Itunes can't read my ipod because it's locked.

my ipod must be restored each time the battery runs out. Now it has a lock code and itunes can't read it. I have to enter the code in the ipod but it doesn't work. What I should do?

Connect the device to your iTunes library in recovery mode using the instructions in the Apple support document below and restore it to factory settings.
http://support.apple.com/kb/ht1808
B-rock

Similar Messages

  • ITunes can't read my iPod touch

    Help me iTunes can't read my iPod touch

    If this is not the problem then what do you mean by "can't read"?
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Error: iTunes could not connect to iPod because it is locked with a passcode.  You must enter your passcode on iPod before it can be used with iTunes.  We do NOT remember the passcode used.

    I am trying to restore my son's iPod Touch 4th generation. I went about 20 minutes into the recovery process and got the error message, iTunes could not connect to iPod because it is locked with a passcode you must enter your passcode on iPod before it can be used with iTunes. The whole problem started with my son putting in a password that he has now forgotten. How do I get passed this? 

    its the 1st time ive heared of this
    can u link it to an computer to add music?
    if so you should be able to restore it
    connect to itunes under  the devices tab click on the ipod now click summary on the top
    on the page you should see and check for update's or update tab
    below that there should be an restore tab just click on the restore tab
    NOTE RESTOREING WILL DELETE EVERYTHING YOU ADDED TO THE IPOD AND IT WILL BE BACK TO FACTORY SETTINGS

  • My iTunes can not read a file, because its created by a newer

    My iTunes can not read a file, because it's created by a newer!!!
    The file is:     iTunes Library.itl
    I hope you can help me!!
    Bye tokiodrift

    You need to restore the pre-upgrade backup of the library file in the manner shown in  Empty/corrupt library after upgrade/crash.
    tt2

  • ITunes can´t read my iPod touch 4g

    My iTunes can´t identify my iPod, i uninstalled and installed iTunes like seven times, I also installed and older version, I had been reading all the comments on the support center and I can´t connect it to itunes, my computer does read it, but iTunes does not, and it only appears a pop up from iTunes that says "This iPod can not be used, because you haven´t installed the software. Run uTunes installer to uninstall iTunes, and then; install a 64 bit version of iTunes" I already did what that pop up told me like 10 times, and I can not read it, please help me. (Windows 8 64bit version) THANKS

    If this is not the problem then what do you mean by "can't read"?
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • HT1414 ipod touch..when I plug in to laptop, itunes, I get this message.  "Itunes could not connect toehe Ipod because it is locked with a passcode.  You must enter your passcode on the ipod b/4 it can be used with Itunes"  It is stuck on the cord/itunes

    ipod touch..when I plug in to laptop, itunes comes up and I get this message.  "Itunes could not connect to thehe Ipod because it is locked with a passcode.  You must enter your passcode on the ipod b/4 it can be used with Itunes"  It is stuck on the cord/itunes screen and cannot go any further...HELP

    Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

  • ITunes can't read my iPod Video 5th Generation

    Hey guys,
    So my iPod was messed up for a while back, but I managed to reset/restore it so it's basically at a clean slate. Now when I plug it into my computer, it shows the normal "Do not disconnect." screen and it even shows up on My Computer.
    The problem is: iTunes can't read it. It shows nothing on the side panel of iTunes. I tried doing all the device manager things and everything seems to be good. I have an iPod Nano 3rd Generation and it works perfectly well on my iTunes when I plug it in.
    Any suggestions on how to get my iTunes to read my iPod Video 5th generation?

    Watcha,
    I haven't had any of these problems yet, but getting ready to download the newer version of Itunes. I have a HP Pavilion PC-based laptop with Windows 7, and also an IPOD Video 5th Gen. So I really hope I won't get any problems. Sorry I didn't have any solutions and hope your problems were solved.

  • ITunes can't "read" my ipod nano

    So, I got an ipod nano for Christmas. I've already got a bunch of songs in my library because I used to have a different ipod. But eveytime I try to plug in my nano, a little bubble pops up and says, "iTunes cannot read ipod 'J:/'." and then it tells me to restore the ipod to its facorty settings.
    Well, I've now restored it to it's factory settings a grand total of 7 times, and no luck. The same messages just keeps popping up.
    Someone help!!!

    Me too. Except I can't even restore mine because it says i'm not connected to the internet when I am.

  • My ipod won't sync any of the music i downloaded and says that iTunes can't backup the Ipod because a session couldn't be started with the Ipod how do i fix this

    My ipod won't sync any thing in my iTunes library it always stop as soon as it starts backingup the Ipod a message appears that says iTunes cannot backup the Ipod "my Ipod" because a session couldn't be started withthe Ipod how do i fix this problem?
    This is exactly what the message says: iTunes could not back up the iPod "austins ipod" because a session could not be started with the iPod.

    Try connecting your ipod to another computer and sync only 1 file or song just for isolation purpose only to see if it'll sync.
    If still not syncing, then porbably you may have a bad iOS installed in iPod which is hard to see if it has a problem because you said nothing's wrong with iPod. I just saying is, it MIGHT have a bad iOS.
    If you are unable to do a restore, put your ipod in DFU mode, then connect to iTunes and iTunes will detect your ipod in restore mode. Press shift key (PC keyboard) then click the restore button on iTunes. I hope you have your copy of IPSW file for restoration purposes.

  • HT201210 iTunes can't sync my iPod because the connection was lost.

    I have been having some issues with backup and sync for the past week or two with my iPod Touch.  I am being told by iTunes that it cannot sync with my iPod because the connection was lost.  I tried a different cable and still no luck.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    Next
    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • Itunes can't "read' my iPod.

    When ever iTunes tries to update my iPod with the latest CDs I've transfered it says that "The iPod cannot be updated. The disnl could not be read or written to." What does this mean. I've transfered CD's to my iPod before. HELP!

    Here, please read this for your solution:
    Disk cannot be Written Too -
    http://docs.info.apple.com/article.html?artnum=301267

  • Couldn't remember the passcode for my daughters ipod. Now says it is disabled and to connect to itunes. itunes says it cannot connect ipod because it is locked with a passcode...i found where a site is giving firmware, but I don't know which one to choose

    My son the forgot password on his ipod and it's disabled, but when we do the restore through itunes it says it can't because it's locked with a passcode. Then I found a link to a site that helps with firmware, but I don't know which firmware to pick? Please help!

    iOS: Forgot passcode or device disabled - Apple Support

  • I forgot my passcode, so now its disabled and it said i need to connect to itunes. But now i connected and its saying it can't open my ipod because it's locked. What do I do?

    I forgot my passcode to my ipod, so it said ineeded to connect it to iTunes because it's disabled. So, i connected to itunes and it said "Ipod cannot be used because it's being locked with a passcode. Unlock passcode and try again". Well i dont know my passcode and its disabled so i can't do anyhting. Now what do i do??

    Try connecting your iPod Touch to iTunes in recovery mode, allowing you to bypass the need to enter in the forgotten passcode.  See this article for instructions on getting your iPod into recovery mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • ITUNES CAN'T READ MY IPOD BLACK VIDEO 30G! WHY?

    My computer was running slow and I had itunes and photoshop open. And then next thing I know, my itunes stopped responding and then my photoshop cs2 was responding. So I tried to eject my ipod, and then restart my computer. It wouldn't do it for ages. So I gave up, and turned my mac off, and then then when I loaded it back up, it said.... ITUNES CANNOT READ THE CONTENTS OF THE IPOD. and I've got all my music on it and video and it's all wiped. Which all my music and video's are on my home IMAC, which is back in the UK. I am in South africa for another 3 months meaning no music and no videos. Is there any way of retrieving my music back- please?
    There is another query. When I plug my ipod in, it still recognises the name of the ipod. And when itunes loads up, it says the message above. But if I don't click that and actually click on the iPod icon on my desktop, I have a 'faded out' folder called- iPOD CONTROL. which if I follow it brings me to a list of audio files which is my music but random file names like WENM.wav etc. So I know the music is on there. Is there anyway of restoring my iPod with out formatting it? There must!! Please help.

    It was worth a shot... anyway, since you can see the music on the iPod via Finder, you might want to consider moving that music from the iPod to your hard drive, listen to the file to determine the name of it, put it into iTunes, restore the iPod and then sync the iPod. You can also seek third party software that might be able to recover the files from the iPod, but given the issue you're having, that might not be an option.
    Check out this post from Zevoneer for some iPod recovery options.
    http://discussions.apple.com/thread.jspa?messageID=6273675&#6273675
    CG

  • My iTunes can't read my iPod!!

    Hi, I own an old iPod. I don't know exatly what's the model, but it's a 2005 nano. I have always synced it with my itunes without any trouble. Today I updated my itunes (last update)and when I connected my iPod it gave my this message: "use itunes to restore". But I can't even find it in itunes, it won't read it. Does this have anything to do with the itunes' update? so, I won't be able to sync my iPod with futures itunes?
    Any help is appreciated.

    Hey, I'm having a similar problem - did you find anything out?? Thanks!

Maybe you are looking for

  • How to Capture print jobs and Data with WIN32 API?

    My organization has about 5 network printers and copiers to which a computer can print. What I'd like to do is build, if possible, a simple JAVA program to intercept what the users are printing (from any application) and capture certain information a

  • My Skype number is not ringing

    My skype number is not ringing or answering when it called it worked great for a few weeks

  • VS2013 CE - how to disable from different Menus / Options temporarely unneeded things (VB,C++ etc)

    Hello, I mainly want to use VS2013 for programming things in C# ... In different Menus I get the full Options/Customization for every Language VS2013 supports, that is a bit timeconsuming to sort things out etc. Is there a way to hide these options t

  • About create BP in CRM

    hi, Experts   I call the function "BAPI_BUPA_FS_CREATE_FROM_DATA2" remote to create BP data in CRM.   the return message is "Instance BJXE001005 belonging to object type BusinessPartnerFS was created". But the BP "BJXE001005" has not been successfull

  • PR and RFQ usage upto the target quantity

    Hi, How to restrict the PR and RFQ up to the target quantity as a reference. The PR and RFQ should not be available, after the target quantity as a reference. Thanks in advance Vikram