ITunes can't read iPhone 5

every time i plug my iPhone into my mac book pro, it tells me it can't read my iPhone and i need to restart my phone. How do i figure out if my settings and iPhone have already been backed up? I know i have backed it up on iTunes in the past, just not sure how long ago. I just want to be able to play music on my iPhone. I have had to delete my music on my phone before to make room for updates and such. and now iTunes can't read it. I don't get it

Hi Natropolis,
If you would like to see the last time your iPhone was backed up to iTunes on your Mac, you may find the information in the following article helpful:
iTunes: About iOS backups
Regards,
- Brenden

Similar Messages

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

TS1363 itunes can not read the contents of the iphones "iphone 5s" go to summary tab in iphone preferences... . "what is this means?" "what i do????"

itunes can not read the contents of the iphones "iphone 5s" go to summary tab in iphone preferences... . "what is this means?" "what i do????"

Hello there, Choochg.
The following Knowledge Base articles offer up some great steps for how to restore your iPhone:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
and
iCloud: Restore your iOS device from iCloud
https://support.apple.com/kb/ph12521
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Itunes can't read songs to sync. Every few songs Itunes stops the sync because it can't read the song.

When I sync my ipad or iphone, Itunes will start syncing but after every few songs it syncs, itunes interupts the sync with a message saying it can't read the song. I can go to that song in my list of music and play it in itunes but itunes can't read it to sync. This has just started happening in the last week, 06/28/13.
Does anyone know what is going on. The message is as follows: iTunes could not copy "such and such song" to the iphone because the file could not be read.
rhpiper

I didn't understand what you mean. Most of the songs itunes flags are songs I have had on my list for a long time. I did notice something else. After it sends me the message and stops syncing. I press the apply button and it seams to save the song. Then I have to start resyncing and I noticed it syncs the song that it just previously couldn't read. The problem is I have to do this 50 times to get through a sync. Also, Itunes never stops on the same songs that it did the prior sync.

Problems syncing 3GS with iTunes: Can't read content

I have a 3GS and when I try to sync it, I get an error message saying that iTunes can't read the content of my phone. (I've tried syncing on mulitple computers and get this message each time.) Interestingly, iPhoto opens and has no problems. iTunes gives me the option of restoring to factory setting but then I'll lose everything. I've deleted and reinstalled iTunes, but got the same message. Any help is greatly appreciated.

Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Unknow Unknow
iTunes 9.0.2.25
QuickTime 7.6.4
FairPlay 1.5.23
Apple Application Support 1.0.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 1EF1C12022EC1349
Current user is an administrator.
The current local date and time is 2010-02-02 10:48:08.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8800 GTS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 609cad034d02d81a6e972fa719294ffa
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {1BDDB5C0-B0E8-4599-99BE-F32FC4E1C966}
Description: Realtek RTL8168B/8111B Family PCI-E GBE NIC
IP Address: 192.168.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Tue Feb 02 10:35:23 2010
Lease Expires: Fri Feb 05 10:35:23 2010
DNS Servers: 192.168.0.1
192.168.0.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple website was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-02-02 10:41:28.

ITunes can't read my iPod touch

Help me iTunes can't read my iPod touch

If this is not the problem then what do you mean by "can't read"?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

ITunes can't read or write to iPod -- won't sync

Classic 30 Gb iPod approx 1 yr old, Windows XP Pro, iTunes 7.5. I added some new trax to iTunes to make total approx 5800 trax, 18 Gb. When I attach the iPod it will load approx 130 trax, 380 Mb, then get msg that iTunes can neither read nor write to the hard disk. The loaded trax will play. I have done the 5 Rs many times, sent the iPod to Apple twice, deleted iTunes many times, deleted the iTunes library and partially reloaded my CDs, all to no avail. I am convinced that I have an iTunes prob because a) Apple can't find a prob and b) I can load my wife's library of approx 1000 trax, using her computer w 7.5

hi, im also having a similar sort of problem. previous generation iPod video 80Gb version, windows vista 32bit and itunes 7.5(although the problem also occurred with the last 7.4 update).currently the iPod is empty, and out of the 9364 songs (50.01 Gb) in my itunes library, less than 100mb will be synced to my ipod before the sync simply cuts out, like it had completed the sync normally. I have taken the ipod in to an apple store and it synced perfectly with a mac. I have also tried removing and re-installing itunes, even deleted the preferences and other app data that normally gets left in the computer, and i also tried restoring the ipod to factory settings several times to no avail... oh, and i also tried using different cables to connect the ipod, incase the cable was loose, but that didnt work either.

OS 10.7.5, iTunes 11.0.1, and iOS 6.0.2 ... everything is updated, but iTunes won't read iPhone 5 or iPad. Suggestions?

OS 10.7.5, iTunes 11.0.1, and iOS 6.0.2 ... everything is updated, but iTunes won't read iPhone 5 or iPad as devices. Syncing was easy before recent iTunes update. Suggestions?

Are you using the correct cables. iPod cables look similar, but are not, as they are 1.1 USB cables, where your iPhone and iPad require a 2.0 USB cable.
Also, make sure you are not plugging your USB cable into a Hub or keyboard USB port, but one directly on the computer.
You may want to reset the USB ports, by resetting the SMC and PRAM
HT1411 - Apple Portables: Resetting the System Management Controller (SMC)
HT1379 About NVRAM and PRAM - http://support.apple.com/kb/HT1379.

I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restore bcause there are files that are used by other application. I am having Widows

I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restored bcause there are files that are used by other application. My iPOD appears in My Computer in drive H as a mass storage generick volume

Try disabilng the Enable Disk Use option from under the iPod's Summary tab, applying the changes, and seeing if that helps.
Otherwise, temporarily disabling any antivirus, security, firewall, or file indexing software that may be running on your system and then try restoring your iPod again.
B-rock

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

problem solved.
I phone 4s screen froozen

ITunes can't read my iPod Video 5th Generation

Hey guys,
So my iPod was messed up for a while back, but I managed to reset/restore it so it's basically at a clean slate. Now when I plug it into my computer, it shows the normal "Do not disconnect." screen and it even shows up on My Computer.
The problem is: iTunes can't read it. It shows nothing on the side panel of iTunes. I tried doing all the device manager things and everything seems to be good. I have an iPod Nano 3rd Generation and it works perfectly well on my iTunes when I plug it in.
Any suggestions on how to get my iTunes to read my iPod Video 5th generation?

Watcha,
I haven't had any of these problems yet, but getting ready to download the newer version of Itunes. I have a HP Pavilion PC-based laptop with Windows 7, and also an IPOD Video 5th Gen. So I really hope I won't get any problems. Sorry I didn't have any solutions and hope your problems were solved.

Itunes can't read my ipod because it's locked.

my ipod must be restored each time the battery runs out. Now it has a lock code and itunes can't read it. I have to enter the code in the ipod but it doesn't work. What I should do?

Connect the device to your iTunes library in recovery mode using the instructions in the Apple support document below and restore it to factory settings.
http://support.apple.com/kb/ht1808
B-rock

I have restored it many times, My iTunes can't read the contents of my iPod

I have restored my iPod 3 times already. It worked out after each restore of my iPod for a while. Then the message said "iTunes can't read the contents of my iPod" is still brought up while my iPod is connected. I just restored it again and it was my fourth time. Can anybody help me out fix this problem!?
iPod 20GB 4th Generation Windows XP

Yeah, this is a pretty bad move from apple, looks like iTunes 7 killed my iPod w/Color Display...
It worked fine, until one day itunes started givin me those error messages ultil one day my ipod wouldnt turn on again...
Now it only shows a Folder with a exclamation point in the screen...
I'm taking it to a apple store asap, as it only has just 23days of warranty left

My iTunes can not read a file, because its created by a newer

My iTunes can not read a file, because it's created by a newer!!!
The file is: iTunes Library.itl
I hope you can help me!!
Bye tokiodrift

You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2

ITunes can't read iPhone 5

Similar Messages

Maybe you are looking for