Itunes cannot find airplay devices

Hi,
my iTunes on my Desktop (Win7 64bit) is not showing the AirPlay icon anymore. Sometimes it shows up but most of the time it doesn't.
in my network there are two airplay devices, both show up all the time on my iphones/ipads.
Also a second computer seems to work fine and shows the airplay icon as expected.
another issue:
when opening itunes on the desktop I cannot use REMOTE on the iOS-devices to connect to it. (unless I hit one of the rare cases it shows the AirPlay-icon)
I tried rebooting/Antivirus/internet setting (I can connect to AppleStore all the time) and the windows firewall should be the same as on the laptop that works just fine...
Any idea?

now also tested with completely disabled WindowsFirewall... same effect, no AirPlay, no working Remote...

Similar Messages

  • Itunes cannot find my device after update, cannot restore my iphone

    PLEASE HELP, I HAVE TRIED TO UPDATE MY PHONE, HAVE LOST EVERYTHING AND NEED TO RESTORE. iTUNES NOT RECOGNIZING DEVICE.

    try to restore in DFU mode..connect your device and press turn on/off button and home button your device will get restart and after sometime it gets totally blank that means it is in DFU mode..now your device will get detected my itunes..

  • HT4623 my iphone is stuck resetting its self. its been doing it all day. and my computer and itunes cannot find my device when i try and connect to a computer

    someone please help me fix my phone

    I've not seen this type of behavior, but see if this support document helps. http://support.apple.com/kb/HT1664

  • Itunes cannot find any of my devices when connected

    itunes cannot find my devices when i connect to my pc

    Hi sirlightning,
    If you are having issues with your devices not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • HT1414 I have an iPod touch and it says iPod Is disabled connect to iTunes, but it's green across the too instead of red. When I connected to iTunes a message appeared and said iTunes cannot find device must have a pass code to register to iTunes. What ca

    MY iPod touch says iPod I'd disabled, connect to iTunes, but it is green at the top instead of red. It won't allow me to slide bar to open screen or nothing. I tried to connect to iTunes and a message appears and says iTunes cannot find my device must have pass code to continue. But I can't do anything on the iPod at all. What can I do to fix this?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • It's nice that usb tethering has returned, but how do I get iTunes to find wifi devices?

    Since the last update this May, my iTunes cannot find wifi devices. USB works but devices no longer show up via wifi.

    Hello Falcon27,
    Thanks for using Apple Support Communities.
    The following support article has troubleshooting steps for you to go through:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/TS4062
    Take care,
    Alex H.

  • Hi i cannot find my devices on itunes,please help

    hi can you help.i cannot find my devices when itunes starts up although they are listed in my details

    Hi HERBMAN28,
    If you are having issues with your devices not being recognized by iTunes, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Regards,
    - Brenden

  • ITunes cannot find Aiport Express via D-link

    iTunes cannot find Aiport Express.
    iMac and Airport Express both connected to D-link wireless router (DI-524UP). Can see Airport Express on iMac Airport Utilities, and can communicate (do changes) via the D-link network. iMac working fine with D-link for internett access also.Have set up Aiport Express to serve as extra speakers in iTunes. Airport Express connected to stereo with cable. Can choose the external speakers in iTunes. Think this means iTunes also must be communicating with Airport Express, because If I change the name of the externals speakers in Airport Express, it also changes in iTunes after clicking "update" and the Airport Express re-starts. However after choosing the external speakers in iTunes and starting a song iTunes is seeking the speakers (Airport Express) without finding it. All devices are connected to the same D-link network.
    Working fine when I set up Airport Express with its own network and connecting it with iMac. Also I could connect my iPhone to my iTunes library (remote app.) This is not working in the d-Link network either.
    It's a drag to have to change both the PC and the iPhone to another network every time I want to play musik on the stereo. This is why I am trying to get everything to work together in the same network (D-Link).
    Somebody having met this problem before?

    Correction: Downloaded an update for the D-Link, and now the iPhone is working with iMac for remote control of iTunes.
    Still iTunes cannot find Airport Express when choosing external speekers

  • HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

    I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

    Hello jlb1977,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Best of luck,
    Mario

  • HT201302 Cannot find my device

    When I open "my computer" it does not show my device, but I can see it in iTunes.  It shows it's connected and I can access it in iTunes, but cannot find the device anywhere else.  What can I do?  How can I find my device so I can get pictures off of it?

    Have you tried resetting your phone then plugging it in?

  • TS3988 i cannot find my device when i go to find my iphone

    cannot find my device when i go to find my iphone on my mac

    it sounds like you need to sync your iphone with itunes bob. can you explain how the 3 store in warrington,comes into syncing your phone?

  • My iphone 5c wont work after update from ios 7 to ios 8, is on recovery mode but my itunes wont find my device to restore it

    I update my iphone 5c ios 7.1.2 (i think) to ios 8.0.2, however when it was intalling it suddently stppoed and my iphone only displayed the itunes icon with the cable plug in in the screen. I searched all over the internet for the solution and it says to turn the device into recovery mode and plug it to itunes so it can restore with ios 8 on it, however my itunes doesnt find my device in any way, i tried updating my itunes my windows everything, but still doesnt work, help please!!

    If  your phone is in recovery mode, all data on it are gone.  Certainly before performing a software update, you backed up your data and imported your important photos onto your computer, right?

  • I factory restored my iphone and now it is stuck in repair mode. i cannot connect to itunes to restore as i get error "itunes cannot find disk"

    i restored my iphone4 to factory settings because it was running slow and some apps werent working. My phone is now stuck in repair mode and is continually rebooting itself. I know the usual solution would be to restore via itunes but itunes will not allow me to do anything as i get the error "itunes cannot find disk"

    Place your phone in DFU mode (search Google) and restore

  • ITunes cannot find songs in library

    For some reason, my iTunes cannot find songs in my iTunes library that are there. It says the file cannot be located, and I have to go one by one and individually find the files for iTunes. I checked in my preferences and I made sure that it is actually looking in the folder where all my songs are. Any idea why this happened? Is there any way to find all of the songs at once instead of doing them individually? (I have about 800 songs, so that could take a while).

    One way you might be able to speed things up ( re-add to itunes) is to find songs where Itunes does know about from the same Artist and then right click on song and select reveal in explorer. This will give you the path to folder of similar songs. You then go to folder and select the songs you want re-added to itunes. While it plays it gets re-added. YOu can play a few seconds of the song and then go to next one that needs to be added.

  • Renameing files - iTunes cannot find files?

    I recently got a new computer and forgot to send all of the music on my old one to this one - so i imported them from my iPod. When it imported them, it gave them file names such as "APKF" and "NXVX", so if i delete and file and then want it back - i have to go through all of the files until i find the one i'm looking for. A simple solution to this would be to rename the files with their correct artist name and song,... but when i do this iTunes cannot find the files when i go to play the songs ... it also does this if i simply just move a song from one folder to another ... help?
    Thank you!!!

    I'm gonna keep them as their original four letter name and then just create a key in Notepad were it links the artist to the song by that four letter name. And them inport them one by one and enter their keys into a notepad...
    It'll take a long time, but after i do it this one time i can just add and delete songs from the notepad.
    like this:
    Cage the Elephant:
    Back Against the Wall: WTHK
    Ain't no rest for the wicked: TYRE
    thank you soooo much for your help, but i'm a neat freak so i'm gonna do this. you don't know of somekind of software were you can save some kind of data? like a non-trial version of Windows Office Excel?

Maybe you are looking for

  • EJB 3.0 PostConstruct and SessionContext -Oracle EJB 3.0 spec violatiation?

    I am writing a stateless session bean using EJB 3.0 and the PostConstruct annotation. Within the PostConstruct annotated method my bean accesses the SessionContext to get the Timer Service. WebLogic 10.3.3 is throwing the following error: com.oracle.

  • Error when starting NodeManager .. pls help

    When attempting to start node manager i recieve the following error: <Sep 30, 2004 1:30:47 PM EDT> <Error> <NodeManager> <Node manager could not find the required library, libNodeManager.so, in path - /usr/j2se/jre/lib/i386/client:/usr/j2se/jre/lib/i

  • UIComponent broadCastAction is not working in mobile page

    We are using the broadCastAction in one of our critical flows to submit to an action in Managed bean but we are facing issue in our ADF fusion web app for mobile . When we create a page with mobile render option selected the broadCastAction is not ge

  • How do i sort images in iphoto on Ipad

    How do i sort images in iphoto on Ipad

  • How to use additional parameters in SM49

    Hi, I wrote a CMD file witch copies a file from one directory to another, the source and destention are both parameteres, how do I sent the 2 parameters using SM49? the command file looks like this: copy %1% %2% The system is windows Thanks, Naama.