Itunes cannot find my device after update, cannot restore my iphone

PLEASE HELP, I HAVE TRIED TO UPDATE MY PHONE, HAVE LOST EVERYTHING AND NEED TO RESTORE. iTUNES NOT RECOGNIZING DEVICE.

try to restore in DFU mode..connect your device and press turn on/off button and home button your device will get restart and after sometime it gets totally blank that means it is in DFU mode..now your device will get detected my itunes..

Similar Messages

  • Since yesterday iam facing problem my iphone 5 doesn't get activated, i tried even with i tunes it give me this message : iTunes cannot restore the iphone because Find My iphone is on. please help me

    since yesterday iam facing problem my iphone 5 doesn't get activated, i tried even with i tunes it give me this message : iTunes cannot restore the iphone because Find My iphone is on. please help me

    If you are a developer, go here:
    solution to Activation Lock with expired iOS 7 beta:
    https://devforums.apple.com/message/880712#880712
    (thanks to suzan135 for the link)
    If you are not a developer, your favorite search engine may provide some direction.

  • HT201210 I am getting an error message 2003 as the reason why itunes cannot restore my iphone. Any advice would be greatly appreciated

    HI
    I tried installing ios7 via itunes. It took a back up of the iphone no problem, then installed ios7. When I went to restore the iphone the last back up was not the one done today. When i tried to restore it I got and error message 2003 which is not listed on the useful information list of error messages.
    I would realy appreciate it if anyone could throw some light on what has happened and suggest anything that might help
    thanks

    Well, it is indirectly addressed in that list.  These suggestions should assist:
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you're using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that doesn't resolve the issue, try the USB issue-resolution steps listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • Itunes not detecting any device after update to 10.6.3

    i have just updated itunes to version 10.6.3 and not it will not detect my iod touch or my ipod classic. i have tried it will an iphone 4 aswell and it is not detecting  that either.
    i have rebooted my ipods and my computer. i have also uninstalled and reinstalled apple mobile device driver and it still will not detect any devices.
    when i try to put my ipod tocuh into recovery mode itune does still not detect it.
    my computer dectects my ipod touch and my iphone 4 as still cameras and detects my ipod classic as a usb mass storage device.
    any suggestion will be very helpful
    thanks

    Try removing and reinstaling all the Apple software:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • "iTunes cannot restore the iPhone 5 because the backup session failed im trying to back it up from my iphone 4s

    Hi!
    i am trying to back up my iPhone 5 data from my previous iPhone 4s but the session keep failed... i was reading and they said maybe its from the Firewall, i have turned them off but the problem still there!
    i am trying to bakc it up since 2 months now and i didnt use it yet cuz i cant access my data!!
    please i need your help urgently

    This means when you backed up your device you clicked encrypt backup... That means you need a password to unlock the backup and restore to it. Call apple support for help if you forgot your password.

  • HT4528 iTune cannot restore my iPhone 4S

    I tried to restore my iPhone 4S and I got a 3004 error.  Is there anyway to fix this?
    David

    See here for trobleshooting help:
    http://support.apple.com/kb/ts3694

  • My iphone 5c wont work after update from ios 7 to ios 8, is on recovery mode but my itunes wont find my device to restore it

    I update my iphone 5c ios 7.1.2 (i think) to ios 8.0.2, however when it was intalling it suddently stppoed and my iphone only displayed the itunes icon with the cable plug in in the screen. I searched all over the internet for the solution and it says to turn the device into recovery mode and plug it to itunes so it can restore with ios 8 on it, however my itunes doesnt find my device in any way, i tried updating my itunes my windows everything, but still doesnt work, help please!!

    If  your phone is in recovery mode, all data on it are gone.  Certainly before performing a software update, you backed up your data and imported your important photos onto your computer, right?

  • Please Help!!! 'iTunes cannot connect to iphone update software server'

    I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
    Not sure what to try next, have tried setting up new user to no avail.
    I have followed the support guidance and I am not connected through proxy.
    Diagnostics reported as follows:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Inc. Dell DV051
    iTunes 9.2.1.5
    QuickTime 7.6.6
    FairPlay 1.8.20
    Apple Application Support 1.3
    iPod Updater Library 9.2d4
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.1.0.62
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 2.0.2.0 (214.3)
    iTunes Serial Number 098625257EFAC14A
    Current user is an administrator.
    The current local date and time is 2010-07-25 12:16:28.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    Intel(R) 82915G/GV/910GL Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.77
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: No
    DHCP Server: 255.255.255.255
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 192.168.1.1
    192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-07-25 10:25:45.
    ** Device Connectivity Tests **
    iPodService 9.2.1.5 is currently running.

    Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
    1: Make sure your whole iTunes database is backed up.
    2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
    I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
    3: Re-install the correct version of iTunes fresh and try again.

  • The iTune cannot detect my iPhone. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

    The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

    The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.

  • HT1414 itune cannot restore or update my ipad without the passcode. My kid forgot the passcode.

    There must be a way.  I cannot restore or update my 1st gen Ipad because it is locked with a passcode. help....

    Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
    iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

  • HT201210 cannot restore my iphone 5. After attempting to install a new update 3 times. Never had a problem with this before?

    Cannot restore my IPhone 5, after attempting to install the new ios 7.0.6 software. Checked and approved by my internet security. My phone keeps asking me connect to itunes. My phone will not restore, can anyone help. My phone very important for my work. Please, thank you.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.

  • How itunes cannot sychrnoise with iphone after upgrading latest IOS

    why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

    Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • HT201210 i have this error ''the iphone *** cannot be updatet at this time because the iphone software update server could not be countacted ore is temporarily unavailable'' i have 2-3 days tha  try to update or restore the iphone but tha same again :/ pl

    i have this error ''the iphone *** cannot be updatet at this time because the iphone software update server could not be countacted ore is temporarily unavailable'' i have 2-3 days tha  try to update or restore the iphone but tha same again :/ plzz helppp

    Try updating directly on the device, via iTunes on the computer, and iTunes on a different computer.
    If the iPhone has been hacked or jailbroken, it may not be possible to update.

  • IPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?

    I tried to update to IOS 4.3.4 today but now my iPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?
    (With the old discussion groups it was easy to see where other people had similar problems, these new groups seems clunky in comparison)

    OK, fixed it by using SHIFT+RESTORE to load the iPad1,1_4.3.4_8K2_Restore.ipsw  file in directly from the
    C:\Documents and Settings\<user name>\Application Data\Apple Computer\iTunes\iPad Software Updates
    folder.
    No idea why the upgrade to 4.3.3 failed in the first place and no idea why iTunes was not clever enough to just do it by itself when it detected that there was a problem in the first place.

Maybe you are looking for

  • Ni pxi 5122

    Bonjour, je vais déclencher une ligne vidéo (HD ) a partir d'un ni-pxi 5122 et un trigger extérieur(external TRIG). avez vous une idée sur ce  trigger comment  peut-être sa fréqunece,amplitude..?

  • Re: RTX Dualphone 4088 contact name and number una...

    Hi, I've got this problem does not show is contacted, which he calls on your landline, probably would not have wanted to upgrade firmware, you can not help me?

  • CF8 bug - cfswitch/cfcase

    I've come across a coldfusion bug with some existing code after upgrading to coldfusion 8. I have 5 pages each with a set of cfcase's inside a cfswitch. Right after upgrading to cf 8 they all gave me the following error: Context validation error for

  • Is it possible to trick iCal into making an .ics without an RSVP?

    Hi everyone I've been getting a situation where iCal allows a user to create, or a user is tricking iCal into creating, a badly formatted .ics file. It happens after a few shuffles of attendees to an event, some more people being invited, others bein

  • Can't reload

    hi when i try to reload my q10 device via blackberry link i get the message "there are no blackberry device software updates available. how do i fix that.