ITunes cannot connect to iPhone because pairing record missing

I was able to connect my iPhone to iTunes once and was able to sync. Now i recieve a message saying: iTunes cannot connect to my iPhone because the pairing record is missing. What do I do?

BPH108,
I had the same exact issue. What solved this for me was to unplug my phone, shut down ITunes, shutdown my phone (Not just shut down but hold the home and lock button until it shuts off), start my phone back up and start ITunes back up. Then when I plugged my phone back in it worked like a charm!
Hope this helps!

Similar Messages

  • Itunes cannot connect to iphone because iphone is locked and in lost mode

    what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''

    vineetvasudeva wrote:
    what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''
    Then take it out of Lost Mode the same way you put it into Lost Mode:  via the Find My iPhone App or www.icloud.com.

  • Itunes could not connect to iphone because pairing record is missing???

    I have just upgraded to iphone 4s from iphone 4 and when i connect it to my itunes i get the message "itunes could not connect to iphone 'iphone' because pairing record is missing. Any clues what i've missed???
    Also my when i try to backup my iphone 4 to icloud it keeps stopping saying 'incomplete'???

    Try disconnecting your phone from your computer, quit iTunes, connect you phone to your computer again, the re-launch iTunes.

  • What to do? it says"itunes cannot connect to iphone because it is locked with a passcode" but my phone is disabled

    My phone says on the homescreen " iphone diabled connect to itunes" but i cant because i have a passcode on my phone. which i cannot access.

    read here
    http://support.apple.com/kb/HT1212

  • Itunes cannot connect to iphone because of an unknown error (0xE8000065)

    Right after I update iTunes to itune 9. I started update my iphone and it comes up with that message. Does anyone have the same problem?

    Hello,
    I'am not 100% sure about your problem, but a few things are needed to know what happened. One, did you hack or jeilbreak your device? If yes then you pretty much got brickwd. If not, then did you try to put your iPod in DFU mode and then restore? (DFU - Power+Home button for 10 seconds HOLD, and then home for another 10 seconds.) Hope this helps, though I'amnot sure about the cause.
    Best Regards

  • Please Help!!! 'iTunes cannot connect to iphone update software server'

    I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
    Not sure what to try next, have tried setting up new user to no avail.
    I have followed the support guidance and I am not connected through proxy.
    Diagnostics reported as follows:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Inc. Dell DV051
    iTunes 9.2.1.5
    QuickTime 7.6.6
    FairPlay 1.8.20
    Apple Application Support 1.3
    iPod Updater Library 9.2d4
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.1.0.62
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 2.0.2.0 (214.3)
    iTunes Serial Number 098625257EFAC14A
    Current user is an administrator.
    The current local date and time is 2010-07-25 12:16:28.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    Intel(R) 82915G/GV/910GL Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.77
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: No
    DHCP Server: 255.255.255.255
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 192.168.1.1
    192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-07-25 10:25:45.
    ** Device Connectivity Tests **
    iPodService 9.2.1.5 is currently running.

    Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
    1: Make sure your whole iTunes database is backed up.
    2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
    I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
    3: Re-install the correct version of iTunes fresh and try again.

  • Ipad is disabled connect to itunes but i connected it and there was a popup saying itunes cannot connect to ipad because it is locked with a passcode. You mus enter the passcode on the ipad before it can be used with itunes. but i couldnt enter my passwor

    my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????

    Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

    my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • ITunes cannot connect to iPad because it is code blocked.

    iTunes cannot connect to iPad because it is code blocked.

    I have a iPad that is deaktivated - no code. Been advised via support to use iTunes to download and restore updated software. Have made several attempts but no go. iTunes cannot connect to the iPad because it is code blocked.

  • ITunes Cannot connect to iPhone due to unknown error (0xE8000065)

    Hello!
    When I plugin my iphone to a wall, it refuses to charge (it just keeps making a bleeping noise).
    And when I try to connect my iPhone to iTunes, I can't. It just says: iTunes Cannot connect to iPhone due to unknown error (0xE8000065)
    Any suggestions? I replaced the battery hoping that would do the trick, but nada.
    Cheers

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    Did you try a different charger and a different cable? If it won't charge the error will go away soon also when the battery dies.

  • When i plug my iphone 4s into the laptop itunes says itunes cannot conect this iphone because an error ocurred,(error 0xE80000222) what can i do also i havent activate my iphone so i cant do anything with the iphone either

    when i plug my iphone 4s into the laptop itunes says itunes cannot conect this iphone because an error ocurred,(error 0xE80000222) what can i do also i havent activate my iphone so i cant do anything with the iphone either
    HELPPPPPPPP ME PLEASE!!!!!

    iTunes runs on your computer, not your phone. Install the latest version of iTunes on your computer. If you're using a Mac, and running OS X 10.5, you will need to upgrade OS X first.

  • Since yesterday iam facing problem my iphone 5 doesn't get activated, i tried even with i tunes it give me this message : iTunes cannot restore the iphone because Find My iphone is on. please help me

    since yesterday iam facing problem my iphone 5 doesn't get activated, i tried even with i tunes it give me this message : iTunes cannot restore the iphone because Find My iphone is on. please help me

    If you are a developer, go here:
    solution to Activation Lock with expired iOS 7 beta:
    https://devforums.apple.com/message/880712#880712
    (thanks to suzan135 for the link)
    If you are not a developer, your favorite search engine may provide some direction.

  • IPhone Restore + Pairing record missing.. HELP!!!

    I restored my iPhone 4S and when it restarted, I got an error message stating "iTunes could not connect "iphone" because pairing record is missing"... I have restarted my computer numerous times and reinstalled my itunes twice. My iphone is now blank and won't connect... PLEASE HELP

    I had the same problem (pairing record missing) and was finally able to fix it. My host computer is a Windows 7 64-bit setup. I kept reading where others solved the problem by eliminating the Lockdown folder, but I couldn't find that folder in Windows. But it was there in the following location:  C:\ProgramData\Apple\Lockdown. After closing iTunes, I simply renamed the Lockdown folder to Lockdown.old and restarted iTunes. I then plugged in my iPhone USB connection and it worked. (Changing the folder name required Administrator privilige.)

  • ITunes cannot connect w/ iPhone

    I've had my iPhone 3G for 5 months with no issues, now all of a sudden it won't sync with iTunes. When I plug in via USB I get an error message that reads:
    iTunes could not connect to the iPhone " " because an error occurred while reading from the device.
    I've tried restarting my computer, reinstalling iTunes, and I do have success syncing my other iPod.
    Is there something wrong with my iPhone?

    Hi Nathan,
    This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
    If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here: http://docs.info.apple.com/article.html?artnum=305743
    -Jason

  • ITunes cannot connect to iPhone

    when i plug my iphone 4 into my laptop and try to get on itunes it says "iTunes could not connect to iPhone "Brandon's iPhone' because an error occured while reading from this device."   ~~what should i do?

    I figured it out!  I updated my phone to the latest version and my itunes on my coputer to the latest version and it worked perfecty.

Maybe you are looking for

  • "May require ... Raw plug-in version 7.0"

    When I choose "Edit in" going to Photoshop CS5 I get a message saying "This version of Lightroom may require the Photoshop Camera Raw plug-in version 7.0 for full compatibility. Please update the Camera Raw plug-in using the updates tool available in

  • Badi method for knb1-atlkn in customer master in ECC 6.0

    Hi all, in ECC 6.0 .., customer master under company code data under account management  we have field named "Prev. acct no." ( KNB1-ALTKN ) .....I have to do some validations for that field ....can you ppl advise/suggest me the correct badi method f

  • Blank line in Application server file

    Hi, I am uploading datas from 2 internal tables to Application server file(same file). I want a blank like after i finish uploading the first internal table. Need a blank line between two internal table datas. Kindly help me in solving this issue. Re

  • Monitoring Switch Power Usage with SNMP

    Hello everyone,      I have searched high and low, and yet I am still confused as to how to do this...  Is there a uniform MIB that can be interrogated, regardless of the switching platform? Or are there specific MIB's for each switch family..?

  • How to logon to a BW system

    Hello everyone I have installed IDES Enterprise and I tried to connect with Business Explorer>Browser SAp BW 3.x it says that DEV (sys ID)  is not an BW system please conect to a bw system i dont know what i am donig wrog. Is it possible to practice