ITunes cannot establish secure connection with server

Why am I not able to establish secure connection with server?

Hi,
We support IMAP (yahoo/gmail/hotmail), I apologize for the inconvenience.
Best regards,
Michelle

Similar Messages

  • Could not establish secure connection with server

    Hi ,
    We are not able to access our web service URL from Ipad Application on some of the network. We are receiving “could not establish secure connection with the server” message. We are able to access the same URL from other networks. Can you please suggest what can be possible Root cause and their suggested solution?  We would appreciate your quick response..

    hi Alfonso,
    Editing the hosts file is easy. just need to use the CAS/CAM CLI and the vi test editor. You can google for instructions on how to use Vi.
    To start assume we have a CAM and CAS with the hostname cam1 and cas1 respectively. the domain is mycompany.com and the ip addresses for the CAM and CAS is 192.168.10.1 and 192.168.15.2 respectively.
    start with the CAM and view the hosts table
    cat /etc/hosts
    To check what domain u used to setup the CAM
    cat /etc/resolver.conf
    edit the hosts file so appears like so
    192.168.10.1 cam1.mycompany.com cam1
    192.168.15.2 cas1.mycompany.com cas1
    Verify with 'cat /etc/hosts'
    Make sure you can ping 'cas1' and 'cas1.mycompany.com' from cam1
    Next edit the hosts file for cas1 so that it appears like so
    192.168.15.2 cas1.mycompany.com cas1
    192.168.10.1 cam1.mycompany.com cam1
    Make sure you can ping 'cam1' and 'cam1.mycompany.com' from cas1
    HTH
    George

  • Firefox 4.0 cannot establish secure connections with banking sites like bank of america.

    After authentication, the connection is reset and the page fails to load. Or, it takes a very long time to establish the session. Earlier versions of ffx didn't have this problem and IE access these site just fine at the same time when ffx fails.

    I had the exact problem. It seems when connecting from firefox i was getting directed to onlineeast2 and then the connection would reset. When connecting from IE i was getting directed to onlineeast3 and the connection was fine. So I edited my hosts file to force onlineeast2 to resolve to the ip address of onlineeast3. This is working for me. here is what i put in my hosts file:
    171.159.66.159 onlineeast2.bankofamerica.com
    171.159.66.159 onlineeast3.bankofamerica.com
    The hosts file can be found here:
    C:\WINDOWS\system32\drivers\etc\hosts

  • I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    I cannot open my Yahoo Mail but everything else is OK.  When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page.  Safari can not establish secure connection with Yahoo Mail.

    It sounds as though a script on the site, or an advertisement, is not working quite right...
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies using either of these. Save any pending work first.
    While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • Adobeconnect outlook add-ins version 3.5 cannot establish the connection with the server

    i am using outlook 2010 and i have installed the outlook add-ins ver3.5 to my laptop. i was trying to login the server through add-ins with my login details. But it popup"cannot establish the connection to server, please check your server address and account", the server i am using is "intercall-apac.adobeconnect.com". Just want to know is there any port should be opened on the firewall?

    Try putting https:// in the URL for the server instead of http:// (or check the box for a secure connection)

  • MacBook Pro "cannot establish secure connection"

    MacBook Pro "cannot establish secure connection" can't connect to Internet, tried on two separate networks and via wifi and Ethernet. Any suggestions??
    Mac book was connected and working then started giving error message "failed to establish secure connection" now cannot connect to Internet via any network. Either by wifi or Ethernet. However in network settings it says it is connected. iTunes also cannot connect so don't think it is a safari problem. Have also checked networks with other devices and the network itself seems to be working.
    Have further problems with syncing phone (doesn't seem to registering removal of music, storage is not freeing up) but I am hoping that solving Internet connection may solve that problem as well
    Apologies if i am posting in the wrong place!
    Any suggestions greatly appreciated as I am stuck.

    System Preferences > Date & Time
    Enable "Set date & time automatically".
    http://support.apple.com/kb/TA20405

  • Netflix cannot establish secure connection

    Hi,
    I used to be able to access my Netflix account without any issues (I used unblock us).
    Now, it seems that everytime I click on to it, it comes up with netflix cannot establish secure connection.
    I tried Safari and Chrome and the same problem. 
    I've tried to delete my history and reset my cache, but to no avail.
    I'm using Safari Version 7.0.1 and my Mac OS X is Maverick (10.9.1).
    Please help! I'm paying for both Netflix and Unblock via subscription and throwing money down the drain...

    Disable or bypass "Unblock" and test.

  • Safari cannot create secure connection with certain websites

    I have OS X 10.10 with every available updates, and Safari's currently unable to 'establish secure connection' with some site I'm trying to connect, most disturbing being the whole Steam network (store/support.steampowered.com, steamcommunity.com, etc). IE (via Bootcamp), Chrome (both standalone and integrated into Steam client) and Firefox have no problem doing so.
    Considering sometime before the in Steam browser indicated the site as insecure (a red lock icon with a cross, typically used to indicate bad cert) for a short time, and hearing of certs issued to gov agencies for man in the middle, I compared the cert for store.steampowered.com/login (which, in contrary to most content on that domain, forces a secure connection) and this discussions.apple.com. Well Firefox and IE do show a normal grey lock icon without organization name, and Chrome admits the website's ownership is unverified (in details, it says ownership is verified by the CA but there's no public verification record; the secure setting of that site has outdated, too) despite having Valve's name and green lock icon. So the cert could be a fake since it's an ordinary (I guess?) cert from a EV authority (DigiCert High Assurance EV CA-1 in this case). The certificate shown from Chrome is totally fine (not a single red cross in the chain), though.
    Well there're other https resources Safari fails to create a secure connection with every now and then. I just forgot/ am unable to test them with other browsers (Sometimes it's not the page itself that can't be retrieved via https, but some resource it loads. Sadly I only know how to use Inspector in Safari, though I'm sure other browsers have similar functions, too). I suspect Safari just refuses such certificates (or the AES_128_CBC method maybe) while other browsers accept it. Is there an override for this?
    Weird enough, https://ev-root.digicert.com/ has grey lock on Firefox and Safari. Seems overriding is the only workaround.
    As a side note, my Safari freezes upon loading PayPal, being ir-responsive for tens of seconds on every activity such as clicking a link. For most of duration of the freeze no high CPU usage is monitored, though ocspd does sometimes take 50% or so, and the web process bursts into 100% immediately before unfreezing. Guess Yosemite has some issues with TLS on the system level.

    This could be a complicated problem to solve, as there are several possible causes for it.
    Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
    Step 1
    From the menu bar, select
               ▹ System Preferences... ▹ Date & Time
    Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
    Check the box marked 
              Set date and time automatically
    if it's not already checked, and select one of the Apple time servers from the menu next to it.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /System/Library/Keychains/SystemCACertificates.keychain
    Right-click or control-click the highlighted line and select
              Services ▹ Show Info
    from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
    Repeat with this line:
    /System/Library/Keychains/SystemRootCertificates.keychain
    If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
    Step 3
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
    In the Keychains list, there should be items named System and System Roots. If not, select
              File ▹ Add Keychain
    from the menu bar and add the following items:
    /Library/Keychains/System.keychain
    /System/Library/Keychains/SystemRootCertificates.keychain
    Open the View menu in the menu bar. If one of the items in the menu is
              Show Expired Certificates
    select it. Otherwise it will show
              Hide Expired Certificates
    which is what you want.
    From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
              Secure Sockets Layer (SSL)
    select
              no value specified
    Close the inspection window. You'll be prompted for your administrator password to update the settings.
    Now open the same inspection window again, and select
              When using this certificate: Use System Defaults
    Save the change in the same way as before.
    Revert all the certificates with non-default trust settings. Never again change any of those settings.
    Step 4
    Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
    Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
              Help ▹ Keychain Access Help
    from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
    Step 5
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL.
    Step 6
    Triple-click anywhere in the line of text below on this page to select it:
    /var/db/crls
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
    Restart the computer, empty the Trash, and test.
    Step 7
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    fe80::1%lo0                    localhost
    If that's not what you see, post the contents of the window.

  • Cannot establish secure connection to account--trying again

    When I try to get to the itunes store from itunes, I get a message saying that Apple cannot establish a secure connection. It suggests checking to see that my browser has SSL3.0 or TLS 1.0 enabled. I have both of those protocols enabled, and always have had them enabled. I can order from other websites with no problem at all, so they obviously can establish a secure connection with my computer. I have enabled phobos.apple.com on my Windows firewall and deleted McAfee firewall (my subscription was up, anyway). I have reset the files I was told to reset. NOTHING has changed--I still get the same message every time. I can load CD's onto itunes and load the music from my PC to my ipod. Does anyone have any ideas?
    Is it possible to contact an actual person through itunes store support? So far, all I have found is useless files and this discussion forum. Does apple provide software support for the itunes store? Any help is welcome.
    Specs:
    OS = XP Home edition
    emachines, 3.3 Ghz chip, 368 MG ram
    Thank you in advance...
    emachines T3508   Windows XP  

    After a long hassle involving uninstalling and reinstalling both iTunes and QuickTime, I stumbled across the solution--the problem was with my browsers. Not that there was anything wrong with my browsers themselves--I was using Firefox and Mozilla--but it turns out that the iTunes store does not work on these. It works only on internet explorer, as far as I can determine. So, instead of being able to use the browser of my choice, I am stuck with that perennial hacker magnet, IE.
    IMHO, Apple made three major errors. First, they have not optimized their site for browsers that work just fine for other on-line merchants (Amazon, Sierra Trading Post, etc.).
    Second, their message is misleading. Other websites with the same constraint give users a message saying that "We are sorry, but this site is optimized only for Internet Explorer."
    Third, their e-mail response message to people with this problem says to uninstall and reinstall the software. It does not mention switching browsers. Apple, I expected better from a company with your reputation for innovation.
    Windows XP
    Windows XP

  • “CAS Cannot Establish Secure Connection to CAM”

    I have a problem with NAC
    "cas Can not Establish Secure Connection to CAM"
    the error message in the CAS is "Encountered error.unable to connect to manager.javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake"

    Check the current time for CAM and CAS, it must be in 300 segs max interval of different.
    Check the SSL autogenerate certified if you are used it.

  • Cannot establish wireless connection with WRT54G after power-off

    My WRT54G (firmware v7.00.0) is connected to cable TV modem and
    usually the wireless connection works fine, but after swiching off and later
    on the power to WRT54G a laptop cannot establish WiFi connection to internet.
    I can see in Odyssey software (for wireless communication) that my laptop
    found the right network (SSID) but in status it says 'waiting for keys'.
    I use WPA2 (TKIP). The laptop does not connect to internet.
    When I connect it by cable (ethernet) the internet works fine, I have noticed
    that by accessing the web-page utility of the router and simply clicking
    save changes on wireless-settings page (without making any changes in
    the settings) my laptop instantly establishes wireles connection and
    everything works fine till next power swich-off.

    Thanks for reply! I have my network in preffered, and the software/laptop locks on
    the network (see it, says it have excellent signal strenght) and gives note
    'waiting for keys' (the WPA2 encription key is in the settings - both of router and laptop client - Odyssey).
    I've got firmware ver.7 so it is probably the latest.

  • Cannot establish secure connection to itunes store

    Dear Apple:
    If it ain't broke, don't fix it kthx? itunes 8 is unworkable.
    Ok, since I upgraded to version 8, it won't allow me to buy songs. I click the buy now button and absolutely nothing happens. I checked my account, my credit card is authorised, all the info there is up to date. I checked my internet explorer settings, SSL 3.0 and all that jazz is enabled. I run a connectivity test and turns out I cannot establish a secure connection to the itunes store. The program does not deign to tell me why and after about half an hour of looking around to figure out why I give up.
    Here is the log of the test and I am hoping someone will be able to help:
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 8.0.1.11
    QuickTime 7.5.5
    FairPlay 1.0.15
    CD Driver 2.0.7.5
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.1.1.13
    Bonjour 1.0.5.11 (118.5)
    iTunes Serial Number 4A9********A97
    Current user is an administrator.
    The current local date and time is 2008-10-23 04:40:26.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA GeForce 7600 GT
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {701A3731-81F0-400D-9AFA-0E5814B83909}
    Description: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
    IP Address: 192.168.1.100
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Thu Oct 23 04:45:44 2008
    Lease Expires: Fri Oct 24 04:45:44 2008
    DNS Servers: 192.168.0.1
    192.168.0.1
    205.171.3.26
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was unsuccessful.
    The network connection timed out.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2008-10-23 05:19:36.
    <Edited by Moderator>

    I tried your suggestions but no luck. I was looking through the tabs on IE and saw a Diagnose connection problems application. I ran it and it seems that I also have trouble connecting to other HTTPS servers (see below). Now this is odd since I do my banking from home, access hotmail, yahoo mail, gmail, netflix etc and I know all of them use HTTPS, so why would I be able to access some HTTPS servers and not others.
    /sadpanda.
    Last diagnostic run time: 10/23/08 09:01:59 Network Adapter Diagnostic
    Network location detection
    info Using home Internet connection
    Network adapter identification
    info Network connection: Name=Local Area Connection 2, Device=Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller, MediaType=LAN, SubMediaType=LAN
    info Network connection: Name=1394 Connection, Device=1394 Net Adapter, MediaType=LAN, SubMediaType=1394
    info Network connection: Name=Local Area Connection, Device=NVIDIA nForce Networking Controller, MediaType=LAN, SubMediaType=LAN
    info Network connection: Name=Internet Connection, Device=Internet Connection, MediaType=SHARED ACCESS HOST LAN, SubMediaType=NONE
    warn This machine has more than one Ethernet or more than one Wireless adapter
    info Redirecting user to support call
    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity
    info HTTP: Successfully connected to www.microsoft.com.
    info FTP (Passive): Successfully connected to ftp.microsoft.com.
    warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out
    warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out
    error Could not make an HTTPS connection.

  • Safari cannot establish secure connection to the server

    I cannot establish a secure connection to the server using a CAC card. Any ideas?

    Have you made sure your software is completely up to date?
    You should be at one of the following:
    10.6.8
    10.7.5
    10.8.5
    10.9.4
    And let us know if it works!

  • Cannot establish secure connection to Apple Store

    I've tried all the solutions I can find to no avail, but cannot seem to establish a secure connection to the iTunes store.  No error code just a blank iTunes Store screen and a never ending attempting connection.  Some of what I've tried:
    * Date and time correct
    * SSL and TSL checked
    * No proxy and tried to check and uncheck auto detect settings
    * Used Autoruns to be sure no other LSP providers
    * Ensured Windows Firewall has iTunes fully allowed (even reset Firewall to default and then reallowed it again)
    * Removed and/or disabled all security software to test for possible blocking
    * Reset Winsock and rebooted
    * I CAN reach secure sites in my browser just not in iTunes
    * Removed iTunes, Quicktime and any other Apple related items I could find with RevoUninstaller to look for leftover entries, rebooted and reinstalled (several times)
    * Cleaned all cookies, caches and old registry entries
    * Machine is free of all malware
    This only happens on one computer so I know it's not my account.  It happened out of the blue (well, I'm sure it was related to something...a Windows update, an update of something....but I didn't associate it at the time so I do not know what).  I know another person who had the exact same symptoms out of nowhere and has very different software from me (and a totally unrelated account to mine) so I suspect a Windows Update but I don't know which one.
    Specs:  Windows 7 64-bit  iTunes 10.6.3   AV is Microsoft Security Essentials with realtime Malwarebytes
    When I open iTunes it takes a very long time to load, system becomes sluggish, and then when it finally does load, it simply will not connect to the store and it will not recognize any iPhone or iPad I try to sync.  When I run the diagnostic the only information it seems to contain that is pertinent is that I can't establish the secure connections. In Safe mode iTunes will start more quickly but since I cannot start Apple service in safe mode I cannot connect to the iTunes store that way.  (I have however, disabled all but the most essential startup items and the long load in normal boot still remains).
    I'm at a loss. I've Googled and searched the forums here and tried every plausible thing I could find but nothing seems to work.  Any further ideas are welcomed.  I was going to try an older install of iTunes but older versions won't read a library created in a newer version. I would really like to sync some new items to my devices and since the computer won't sync to the cloud as it can't log in - I'm kinda stuck at the moment.  It's really frustrating. I'll be glad to post diag logs if anyone things it will really help.
    Many thanks for any additional ideas!

    I finally went into my services and looked at every service that wasn't set to start automatically and read the description.  If it sounded like it could be enabled safely (obviously that was a decision I had to make for myself and the security of my machine) I enabled it and set it to start automatically. Anything with regards to peer to peer, internet related, and homesharing was certainly something I considered.  There was also a service called IKE that was stopped for some reason that was recommended never to be stopped.  I personally enabled over 35 different services.  Somewhere in there (and I have no idea which service or combination of services) it fixed my problem.  The interesting part was that I never went in and stopped any of these services or changed the status on my own, so I have no idea where they got changed - and nowhere in any of the reinstalled did Apple products set the services back to what they needed them to be.  Go figure.
    As an aside - Bonjour was enabled AND running but iTunes kept telling me it wasn't.  That is what started my search in the services to start with.  I did try iTunes support but they were less than helpful and directed me back to all the same tech bulletins or to call for paid support - which I wasn't about to do for a free program that just stopped working.
    iTunes is now opening like a charm and is connecting perfectly for me.  Obviously, this is something you'd want to do with caution and I'd suggest that before you blanket go and do as many as I did that you might want to carefully select the ones that you look at setting.  My first reboot took a bit but after that things have been running smoothly.  Your mileage may vary and take this with caution.  You may want to enable a few at a time and test instead of doing what I did.

  • Sarfi cannot establish secure connection to Apple website?

    Im setting up a brand new iPad 3 that I bought for my father for his birthday.  I set up a new Apple ID account and when trying to download an app I get redirected to a website for more verification. But once I get redirected a window stating "Cannot open page: safari cannot establish a secure connection" pops up and i cant move on nor does it give troubleshooting prompts.  I can access other websites no problem. I have restsarted safari. Restarted the iPad. Deleted cookies. Nothing is working. I would be surprised to learn it was a website problem being that it's an Apple website and I'm trying to access it on the newest Apple product.  I've been reading the discussion boards and nothing has been working. Please help!

    I finally went into my services and looked at every service that wasn't set to start automatically and read the description.  If it sounded like it could be enabled safely (obviously that was a decision I had to make for myself and the security of my machine) I enabled it and set it to start automatically. Anything with regards to peer to peer, internet related, and homesharing was certainly something I considered.  There was also a service called IKE that was stopped for some reason that was recommended never to be stopped.  I personally enabled over 35 different services.  Somewhere in there (and I have no idea which service or combination of services) it fixed my problem.  The interesting part was that I never went in and stopped any of these services or changed the status on my own, so I have no idea where they got changed - and nowhere in any of the reinstalled did Apple products set the services back to what they needed them to be.  Go figure.
    As an aside - Bonjour was enabled AND running but iTunes kept telling me it wasn't.  That is what started my search in the services to start with.  I did try iTunes support but they were less than helpful and directed me back to all the same tech bulletins or to call for paid support - which I wasn't about to do for a free program that just stopped working.
    iTunes is now opening like a charm and is connecting perfectly for me.  Obviously, this is something you'd want to do with caution and I'd suggest that before you blanket go and do as many as I did that you might want to carefully select the ones that you look at setting.  My first reboot took a bit but after that things have been running smoothly.  Your mileage may vary and take this with caution.  You may want to enable a few at a time and test instead of doing what I did.

Maybe you are looking for

  • Using Acrobat 5.0

    I have a copy of Acrobat 5.0. I assume that it is no longer supported, so might well have security problems. It doesn't seem to entitle me to the Acrobat 9.0 upgrade price, and I cannot justify paying the price of Acrobat 9.0 (in fact paying the upgr

  • Multiple tables In JDBC ADapter

    Hi All,          Can we access more than 1 table in one JDBC adapter? If yes how? XIer

  • Data logger and online processing application

    Dear All My application should include both data logging and online processing threads which are synchronized. I already implemented that by means of something we call "Ring buffer" which is an array containing the data and when the data stream reach

  • Retouch button wont work

    i click on the retouch button but when i move it over the writing i want to erase, nothing happens

  • Why can't I speak to a member of staff in this company?

    I am a current Elements user and considering moving on to Lightroom. Can I get any way of asking someone in this company some questions about it without going through a forum? Every time I try to get a contact number or e-mail address I am told I mus