ITunes can't connect to server after update (window7)

After I installed itunes 12.1 on my laptop that uses windows seven, I cannot connect to the itunes store. The error it says is
"Itunes cannot connect to iTunes Store, Make sure you network connection is active and try again"
I have tried to solve it by flushing DNS settings, but the problem still persists. As for the pop up blockers, I don't really know which popblockers i need to get rid of. I got this information off of iTunes for Windows: iTunes Store connection troubleshooting - Apple Support
I ran a diagnostic and this is the error that popped up. PLEASE HELP! I HAVE TO USE ITUNES TONIGHT.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Similar Messages

Outgoing mail can't connect to server after update

I updated my iphone and ipad and desktop when the new update came out. My email works only on my iphone and ipad. My computer recieves messages, but can not send them. It says it is "offline" and "can't connect to server" uggggh. This has been going on for at least a month now. I called Time Warner Cable and they basically said they could not help me.
PLEASE HELP!!!

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.

Apple tv can't connect to server after update

I just updated my apple tv after being bugged constantly to do it. Usually it takes only a few minutes, but this time it took about 90 minutes. Now, even though I can connect to you tube, trailers, and the main splash screen comes up, I cannot log in or connect to the server. What is going on????

Saw some other posts which said to unplug for 30 seconds... that worked!

Can't connect to wifi after updating to iOS 6

can't connect to wifi after updating to iOS 6

really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

Can't connect to server after binding to domain

Hey there, I need to join my MacBook Pro to a Windows Domain, I followed all the instructions to set up Directory Access and am able to bind the computer to the Domain, but when I try to connect to server I get the error message: "Can't connect to Server: Directory Services may not be installed on the remote server, they may be turned off, or the URL may have been entered incorrectly."
None of the reason noted in the error message are true, so any idea of what the culprit may be?
Thanks,
Tim

Anyone? This is really driving me batty - I can not figure out why it won't connect...

Can't connect to Internet after update

I've had this issue before but I was atleast able to get on iTunes & firefox. After this update my comp can't connect to the Internet period. I called my cable company & everything was working fine on their end. My modem communicates that it's linked my comp by a flashing light. In network prefrences my Ethernet says connected. I do not use a wireless router. I went to the Apple store & managed to get a connection smoothly. After I did the update was when my comp was unable to connect to the Internet, firefox, safari, iTunes NOTHING. I don't have any anti virus programs on my comp.
Help anyone?

Anyone???? This all happened after the 10.6.8 update...at the Apple store my Internet worked fine. Once I get this resolved I'm never updating again!

Can't connect to Server- Software Update

Hello everyone. I recently bought an eMac off of eBay and I wanted to do a software update, but when I do so it tells me that there was a network problem, so when I run the network diagnostics it tells me that while I'm connected to the internet, it can't connect to the server "boemac2.jackson.k12.ga.us"
I don't know what that server is, I'm using a cable router for my internet connection. But I really need help because it won't let me install newer programs such as Safari 3 without the latest security update.

I got the same message in the last few days on my iBook G4. It appeared after an update. I then found that Safari also failed to work but Firefox was OK. In addition I couldn't connect set up my wireless connection at home although my MacBook worked fine.
Go into System Preferences then Network. Have a look at Built-in Ethernet by clicking on Configure. Now look on Proxies. Has a tick mysteriously appeared on the Web Proxy (HTTP) setting and the FTP proxy set to 127.0.0.1? Mine certainly had altered despite the fact that the padlock symbol was clearly closed and no alteration should have been possible.
If you find it simply remove the tick and save the settings. Restart the Mac and with a bit of luck it should be resolved.

I can't connect to server after installing router (WRT54G2)

Anyone please help. I can't seem to connect to the server, 192.168.1.1 after installing the router. Prior to installation it worked fine. Weird thing is I can connect to the internet through the router and stuff, just can't access the server. Help... thanks

First of all check the physical connection....From modem to the router on internet port and from the computer to the router on ethernet port1...Power light shoul be solid and there should be wlan,internet and ethernet port1 light.
Now check for the ip address...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway... IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you are not getting the correct ip address then, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Sony Bridge Can't Connect To Internet After Updating To Mountain Lion

I've tried multiple times now, to get Sony Bridge to check for updates, but every time I try, I get the following error:
Cannot Check For Updates (no internet connection)
I'm on a 2008 iMac, connecting with a Live With Walkman.
My Mac is online and the problem only occurred after updating the OS to Mountain Lion (10.8).
Thus far I've tried going into the user library, and have deleted the two Sony folders present in the Application Support folder, but to no success, I still get the same error.
I'm firing this up regularly to see when ICS is going to drop in Belgium, so I'd be keen to hear of any possibile solutions. Thanks.

Hello OneManLaptop
ML came out 3 days ago...There is as of right now no tested version of Bridge for MAc available for it.
You will need to wait for the Update of the application but right now we can't provide a ETA for it.
Sorry for the inconvenience that this may cause you.
Francis.

Can't connect to internet after updating new Firmware wrt54g Help please!

So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

I am having the exact same problem.. I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help.. It says if you can't access the web based page then to use the TFTP utility to re-flash the router’s firmware but it seems it cannot make a connection to the router.. I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router.. I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well.. So what gives? I followed the directions but the only thing I seemed to accomplish was to brick my router.. Does anyone have a clue on how to go about fixing this problem? Any help is appreciated..

Itunes can't find my iphone after updating to ios7 !

iphone 5
last update of itunes !
i tried to update to ios 7
Now , my iphone just can't connect with the itunes !
and it show the picture of the caple and itunes !!
what should i do !!!!!!!!!!
i don't know what's wrong !
please help i feel bad

make sure you have itunes 11.1 installed

Can't Connect to WiFi After Updating To 2.2

Hey guys,
I just updated my software to 2.2, and now all of a sudden i can't connect to my wireless router at home. I can easily connect to it using my phone, but can't using my ipod. I've searched around a bit, and still can't find a solution.
When i go to settings, WiFi Networks, then i click on the blue arrow next to my router name, the only thing that is entered is my i.p address, and subnet mask. The router and DNS fields are blank. The i.p address number that was automatically entered into it is 169.254.46.155, and the subnet mask is 255.255.0.0
I have tried resetting the network settings, and turning my D-Link DI-524 Router on and off, but still no luck. In Safari i get the message "Safari cannot open the page because it is not connected to the internet" even though the wifi logo is active on the top, and it has a full strength bar of 3 bars.
Any help guys? It's really starting to **** me off. Is it a problem with 2.2 in general? My router doesn't have a WEP key by the way. I chose not to give it a password.
Cheers for the help.

Thanks for your offer to help.
I have wasted considerably more time than Mike even - let's say 24 hours spread over 4 weeks trying to get a Touch to connect to my wifi network. For the first two weeks, the Touch saw my network but refused to connect. It had a self-assigned IP 169 address. I did all the recommendations and suggestions - renewed the DHCP lease (20 times?), reset the network settings (50 times?), restored the entire Touch to factory settings (twice), entered and reentered and double double double checked the passwords and the case sensitivity and so on (more times than it is polite to tell you), and it still wouldn't connect.
Then, last week, it stopped even seeing my network. I suppose the benefit of that is that at least no-one can now advise me to renew the lease or fix the 169 IP - I can't even see the bxxxxy lease or IP setting any more! The error message is "could not find the network xxxx".
So, please do point me in the right direction - I'll be eternally grateful. I've just totally reset the Touch (again) to out of the box factory settings - and it doesn't see the network transmitted from an Apple Time Capsule one foot away from it.
The home network was totally reset yesterday afternoon, so I do know what the settings are.

Ipad 2 can not connect to server after 2 day internet outage

Situation:
Internet access was down 2 days and was just restored
Restarted router
iPad 2 connected to appropriate wifi network, but got error message "could not connect to server" when using Safari. Also, could not access any other internet related service like web email.
Other devices --- iPad air, Mac, PC laptop and 2 iPhone 4s ---- were able to connect and access internet successfully.
Actions Taken:
Powered off iPad 2 and then restarted it. No luck.
On iPad 2, turned off wifi setting and then turned it back on. It connected to appropriate network, but still could not connect to server.
Reset router again --- no luck.
Question:
Any suggestions?

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

I can't connect to WiFi after update

I can not connect to my router and WiFi anymore.

On your Iphone: Do the following: Settings > General > Reset > Reset Network Settings
Then log-in to your Wifi again.

ITunes can't connect to the iPad update server

THIS IS DOING MY HEAD IN.
We recently purchased a Mac Mini to help us manage our iPads. I intend to use Apple Configurator to supervise our 26 iPads but I'm having no luck! Configurator just keeps trying to put iOS 6.1.3 on. I have downloaded the 7.0.4 ipsw and stuck that in the folder, deleted the 6.1.3 ipsw but that didn't work. Then I read somewhere that Configurator uses the latest ipsw that iTunes has downloaded. "Ok" I thought, went into iTunes, plugged an iPad in and checked for an update "The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later" FFFFFFFUUUUUUUUUUUU.
We are on a school network with proxy settings in place. Now, that shouldn't causing an issue as our Windows machines can download updates through iTunes.
I then did some more digging and found a solution that told me to add something to the line that had gs.apple.com in it. Well, our hosts file has no such thing.
(Little more information. The soloution was to: go to finder > press go from the top menu > type in '/private' and hit enter > copy the hosts file to the desktop > add a hashtag and a space before the line that says 127.0.0.1 gs.apple.com.) That line does not exist in our hosts file. I have 127.0.0.1 localhost, and that's it.
Any help would be more than appreciated. Thanks!

Try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

ITunes can't connect to server after update (window7)

Similar Messages

Maybe you are looking for