Itunes cannot find entry point object

Hello, please help before I go insane
I have a brand new Dell laptop and an iPhone 5c with a USB cable that has seen better days. It still charges, but not very consistently through a laptop and often comes up with 'the device you have plugged in has malfunctioned' or 'unknown device' but will occasionally work. I also have an iPad 2 which works absolutely fine.
I have iTunes installed, the latest version, it was a struggle getting it to work without it just crashing initially, but after about 40 uninstalls, delete, redownload, reinstall etc I finally managed to get it to work. I plugged my phone in and got the message 'the procedure entry point _objc_load_image could not be located in the dynamic link library objc.dll.' and iTunes wouldn't recognise my iPhone although my laptop did. The message wouldn't go away so I downloaded the latest iTunes again, uninstalled and deleted using the wizard and then downloaded again. I did try using the 'repair' option, however it told me that 'the feature you are trying to use is on a network resource that is unavailable. Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below' (I have no idea where to find iTunes manually).
Anyway, after doing this 7 times after connecting my phone or my iPad into the computer and the same '_objc_load_image_' error coming up each time, and me then having the reinstall iTunes, I still cannot get it to read my phone or iPad.
Someone help, I only have a laptop for 7 more days...
P.S. I have tried searching the computer for .dll files but there is never any
Thanks in advance

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun

I am getting the error "itunes the procedure entry point ?videotracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0a@VCrashonover flow@2@@***@@xz could not be located in the dynamic link Library C:\Program files (86x)\Common Files\Apple\...help?

I am gettting the error message:
itunes the procedure entry point ?videotracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0a@VCrashonoverf low@2@@***@@xz could not be located in the dynamic link Library C:\Program files (86x)\Common Files\Apple\Apple Application Support\Webkit.dll.
After I get this error iTunes will not open, and does not respond
I have't been able to find any info on this can anyone help?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99827)

FYI: How to Fix "iTunes Cannot Find Original File" Error

Yesterday morning, I opened iTunes and tried to play a file. I got the old "iTunes cannot find the original file" error. I tried another file. Same thing. I tried restarting iTunes, holding down the shift key, and making sure iTunes knew where my Library file was. Yep. Still no dice. So I came here, and did a search for help. I could not find any definitive answers to this question. So I did a Google search and found the fix in an old Metafilter thread. Given that this problem seems a little common, I thought I'd post my solution here, for anyone who has this issue in the future.
First things first, make sure that it's not just an issue of pointing iTunes to your current library location. Go to your advanced preferences and double-check the library location path. If this doesn't fix it, then it's time to go my route:
1) Open your iTunes folder in windows explorer. Look for a file called "itunes library.xml". Copy that file to your desktop or somewhere else so that it's backed up...in case something goes wrong.
2) Open the original XML file in notepad (right-click, "open with", "notepad").
3) In this XML file, you will see a paragraph of information for every file you have (songs, podcasts, videos, etc.). In each of those paragraphs, there is a file path specifying where the file is supposed to reside. This is how the itunes library.itl file knows where to look. In my case, it should have been "e:/my music/itunes", but instead, it was "e:/my music/itunes/itunes music". The program had created that folder for some reason, and all my files were pointing there.
4) Check a few of the paragraphs and see if they are pointing to your actual music folder. If so, then you have another problem...sorry. If not, then continue on:
5) Go to edit->replace (or control-H). In the "find what" box, enter the incorrect file path (in my case, e:/my music/itunes/itunes music"). In the "replace with" box, enter the correct path of your itunes music folder (in my case, "e:/my music/itunes". Then click "replace all".
If you have a lot of songs, this may take awhile. I have over 25,000 files, so it took at least 18 hours.
6) When it's done, quit notepad and save the XML file. Open iTunes. If it doesn't automatically start updating your library, then try to play a song. If you get the same old error, then quite iTunes, then re-open it, go to the advanced preferences and select the correct file path for the library location. This should fix it.

I am also finding many "ghost file" duplicate files (with the exclamation point "can not locate files" message), after pointing Itunes version 8.2.1.6 to my music folder on a separate, networked hard drive. My understanding is that the "Consolidate Files" feature in Itunes is supposed to properly identify all of the file locations, but it only worked for about 1/5 of our 10,000 plus files before it stopped running. (I've read in other forums that this software is buggy, and gets confused with long song titles, etc.)It also leaves you with duplicate "ghost" files to delete, when the music from the separate drive is "added".
I can not find a file called ituneslibrary.xml to try your suggestion, when I open my Itunes folder. When I do "get info" on the individual music files in Itunes that can't be located, the "where" field = "not available". I have doublechecked the library location in preferences and it is properly pointed to "K:\itunes" which is the correct location.

ITunes cannot find but I can ( ! ) - how do I fix this?

I recently upgraded to a larger capacity drive and copied my library to the new drive but also kept a backup on the old drive. Now on the new drive, I have a ton of those exclamation points and iTunes cannot find a lot of the songs. It is making me find them one song at a time. How can I keep my new drive as the location where iTunes is stored (using the Advanced section of preferences for iTunes music folder location) but get iTunes to fix these that it cannot locate? And if I can locate them one at a time just by going back to the backup, why can't iTunes figure that out on its own? I'm not even sure why this happened, since I did the Consolidate and Keep iTunes folder organized functions when transferring to the new drive. Please help!

Hi - the original files were copied to the new drive and unfortunately, were deleted from the old drive. But what I do have on the old drive, and iTunes seems to be able to use it when it wants me to locate the songs one by one, is a backup copy of my library I made before the move to the new drive.
Since moving, I set the new drive location as where the iTunes folder is stored, and the song information is all in the library on the new drive, but it confuses me why that info is there but the "sound" isn't. The files that are affected seem to be mostly the first files I loaded on when I got iTunes in December. A lot came from Windows media. I wish I could understand why if it has me "locate" it, it can then fix the problem (although that has to be done song-by-song) but yet it cannot seem to link to the entire folder and I have to do this one song at a time. Would it be possible to put that backup folder on a CD, and create CD backups of my functioning library on the new drive, and then reinstall iTunes on the new drive using the multiple CDs? Would it let me use CD backups created in two different backups, and extract what each backup had to thus make my library complete again (between the two backups, that would be my entire library.)

I factory restored my iphone and now it is stuck in repair mode. i cannot connect to itunes to restore as i get error "itunes cannot find disk"

i restored my iphone4 to factory settings because it was running slow and some apps werent working. My phone is now stuck in repair mode and is continually rebooting itself. I know the usual solution would be to restore via itunes but itunes will not allow me to do anything as i get the error "itunes cannot find disk"

Place your phone in DFU mode (search Google) and restore

Itunes cannot find any of my devices when connected

itunes cannot find my devices when i connect to my pc

Hi sirlightning,
If you are having issues with your devices not being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden

Installed Itunes 10.5. I try to open Itunes is says Entry point not found.

I just installed Itunes 10.5 and restarted the computer. Now when I try to open Itunes is says Entry point not found. The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundation.dll. I have tried to reinstall and repair Itunes 3 times and I still get the same prompt when I try to open up Itunes. Can anyone help me fix this please?
Thank you in advance.

I hope this is of some help to you as I found it when trying to solve my own problems with 10.5
"Taken at face value, you've got a damaged Apple Application Support program file, balda. (iTunes needs a properly functioning Apple Application Support in order to work correctly.
On a 32-bit Windows 7 system, I'd try the following set of instructions:"
http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253

Oracle Access Manager Configuration : Cannot find the Person Object Class

Hi,
I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
1) I have installed OID. I am using one OID for both config and user data.
2) I have installed Identity server and have modified the OID schema automically during installation.
3) I have installed web pass.
I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
Here i gone to Identity System Console to configure Identity server.
Following are the config data i have given
Configuration DN : dc=mydomain,dc=com
Search Base : dc=mydomain,dc=com
Host : mypc.mydomain.com
Port Number : 389
Root DN : cn=orcladmin
Root Password : *******
Directory Server Security Mode : Open
Is the Configuration data stored in this directory also : Yes
Person Object Class : inetorgperson
Auto configure objectclass : yes
Group Object Class : groupOfUniqueNames
Auto configure objectclass : yes
After this I have clicked on the restart server button.
It comes back to the page asking to enter Person Object class details.
I Get the Error : Cannot find the Person Object Class.
I have checked the object class in OID it is there, I have verified the connection details are also correct.
Any Ideas what might be wrong.
Earlier during setup i had to modify the OID schema, how do i check if this has been done.
Any Ideas

<?xml version="1.0" encoding="utf-8"?>
<ValNameList
xmlns="http://www.oblix.com"
ListName="setup.xml">
<NameValPair
ParamName="mainOIS"
Value="true"></NameValPair>
<NameValPair
ParamName="currentStep"
Value="LDAP_CONFIG_CHANGES"></NameValPair>
<NameValPair
ParamName="status"
Value="incomplete"></NameValPair>
<NameValPair
ParamName="whichDB"
Value="OID"></NameValPair>
<NameValPair
ParamName="dataDirCopied"
Value="TRUE"></NameValPair>
<NameValPair
ParamName="machineNo"
Value="localhost"></NameValPair>
<NameValPair
ParamName="portNo"
Value="389"></NameValPair>
<NameValPair
ParamName="rootDN"
Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="ldapRootPasswd"
Value="**************"></NameValPair>
<NameValPair
ParamName="securityMode"
Value="Open"></NameValPair>
<NameValPair
ParamName="oblixUserDataSame"
Value="Yes"></NameValPair>
<NameValPair
ParamName="searchBase"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="configDN"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="obClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="defaultConfigForPersonOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obClassGroup"
Value="groupOfUniqueNames"></NameValPair>
<NameValPair
ParamName="defaultConfigForGroupOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obOldClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="obOldClassGroup"
Value="groupOfUniqueNames"></NameValPair>
</ValNameList>

ITunes cannot find songs in library

For some reason, my iTunes cannot find songs in my iTunes library that are there. It says the file cannot be located, and I have to go one by one and individually find the files for iTunes. I checked in my preferences and I made sure that it is actually looking in the folder where all my songs are. Any idea why this happened? Is there any way to find all of the songs at once instead of doing them individually? (I have about 800 songs, so that could take a while).

One way you might be able to speed things up ( re-add to itunes) is to find songs where Itunes does know about from the same Artist and then right click on song and select reveal in explorer. This will give you the path to folder of similar songs. You then go to folder and select the songs you want re-added to itunes. While it plays it gets re-added. YOu can play a few seconds of the song and then go to next one that needs to be added.

HT1414 I have an iPod touch and it says iPod Is disabled connect to iTunes, but it's green across the too instead of red. When I connected to iTunes a message appeared and said iTunes cannot find device must have a pass code to register to iTunes. What ca

MY iPod touch says iPod I'd disabled, connect to iTunes, but it is green at the top instead of red. It won't allow me to slide bar to open screen or nothing. I tried to connect to iTunes and a message appears and says iTunes cannot find my device must have pass code to continue. But I can't do anything on the iPod at all. What can I do to fix this?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Renameing files - iTunes cannot find files?

I recently got a new computer and forgot to send all of the music on my old one to this one - so i imported them from my iPod. When it imported them, it gave them file names such as "APKF" and "NXVX", so if i delete and file and then want it back - i have to go through all of the files until i find the one i'm looking for. A simple solution to this would be to rename the files with their correct artist name and song,... but when i do this iTunes cannot find the files when i go to play the songs ... it also does this if i simply just move a song from one folder to another ... help?
Thank you!!!

I'm gonna keep them as their original four letter name and then just create a key in Notepad were it links the artist to the song by that four letter name. And them inport them one by one and enter their keys into a notepad...
It'll take a long time, but after i do it this one time i can just add and delete songs from the notepad.
like this:
Cage the Elephant:
Back Against the Wall: WTHK
Ain't no rest for the wicked: TYRE
thank you soooo much for your help, but i'm a neat freak so i'm gonna do this. you don't know of somekind of software were you can save some kind of data? like a non-trial version of Windows Office Excel?

ITunes Helper.exe - Entry point not found error after upgrade

I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

Hmmm. Roy B has some advice on that one in the following post:
http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

What to do on the message " AppleSyncNotifier.exe – Cannot find starting point of [sqlite3_wal_checkpoint] from DLL SQLite3.dll

컴퓨터를 부팅하면 다음 메시지가 나오네요 " AppleSyncNotifier.exe – 시작시점 sqlite3_wal_checkpoint을(를) DLL SQLite3.dll에서 찾을 수 없습니다."
Upon booting, I see the message " AppleSyncNotifier.exe – Cannot find starting point of [sqlite3_wal_checkpoint] from DLL SQLite3.dll

With that one, I'd first try uninstalling and reinstalling your MobileMe Control Panel for Windows. Does that clear up the error?

ITunes cannot find Aiport Express via D-link

iTunes cannot find Aiport Express.
iMac and Airport Express both connected to D-link wireless router (DI-524UP). Can see Airport Express on iMac Airport Utilities, and can communicate (do changes) via the D-link network. iMac working fine with D-link for internett access also.Have set up Aiport Express to serve as extra speakers in iTunes. Airport Express connected to stereo with cable. Can choose the external speakers in iTunes. Think this means iTunes also must be communicating with Airport Express, because If I change the name of the externals speakers in Airport Express, it also changes in iTunes after clicking "update" and the Airport Express re-starts. However after choosing the external speakers in iTunes and starting a song iTunes is seeking the speakers (Airport Express) without finding it. All devices are connected to the same D-link network.
Working fine when I set up Airport Express with its own network and connecting it with iMac. Also I could connect my iPhone to my iTunes library (remote app.) This is not working in the d-Link network either.
It's a drag to have to change both the PC and the iPhone to another network every time I want to play musik on the stereo. This is why I am trying to get everything to work together in the same network (D-Link).
Somebody having met this problem before?

Correction: Downloaded an update for the D-Link, and now the iPhone is working with iMac for remote control of iTunes.
Still iTunes cannot find Airport Express when choosing external speekers

Itunes cannot find entry point object

Similar Messages

Maybe you are looking for