ITunes cannot find find on NAS and marks them with "!" - Only double-click helps
I have placed my iTunes library on my Synology NAS. After I (hopefully) got rif of my connection problems by switcvhing from afp to a nfs connection there is still another probem: iTunes does not "find" the songs on the NAS after have started it and marks them with the "!" sign on the left side of the name. If I double click on the song, that one is now properly found and play... This is somewhat "not useable", but it works when I am sitting in front of my Mac....
BUT:
When I connect to my iTunes library from my AppleTv or my iPad when I want to stream some music to the AppleTV, only those songs are available that I doubleclick some time before - when they are marked with that "!". This behavior of course is not "usable" at all.
MY QUESTION:
Is there some way to force iTunes to scan the libray and find those songe marked with "!". I know that sometimes iTunes asks for finding some of the not located songs but even then not all of the "!" are gone. That only happens when I double click it manually or show iTunes the song in the "find" dialog that pops up if it really cannot find the songs.
Thanks for any support!!
No one there with some idea how to trigger the re-scan of the library to remove those "!" symbols (and make iTunes working properly again) ???
Similar Messages
-
Since Update ITUnes cannot auto find my 14,000+ songs on disc
None of my songs in my library play. I get a warning that it cannot locate the file. In preferences, It shows the correct external disc the files are located at. If I individually search for the file on the disc/folder on that external disc I find it and it plays and ITunes finds it again afterwards. I have purchased over 14 thousand songs from ITunes that I have in there and categorized them in many types of individual folders. I cannot see looking for all of them individually and re-organizing them back into those various folders, which would easily take over six months of work. WHAT THE HECK is an answer her.
Just guessing, of course, but the last time I made an update resulting from a prompt from ITunes to do so, the external drive where my ITunes music folder is located was not on. I do this because I've had too many breakdown of external drives over the years with nightmares re-constructing files. These external drives seem to have a limited life to them. Maybe that is the reason it cannot now find the files. There was NO warning in the update prompt regarding this issue before I did the update.
Would appreciate any help I can get here from those with much more experience than I.
Respectfully submitted
Edward D Fogell
773-735-6400
[email protected]this script might help:
_*iTunes Track CPR v1.3*_
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."
JGG -
my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????
Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
I can't access my itunes music on my laptop after having it re-imaged. I installed itunes again but can't access the music folder. I get the following message when I click to open itunes: "The folder itunes cannot be found or created, and is required. The default location for this folder is the Music folder.
I have an iPad2, and iPad mini, and an iPhone5 with a different number of songs on each. I want to sync everything -- should have close to 800 songs. Tried to get support from Apple but would be charged for help.I have a Windows 7 operating system my computer runs from.
-
The folder "iTunes" cannot be found or created, and is required.
Hello,
I cannot start iTunes. When I do, I get the following error message:
The folder "iTunes" cannot be found or created, and is required. the default location for this folder is inside the "My Music" folder.
I have reviewed and gone through the recommendations for this problem, including downloading the WindowsPowerToys Tweak UI. The problem is that the Tweak UI does not know that there is a My Music special folder, so Tweak UI was of no use.
Can someone tell me what I need to do to make my Dell (Dell doesn't know either) understand that I have "My Music" folder on my computer....so it can be seen in my Tweak UI application.
Thank you.
TimI have followed these instructions:
If the My Music folder is in the wrong location or incorrectly assigned in the Windows registry, you may see one of the following error messages:
* "The folder iTunes is on a locked disk or you do not have write permissions for this folder."
* "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder."
If you see one of the above errors, follow these steps to troubleshoot this:
1. Verify the location of your Windows XP My Music folder. The default location for this folder is
C:\Documents and Settings\username\My Documents\My Music
If you do not have this folder at the default location and have not moved it to another location, consider creating one inside your My Documents folder.
2. Download and install Tweak UI from the Microsoft PowerToys website at http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx Note: This utility is for Windows XP only. Please review the system requirements before installing.
3. Once you have installed Tweak UI, open it from the Start menu.
4. In the column on the left, click on the plus symbol next to My Computer and select Special Folders.
5. In the right pane on the Folderlist, click My Music.
* This is where I run into the problem. My Music does not show up in the *
* right pane pull down set of options. *
6. Click the Change Location button. You may see a warning message appear with precautions for changing this setting; after reviewing the message, click Yes.
7. In the resulting window, browse for the My Music folder as described in step 1, and click OK.
8. Reinstall or open iTunes. -
Error message The folder Itunes cannot be found or created and is required"
Help please. I get the message "The folder Itunes cannot be found or created and is required. The default location for this folder is inside the My Music folder". As a result, I cannot get Itunes to load. Have uninstalled and reloaded, repaired etc, all not working as still end up getting same message. Have also made an ITunes folder in My music, all to no avail. No viruses and virus library totally up to date. Getting to stage where I want to throw Ipod in bin and get an Iriver as its driving me insane!!
Here is a copy of the ilounge entries. I got one of my more IT literate guys to do this - but it looked easy when he did it!! important thing is it all came back - was a problem as I had moved an external hard drive so one of the locations detailed below showed the old address.
Good luck!!
Click on Start
Clin on Run
Type in "regedit" Enter
Do this step twice as there are two locations.
CTRL F
Type in "My Music"
Double Click and enter the path for where the folder is located.
The exact locations of the 2 entries that I changed are
hkeycurrentuser - software - microsoft - windows - current version - explorer - shell folders
and
as above - windows - current version - explorer - USER shell folders
Try changing the two items from there - if these have already been changed then I'm not sure what to suggest. -
My itunes keep saying The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “Music” folder.iTunes needs a library to continue. You may choose an existing iTunes library or create a new one. please help i presschooseexisting cuase i have one but then it says this The file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. please help
I was cleaning my macbook pro and i deleted all my files including itunes
Restore your computer from your backup. -
Itunes error message "iTunes" cannot be found or created and is required.?
I try to load iTunes and receive the message as follows:
"iTunes" cannot be found or created and is required. The default location for this folder is inside "My Music" folder.
I believe this has occurred because I moved my "My Music" folder to an external drive. But when I moved it back to the internal Hard drive c: this is the result. By the way on my other internal drive d: used to store my music files also I have the same problem.
When I start iTunes with the external Drive attached it reads the external drive.
Can anyone help me overcome this problem please.
I have deleted and reinstalled two versions of iTunes without correcting this problem.
BigWhi BigW!
let's begin with this document:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, try the alternate technique in this post:
Nigel Carpenter: re: Itunes problem
love, b -
The folder "itunes" cannot be found or created and is required. The default
After I agree to the agreement screen, I receive a message "The folder "itunes" cannot be found or created and is required. The default location for this file is inside the "My Music" Folder". What is wrong? Any suggestions?
this has nothing to do with this topic, but oh well. sometimes some of my music/videos wont let me drap it and drop it into my ipod. it comes up with ! , and right now there are 200 songs on my computer that cant be listened to or put into my ipod. it says that the original files cannot be found. suggestions?
-
How to find the column name and table name with a value
Hi All
How to find the column name and table name with "Value".
For Example i have value named "Srikkanth" This value will be stored in one table and in one column i we dont know the table how to find the table name and column name
Any help is highly appricatable
Thanks & Regards
Srikkanth.M2 solutions by Michaels (the latter is 11g upwards only)...
michaels> var val varchar2(5)
michaels> exec :val := 'as'
PL/SQL procedure successfully completed.
michaels> select distinct substr (:val, 1, 11) "Searchword",
substr (table_name, 1, 14) "Table",
substr (t.column_value.getstringval (), 1, 50) "Column/Value"
from cols,
table
(xmlsequence
(dbms_xmlgen.getxmltype ('select ' || column_name
|| ' from ' || table_name
|| ' where upper('
|| column_name
|| ') like upper(''%' || :val
|| '%'')'
).extract ('ROWSET/ROW/*')
) t
-- where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
order by "Table"or
SQL> select table_name,
column_name,
:search_string search_string,
result
from cols,
xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
columns result varchar2(10) path '.'
where table_name in ('EMP', 'DEPT')
TABLE_NAME COLUMN_NAME SEARCH_STRING RESULT
DEPT DNAME ES RESEARCH
DEPT DNAME ES SALES
EMP ENAME ES JONES
EMP ENAME ES JAMES
EMP JOB ES SALESMAN
EMP JOB ES SALESMAN
EMP JOB ES SALESMAN
EMP JOB ES PRESIDENT
EMP JOB ES SALESMAN
9 rows selected. -
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
I can longer find the airplay icon on my iPad when I double click the home icon. It worked fine and i used it for a couple of weeks to mirror with the Apple TV and then it mysteriously disappeared. Now when I double click and slide the icons at the bottom to far left, instead of finding airplay there is an extra music icon and a music control panel. If I open up the music app, there is an airplay icon top right next to volume control which works fine with mirroring the Apple TV, which suggests to me wi-if and networks are fine. I can only mirror music however. Any ideas anyone?
Hello there, Catherine351.
The following Knowledge Base article has some great in-depth information and steps to troubleshoot the issue you're describing:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
If the issue persists, the Additional Information section has a supplemental link for how to resolve issues with Multi-Tasking that may prove useful as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
When I connect my Iphone 5 to Itunes, Itunes either freezes up or I get a message saying Itunes cannot connect to this phone and I need to restore Iphone.
After uninstalling and reinstalling Itunes- issue was fixed. Thanks!
-
I installed Nokia PC Suite software including a music player. I opened iTunes so that I could transfer music to my mobile phone. My iTunes response was that it could not locate my music files. So, I uninstalled all of my Nokia software, and restarted iTunes. My music list comes up, but when I try to play a tune, I get the message that iTunes cannot locate my music files, and asks me if I want to locate them. When I answer, it lets me locate the music one song at a time. How do I get iTunes to "locate" the entire file in one block action?.
Hi Hardrick!
Here is an article that can help you with finding your lost media in iTunes:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
Occasionally, some of the image borders turn dark grey (medium grey is the default) and then random other images cannot be opened with a double click. They only open when selected using the arrows on the keyboard. They also cannot be moved to collections. Anyone have a solution for this?
When you say "could not be opened"- what are you referring to? A double click of the mouse should view the clicked image in Loupe view- the same as pressing [E] on the keyboard for an enlarged view. (And a second double-click will take you back to library grid view.)
To "open" an image in the Development module requires you to select the image then press [D] or click on the [Develop] button.
When you say "could not be ...moved" -what are you referring to? Are you trying to move an image file from its place in a folder to another folder? Are you just wanting it in a collection? When you drag an image to a collection you are only placing a link to the image in the collection- not actually moving any file. The image will stay exactly where it is in its original folder and will remain as a thumbnail preview in the Library Grid view.
Are you having any "mouse" problems that may be changing its actions in LR ?
Do you see an exclamation mark on any image borders ?
Let's keep working on this. I am curious to see you find an answer.
Rob
Maybe you are looking for
-
How can I listen to music from iphone 4s via apple tv whilst doing a phone call at the same time?
How can I listen to music from iphone 4s via apple tv while doing a phone call at the same time? When I take a call on the iphone, iphone stops streaming the music to apple tv until I finished the call. thx! Claus PS: did ask the same question to app
-
Connecting Crystal Reports to SAP BW BEx query
Post Author: mfrank CA Forum: Data Connectivity and SQL We have used Crystal Enterprise 8.5 to connect to an SAP BW BEx query in the past, however we are having some difficulties. Rather than trying to upgrade our old CE system, I've been told that
-
How do I reduce the number of pixels in my photos?
How do I reduce the number of pixels in my photos?
-
Problem with a primary key when creating a new record in Forms
My table has a field - MDD_KEY - that is a primary key. It is updated from a sequence with a before-insert database trigger. I know this works properly as the primary key was accurately populated when I inserted 1433 records. In Forms 6, I have a for
-
HT4913 iTunes match subscription and device association
I have recently purchased an itunes match subscription and I was able to associate it with my new ipad mini, but when I try to turn on itunes match on my iphone 5 and original ipad it won't work. I get an error message that says that I do not have a