ITunes can't import CD

For some reason my ITunes stopped recognizing CDs.
I tried re-installing it, but with no avail.
Does anybody have any idea on what else could be done?
I put CD diagnostics below.
Thanks,
Leonid
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 3000
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82865G Graphics Controller\Intel(R) 82865G Graphics Controller
IDE\DiskWDCWD800BB-75JHC0_____________________06.01C06, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCDRW/DVD_CRX330E___________________MDK3___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY CDRW/DVD CRX330E, Rev MDK3
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 71:52 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 12 16 24 32 40 48.
The drive CDRW speeds are: 12.

lenyas,
Let's start with the support page for your computer. Go there and get the update labeled "Intel Chipset Software Installation Utility". Also if you're using any of the Sonic Solutions applications, install and run those updaters as well.
If that doesn't help, let try a quick experiment:
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.

Similar Messages

  • My itunes can not import or add AVI movie files created by Canon PS SD450.

    How can I play my movie shot by Canon PS SD450 on my new iPOD? My itunes (7.0216) can not import or add the AVI movie file to its library. Please advice.
    Laptop Fujitsu S2110   Windows XP Pro   Canon PowerShot SD450 movie file (AVI)

    I am having the same issue so if anyone knows how to fix it that would be great.

  • My iTunes can't import music after intalled 10.4.11(PPC)

    My laptop is Powerbook G4 1.33Ghz. After installed 10.4.11, I double-click some mp3 songs. iTunes pop-up as usually then it takes no action. Then I try File->import . Not thing happen either.
    and The Safari 3.0.4 from 10.4.11 haves problem, too. I went to Adobe website to download Acrobat Reader 8. I went into the page and select the os version, but the continue button didn't show up. then I used Firefox. It's fine. Can I switch back to 10.4.10?

    Hi, gracebug. Installing and using OS 9 for Classic mode does not require OS 9 drivers to be installed. They're only needed if you want to start the computer up in OS 9, which isn't possible with your Mac anyway.
    See whether these articles help you get Classic support installed, and let us know how you make out:
    http://support.apple.com/kb/TA23296
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh763.html
    Message was edited by: eww

  • ITunes can't import CD's

    I put my CD (not blank) in the computer and it won't show up in iTunes or anywhere else for that matter. It reads blank discs but if it has music or pictures on it it won't show up anywhere. Anyone else having this problem? If so I could use your advice.

    my guess is an incompatible format.
    Are the discs original CD's?  or copies...

  • Must Restart iTunes to Import CD's; If Not, Then iTunes won't Import It

    I am importing my CD library to my new iPod Classic.  I have to restart iTunes before putting in the CD each time I want to import one in order for iTunes to import it.  If I forget and insert the CD with iTunes already up, iTunes can't import the CD.
    I have Windows 7 and have updated iTunes and Windows, installled and uninstalled iTunes, run the iTunes diagnostics which says that iTunes can't read such a disc (other discs are fine to important as long as I don't insert them with iTunes up) I've checked and unchecked various boxes in preferences for importing CD's.  I've also done a driver scan and did a general, authomated, driver update for the computer. 
    Any help would be welcome.

    fane_j wrote:
    By "music CD", do you mean audio CD, or CDDA? Identified by this logo:
    If yes, does it happen with any audio CD, or with just one or just one set of audio CDs?
    If it happens with any audio CD, reset the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>
    If that doesn't solve the issue, test the new user technique
    Isolating an issue by using another user account
    <http://support.apple.com/kb/TS4053>
    I've tested 5 audio CD's that I've purchased in stores. They have the "COMPACT disc DIGITAL AUDIO" logo you mentioned. When I insert them, they spin for about 30 seconds and then eject with nothing launching.
    When I put in a audio CD that I've burned in iTunes (I tested one I burned today as well as one that I burned over a year ago) iTunes launches and the disc and it's contents show up in iTunes under the heading "Devices" in the left menu bar.
    I tried resetting the SMC as well as setting up another user account ...and I had my fingers crossed ... but these efforts didn't fix my problem.

  • How can I import songs that are protected wma

    how can I import songs that are protected wma?

    Sorry, but you can't. iTunes can neither import nor play any protected Windows Media content. You'll have to ask the source of your tracks how to get them unprotected, if such a service is offered.
    Regards.

  • Can't import entire iTunes library from external hard drive

    I recently had to reset my IBM ThinkPad T40 (Windows XP) to factory settings. Of course, I backuped up my iTunes library on an external hard drive, and there didn't seem to be any problems doing so. (I've had to do the same thing before) But I can't re-import the entire library now! It only imports about a thousand songs (I had about 5,000), and I get an error message saying "The file iTunes Library.itl~ cannot be imported becuase it does not appear to be a valid exported file.") I also tried to import a previous back-up (stored in a different folder, and it wouldn't import all of those files, either -- no more than in the more recent backup files) either. I've tried re-downloading the iTunes software several times. Help!!!!
    Thanks!!!
    PS: Is there a way to sync my iPod to import songs from that BACK into itunes?
    IBM ThinkPad T40   Windows XP  

    This seems to have deleted ALL of my iTunes. The folder (and all iTunes files) is still there on my backup, but now the newly-installed iTunes won't import ANYTHING (It at least imported about 1,000 (out of 5,000) songs before. But now it says all files are invalid, regardless of where I attempt to import them from. (although the names of some playlists import -- but they're empty files) It appears that SOME of the music files are located on the backup copy, but simply won't import. Perhaps they're corrupted?

  • Audio CD import is not working the cd is ejected before itunes can read it

    audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
    Lainey

    Does this happen with all cd's or one in particular?
    Reset the SMC http://support.apple.com/kb/HT3964
    Reset the PRAM http://support.apple.com/kb/HT1379
    Try a cleaning disc. You can get them at places like Radio Shack.
    If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

  • Can't import tracks from an older version of iTunes

    Since my rMBP has no optical drive I've found a practical use for my old G3 iMac which is for ripping CDs.
    The G3 of course is only running iTunes 7.6 (the newest version available for G3 Macs) whereas my MBP is running the latest version.
    I've shared the iTunes Library on the G3 and can access it on my MBP, and can even play tracks, but there is no Import button at the bottom of the window so I can't import the ripped tracks into my MBP iTunes. This works fine if I use my wife's MBP (my old one) which is also running the latest version of iTunes.
    Have I missed a setting on the G3, or is this a limitation due to the big difference in iTunes versions?
    I'm ripping to Apple Lossless if that matters.

    Limnos wrote:
    How did you share this library?  If you're talking about what iTunes has, there is a difference between Home Sharing which is a feature of newer iTunes and enable copying fo files, and plain music sharing which older iTunes had but only allowed music to be played.
    Ah, thanks, that will be it.
    Guess that means I can't use my G3 for doing this. Oh well, not to worry.
    Limnos wrote:
    You say, "This works fine," but "this" is vague. Do you mean Home Sharing from your wife's Mac to yours? If so, then yes it will work because they are both capable of Home Sharing.
    Yes, "this" meant importing tracks from the Library on my wife's MBP
    Limnos wrote:
    iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
    Thanks for the link

  • Can't import video (.mp4) to itunes 10.5, pls help

    I can't import video (.mp4 & .mov) to itunes 10.5.2.11 (can't both drag & down and add file to library).
    I searched many ways to solve in google with myself , but still not work
    Pls help -.-"

    MOV is a container format which may contain all kinds of codec, while iTunes only import MOV whose video codec is DV, MPEG-2, MPEG-4, H.264, or AIC.
    Even if the MOV meet the above requirement and supported and playable in iTunes, it will still fail to sync to iPod/iPad/iPhone/Apple TV if the MOV video does not fit the specification like resolution, bit rate, aspect ratio, size, and audio codec of the iPod/iPad/iPhone/Apple TV.
    In order to successfully import MOV to iTunes as well as sync MOV to Apple TV, iPod, iPhone, iPad, we have better convert the MOV video to a more compatible video format.
    Step by step guide on how to convert itunes unsupported mov to itunes supported one at How to Solve Can't Add MOV to iTunes to Play MOV in iTunes/iPod/iPad?

  • Can't Import Songs To iTunes Using Apple Lossless Encoder

    I have about 4,000 songs in FLAC format (which is a lossless format) on my external hard drive. I want to import them into iTunes using the Apple Lossless Encoder. I called Apple support and asked them how to do this, and they told me to go under "Preferences" in iTunes and chose to import using Apple Lossless Encoder.
    I did this using Preferences>General>Import Settings, and then went to File>Add Folder to Library, however, it still imported my songs as AAC Audio Files. Does anyone know what I'm doing wrong? Thanks.

    iTunes cannot read nor import FLAC files - not without third-party plugins, anyway, and I don't know of any that will allow iTunes to convert a FLAC file to another format - so I'm a bit confused as to the procedure you're following. If all you're doing is using the Add to Library command and choosing the FLAC files, it's quite possible that iTunes is misinterpreting the format and adding what is in reality an invalid link with erroneous format information.
    If you have some sort of third-party plugin for FLAC for iTunes, please post that information and perhaps someone here can determine whether iTunes can do a conversion successfully.

  • Can't import videos to iTunes!??

    I've been trying to import videos to itunes and for some reason they just won't go in! I have tried dvdrips and already converted to mp4 files on my harddrive, i've even downloaded the sample movie from the apple website to try and import that.
    When i go to import in the fille menu, find the file and click choose absolutely nothing happens. the finder window closes and thats it. the same happens for add to library function. i have the most up to date version of itunes and my brother has the same mac ipod and itunes version and can do it just fine exactly the same way as i am trying. pretty frustrating can anyone help?? pleases?

    Have you tried using the Finder? Just drag the video files onto Library in the sidebar. iTunes can be unresponsive - don't drop the files until Library (or Movies) turns blue and you see a green dot with a plus sign on your cursor.
    Once your movies are in iTunes, you can convert them to iPod format. Select the movie under Movies, then choose Advanced > Convert Selection to iPod.

  • HT1567 I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

    I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

    Satellite L675-S7113 Specifications (PSK3AU-07C02S)
    Satellite L675-S7113 Support Page
    rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
    From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software,  play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
    Let us know what happens. Good luck.
    Mike

  • I have many of those lost photos on my iPod.  How can I import those to my MacBook Pro without the iTunes synchronization kicking in and removing them?

    I lost rather a lot of photos on a corrupted external storage device.  I have many of those photos on my iPod.  How can I import those
    photos into my MacBook Pro without the iTunes synchronization function kicking in and effectively deleting those photos I want to
    import from that iPod?  Any assistance would be greatly appreciated as those photos now only reside on that iPod...

    The photos you synced to your iPod through iTunes are no longer in their full resolution, but instead are scaled down thumbnails of those photos.  So if you do manage to get them off your iPod, they will be quite small in size compared to the original ones you lost.
    In order to get them off of your iPod, you'll need the help of some sort of 3rd party software. Here is one option.
    http://www.macroplant.com/podtopc/
    B-rock

  • : how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?

    : how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?

    Save the file from Gmail onto your computer and add it to iTunes.  How you save from Gmail is a Gmail question (their own support pages), not an iTunes question.

Maybe you are looking for

  • PR,s not getting generated after MRP run

    Dear All, I'm running MRP through MD51 for WBS element where RM's are attached to WBS. It is MTO scenario where no stocks of RM's are maintained. I have checked all relevant settings of Masters. After running MRP through MD51, system is not proposing

  • Problem in customer address while creating service notification using IW51

    Hi Experts, I am trying to create a BDC recording for creating Service Notification using transaction IW51. I have done the recording as follows. On the First screen I am entering notification type. Then on the next screen I am entering the Sold to p

  • Anonymous PL SQL block runs in 2 minutes but runs for 4 hours in Applicatio

    We are facing an issue with a custom code. When we run the custom code as anonymous pl/sql block , it completes in 2 minutes. But when we run the same from Oracle Application as a concurrent program, it runs for more than 4 hours. There is absolute n

  • Preview layout completely different to design layout.

    Newbie here so sorry if it's a lame question ! When I make an alteration in the design module and then save it, when i go to preview it is totally messed up. Even similar pages done from the same master page look randomly different in preview. Just c

  • What do you display on your wallboard?

    My current setup alternates between the Service Management information above and some server / infrastructure monitoring info. Though to be fair on most days its the Service Management, particularly the Trending / Proactive reports that it shows that