobile2010
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.xxx.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.xxx.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.Hi
Is that Port 443 opened? check the fire wall.
is that external Lync clients are logging in with out any issues.
by seeing the Log it is unable to connect on port 443
Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting the Mobility issues follows this
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
Safari Not Loading Web Pages (Safari can't connect to the server)
I'm seeing increasing problems with Safari being unable to connect to websites. When the problem starts to manifest itself you see the error:
Safari can't connect to the server.
Safari can't open the page.
Then you see the URL information. It is always seems to be sites that are trying to load HTTPS pages.
Clearing the cache and resetting Safari will make it go away temporarily, but it always comes back.
Note that when this happens you might happen to see something like this in the address bar:
file:///Applications/Safari.app/Contents/Resources/I'm having the same problem, I can open safari but when I try to go to a website it just says "server stopped responding." I just updated to the new version and that's when it started happening, it was working find before the update. Any suggestions???
-
*URGENT* How can i get a website to load instead of saying "Can't connect to the server"
My computer is not loading a website. This is urgent for university work!! My computer keeps saying: "Can't connect to the server" no matter what internet browser i use, and other people with Mac's can use it fine! I need it for university work. PLEASE HELP ME!!
Power off the router. Unplug it from the wall. Wait few minutes.
Plug it back in. Power on the router.
Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect Proxies if selected.
Safari > Preferences > Advanced > Proxies:
Click "Change Settings" button
The network preferences window for Proxies will will show up with "Proxies"
tab selected.
Under "Select Protocol", uncheck any box if selected.
Click "OK", then "Apply"
Maybe you are looking for
-
Automator - Can I automate opening and closing an application?
Hi, I am just starting to use Automator and I would like to get my computer to open a programme at a certain time and then close it again. Finder has the action 'Launch Application' but does not have 'Quit Application'. I have figured out how to link
-
Extractor for Vendor Classification as hierarchy
Hello, The standard don't extract more than one value for the classifcation. Then, I want to extract this data as a hiearchy. Example R/3: Vendor Classification V1 G1 V1 G2 V2 G3 V3 G1 V3 G3 Then, the datasource should create this hierarchy: G1 ...
-
I want to enable an disabled account how do i do that?
i disabled an account that i had about 2 years ago because someone else was trying to get into the account... and now i have realized i bought about $100 dollars worth of music and i want to get some of that music back. how do i enable my account aga
-
Problem installing iphoto 6.0.4 upgrade.
G5 Imac running 10.4.7. and iphoto 6.0.1. On attempting to upgrade to 6.0.4 the message "You cannot install on this volume. An eligible iphoto application was not found in the location/ Applications/iphoto.app." This is exactly where the iphoto folde
-
Hello all, I've got my iPod touch language set to Russian, and regional settings set to English Canada. When I reply to a message in Mail, the language of the bits added by the app (forwarded message begins, replying to, from, to, etc) are in Russian