Itunes can`t connect with the ipad because it is blocked with a code
the thing is the following . I bought an Ipad and they connected it to the computer without synicing it with itunes so I could use it. I used it for a while and inserted a password. After using it I turned it off and when I got home it appears " Itunes can´t connect with the ipad because it is blocked with a code. Insert the code in the ipad to use it with itunes." The point is that I can´t even use it because it says to insert the password and the ipad says that I have to connect it to itunes so no password can be inserted so I can´t use my ipad
You need to start all over from the beginning. After connecting your iPad to the computer, look in iTunes for instructions how to "Restore as new."
Similar Messages
-
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
ITunes could not connect to the iPad because it is locked with a passcode.
I just bought a 64GB iPad in France on my journey. In Denmark we haven't got it yet, so there's no support for me yet...
In the french store they let me connect to iTunes on one of their Macs, so I could enter my new iPad. Then I played with it the rest of the day (didn't sync with my MacBook, cause it is being fixed) and also put in a pascode as I do with all my devices.
Next morning when I turned it on, it only showed the "connect to iTunes" symbol again, as if it was new. And when I connect to iTunes, iTunes only says "iTunes could not connect to the iPad because it is locked with a passcode. You must enter your pascode on the iPad before it can be used with iTunes"...
And that is a contradiction! I can't do what the iPad says and i can't do what iTunes says...
Any ideas? Any ways to reset it other than by holding down both buttons at a time, because I have tried that already.
Hopefully someone can help me, I really want to be able to use my new iPadpathfinder172Jun 1, 2014 8:05 AM Re: iTunes could not connect because it is locked with a passcode...?
Re: iTunes could not connect because it is locked with a passcode...?in response to rhmcolvin
I have a much easier possible solution!!
I had this same issue, trying to connect my new iPhone 5s to my Windows computer's iTunes. I was getting two different error messages:
- iTunes could not connect to the iphone because it is locked with a passcode
- iTunes could not connect to the iphone because the device timed out
I found this thread, but did not like the idea of having to restore my iPhone and losing all my settings/data on the phone. After trying several different things, I discovered that I had 5 devices listed under my "Devices" that were authorized, so the real issue was that I had reached my limit. I had several issues with my old iPhone 5s, and had to have it replaced twice. As a result, I had several old iPhones listed under devices that I no longer had. Erasing those solved the problem, and my new phone connected just fine to iTunes. To get rid of the old devices, you can:
Open iTunes
-> click on "store" in the upper left corner
-> from the drop-down menu, select "view account"
-> enter your password
-> under "iTunes in the Cloud", click on the blue "Manage Devices >"
-> remove any old devices
This solved my problem. Hope it helps others as well! -
itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync
Actually I'm the nanny of a 6 year old girl. And is her iPad, my boss needs that this iPad work again because the little girl is making everybody crazy. Please helpppppppp
-
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."PHONE LOCKED
If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212 -
got a itouch on ebay and it says ipod is disabled and i connect to my computer itunes it tells me itunes could not connect to the ipod because it is LOCKED with a passcode you must enter passcode on ipod before it can be used with itunes. I asked people I
iOS: Unable to update or restore
-
Forget iPhone password, when connect to computer "iTunes could not connect to the iPhone because it is locked with a pass code. You must enter pass code on the iPhone before it can be used with iTunes."
You have to restore it using a computer with iTunes per the knowledge base article above.
With iOS 7, if you have Find My Phone turned on you can login to iCloud from a computer and send an erase signal to the iPhone to clear it...that will erase all content and settings. -
itunes could not connect to the iphone because it is locked with a passcode...
I hit this problem when updating my iPhone. I was about to put it in recovery mode (http://support.apple.com/kb/HT1808) and restore it but first I tried updating iTunes. Suddenly the phone sprang back into life!
-
Itunes could not connect to the ipad because an invalid response was received from the device
Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now. -
Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115 -
Hi,
For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes'.
The problem is, I can't enter my passcode because I'm not given that option on the iPhone. All I seem to be able to do is make an emergency call.
It's been working fine otherwise. Any suggestions?
This is the SECOND replacement iPhone I've had this week and I'm getting a bit fed up.
Thanks in advance for any help,Are you referring to the 4 digit passcode needed to enter the phone and use it's features?
If so reboot your iPhone and enter the passcode to get it operational. Launch Image Capture on the Mac and connect the iPhone. Now you should be able to download the video files to wherever you want on your hard drive.
OT -
Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?
Place the iPod in Recovery mode and then restore.
-
"iTunes could not connect to the iPod because it is locked with a passcode"
"You must enter the passcode on the iPod before it can be used with itunes."
I tried! Everytime i try to turn on my ipod it comes up with the sync to itunes screen. then i try to sync to itunes and i get the above message. i don't get it! I haven't had itunes in quite awhile, it disappeared from my computer sometime ago, and now i tried to download it again and this is what i am getting.
I have no idea what to do! help please?try this:
Jason L wrote:
whitewolf292 wrote:
sorry, I forgot to put what it said. This is what it said, "iTunes could not connect to the Ipod because it is locked with a passcode. You must enter your passcode on the iPod before it can be used with iTunes"
Try connecting the iPod touch to the computer you normally sync it with.
This article: http://support.apple.com/kb/HT1212 provides details about the passcode lock feature.
If you cannot remember the passcode or don't have access to the computer that the iPod is normally synced with, you can restore it from recovery mode and set it up as a new device without any data. This article: http://support.apple.com/kb/HT1414 will walk you through restoring from recovery mode.
-Jason
Maybe you are looking for
-
Some weird behaviour of my Applet
I've created an applet which uses Java2D to blur an image file (image0.jpg)and display it in the browser. I can compile it with no problem but when i run the applet using the browser. The following message appears in the bottom of the browser "Start:
-
XI content certification - ABAP proxies
Hi, can we use <b>ABAP proxies</b> in XI content certification ? I mean develop an ABAP proxy in IR that will be generated in ERP and just supply the code for it ? thank you, Regards, michal
-
I need convert the date of string format 'MM/dd/yyyy' to datetime format 'MM/dd/yyyy' when the system date format is 'dd/MM/yyyy'.Since I need to search values based on date where my database datetime is 'MM/dd/yyyy' format.
-
Wireless connection drops at random
Hi, I have a 27" late 2011 iMAC. Since I updated to Lion my wireless connection drops at random. The wireless symbol shows that I am connected, but i cannot use the internet. The sollution at that time is that I turn off wireless, and than turn it on
-
Lion and PSE 9 unable to view jpeg
WIth the upgrade to Lion I have not been able to view newly imported jpegs in PSE 9. Anyone with this issue? Any fixes or suggestions? Thank you!