Itunes cannot read from or write to disk

So I just got this new notebook, and I moved all my itunes files over and tried to sync my ipod touch. It didn't work out so well... I got an error message saying that the disk could not be found, it begins to sync and then I got an additional message saying that the ipod could not be read from or written to.

Pack the old ipod up and send it back, soon or they will charge you $119 on your Credit Card. Sounds like there may be a possibility that your ipod shuffle may not be communicating with your USB ports properly. Try running the ipod updater software and try restoring the ipod. If that does not work, test your shuffle on another computer to see if it may not be an issue with the USB port. I know the 20GB works fine...But it still just may not communicate properly for some reason. As for updating the shuffle, I create a playlist in my itunes and when I plug in my shuffle, it gives me an option to autofill. I just select the playlist I want loaded to my ipod and hit autofill...Which works just fine for me.

Similar Messages

Cannot Read from or Write to Disk

Can someone tell me why i get this message? I want to delete some things, so I clicked the option to manually manage songs, however, when I do then delete and go to update the ipod, i get this message. any solutions??
thanks ~ eileen

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

"Can't read from or write to disk...." iPod error

I recently switched from my old PowerBook G4 (running Leopard 10.5.2) to a newer MacBook Pro (running Leopard 10.5.5). I migrated my account and permissions from the PB to the MacBook Pro, and everything is working just fine except for iTunes (version 8.0.2) and my older 160 GB iPod Classic (running 1.1.2).
NOTE: THE VERSION OF iTunes ON THE PB WAS VERSION 8.0.1.
Since the migration, I've been getting this "can't read from or write to disk..." error whenever I attempt to sync my iPod to iTunes. Previously, I'd never had any problems. I have tried to restore the iPod using iTunes - didn't work. I have tried different USB to dock connector cables - didn't work. I have even tried completely re-formatting the iPod using Disk Utility - didn't work. Everytime I begin syncing the iPod, it starts out just fine. At varying degrees of completion it ALWAYS fails with the same error.
I had an idea. I tried syncing the iPod to a different computer - my G5 4 x 2.5 GHz (running Leopard 10.5.5) with iTunes (version 8.0.2). I still got the same error. I haven't dropped it, submerged it in water or done anything to it that would otherwise compromise its functionality. So, I'm at a loss.
PLEASE! PLEASE! PLEASE!
Does anyone have any other suggestions? - OTHER THAN BUYING A NEW IPOD

UPDATE:
OK, after the visit to my Genius Bar; I thought of a variable that wasn't previously considered. Because their transfer of media was successful without the slightest hitch, I had to figure out something else.
Everytime I had tried to sync the iPod with my various Macs, I was using the same process. Since all of my music and movies "live" on an external 500 GB drive, I was attempting to use that same drive whenever I would try to sync. It occurred to me that possibly the failing was in the drive and not the iPod.
I have part of that library on a Power Mac G4 867 DP (running 10.4.9). I updated the iTunes on that machine to 8.0.2, connected the iPod and made a successful transfer of a large amount of media!
My only problem now is that I can't figure out how to get the 500 GB drive to stop hanging on transfer and update of my Genius information. The drive just completely stalls and I get the spinning wheel from iTunes and the application ceases to respond. When I force quit iTunes, the drive recovers fine. I don't have any problems transferring data to and from it and Disk Utility reports that the drive is healthy.
I have tried re-installing iTunes on all affected Macs - didn't help. I believe my problem may exist in the iTunes Library file or in the associated .xml document. My only concern is that if I do a completely fresh install of iTunes where those files would be re-created, I would lose all of my play and ratings data as well as the information about when my files were added. On a related note, when playing the music from this drive through iTunes. I don't have any issues at all.
ANY SUGGESTIONS?

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~Drew

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Cant read from or write to disk...

I am having a problem with my Click-wheel iPod which has worked flawlessly for the 2+ years I have had it. For me, this problem just started happening with the release of iTunes 7.02 which seems to correlate. When syncing with iTunes, it will copy anywhere from 15-150 songs at one time before giving the message [Exclamation point] "Attempting to copy to the disk {ipod name} failed. The disk could not be read from or written to." Nothing other than the iTunes version has changed with my desktop (same USB port, same hardware, same cable, etc.)
Since I found no issues on the apple forum about this I searched elsewhere and found the following link:
http://elyliu.com/blog3/2006/05/01/the-ipod-cannot-be-updated/
Clearly there are a LOT of frustrated iPod owners out there having the same issue. What is Apple doing about this? How is this going to be resolved? I am hopeful that the company is not going to simply pretend it doesn't exist as was asserted by some of the posters in this forum. Please help...
For clarification I am using iTunes 7.02 running on OSX 10.4.8 and the iPod has been restored using the most up-to-date firmware.
1.8 Ghz G5 Single Proc Mac OS X (10.4.8)

Jeff,
Thanks but I have already either tried the items in this article or determined they are not issues. I have a video iPod and an iPod shuffle that both successfully sync with iTunes. Given that, I am guessing that I have no issues with iTunes, PC Disk corruption, PC hardware and/or cabeling, or bad music files.
Also, since the click-wheel seems to copy songs with no issue up to a point, I also don't believe there are physical connector issues with it. It appears to be some type of buffer issue that gets overloaded or some type of data field that causes the problem. If it happens on a given song, I can go right back and sync again and it will copy the song it bombed out on last time and another 15-150 songs before doing it again. It is likely an application or driver issue as it is happening to both PC and Mac users.
I also think Apple needs to take a serious look at the article you sent and ask themselves, "Who really wants to go through all of this to listen to their music?". For a company that is "all about the user experience" they seem to be conveniently turning a blind eye to the pain they inflict on iPod owners. If the product truly is this unstable then maybe a re-engineering is in line...

Converting WAV files to AAC Error convert Can't read from or write to disk

For several weeks I had no problem converting WAV files (from an Olympus Digital Recorder) to AAC format in iTunes, then one day I clicked "Convert Selection to AAC" and received the message "Error occured while converting the file. The disk could not be read from or written to." There is no Error # associated with the Error message.

I recently spent over 14 hours converting all my CD songs to WAV. WAV conversion was the only one of two options available with my older Nero software, and MP3 conversion was not an option. I intended to make mixed CD's. By the time I was done, I had over 300 songs that take up over 17 GB in this WAV format.
The thought of sitting even more endless hours making these CD's made me even more exhausted, and I realized that I should get with the times and get an MP3 player. So, I bought an iPod directly from Apple two days ago (12/16), and get this, MaclessInAZ, the sales person told me that I all my WAV files could be imported into my iPod with iTunes. (!!!)
I am very glad to have read this thread before I got my iPod. I would have been so upset if there was no easy solution. My new iPod is supposed to be delivered tomorrow, and I am looking forward to getting it. Many thanks to weavercs for the information on the Switch program that converts WAV to MP3. Even if I decide to buy the full version of Switch, it is a lot less expensive than other conversion programs that I just found online, like Roxio.

Unable to Read from or Write to Disk

What exactly does that mean? And why is it all of the sudden I cannot add podcasts or tv shows to my Ipod? It just started.
I am technologically challenged, please give easy directions.
Gateway Windows XP

From reading these boards, I am not the only one having this problem. The referred to article did not apply to my problem. My computer was up-to-date, I had added no software, I hadn't added any new hardware, the cables were the same and functioning.
This is what I did. I plugged in my I-pod with "My Computer" screen open, when the icon appeared showing the removable disk was being read (contrary to I-tunes assertions that my I-pod wasn't viable)I clicked on that to see the stats on my I-pod. But, almost immediately, I-pod began downloading all of the new items I needed, pocasts and songs purchased.
I have one more I-pod to fix, I am hopeful this will work again.

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

Cannot read from the source file or disk

I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter

Whenever i try and download itunes it says it cannot read from specified device, what can I do?

Whenever I try to download itunes it says it cannot read from specified device, what do I do?

Honestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

ITunes Reports "iTunes Cannot read the contents of the iPod...."

This morning I connected my 2 week old iPod Classic to my laptop via the USB cable and iTunes came up and displayed a message saying "iTunes cannot read the contents of the iPod MHAM'S IPOD". It suggested a restore, which I have not tried yet. I have faithfully used the "Eject" function in iTunes to disconnect. After reading some other posts in the forums, it appears that others are having a similar issue. I'm concerned that this is normal operating behavior for this product. Given that this is my first Apple brand purchase, I'm a little turned off to the brand. Does anyone have a suggestion that doesn't involve me wiping this thing clean and starting over? And is this something that I should just expect? I ran a diagnostic and the results are below.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D620
iTunes 7.4.3.1
iPodService 7.4.3.1 is currently running.
iTunesHelper 7.4.3.1 is currently running.
Current user is an administrator.
The current local date and time is 2007-10-16 07:04:02.
Connected Storage Devices:
Disk drive, Hitachi HTS541080G9SA00, Bus Type ATA, Bus Address [0,0]
Disk drive, Apple iPod USB Device, Bus Type USB
Disk drive, RIM BlackBerry SD USB Device, Bus Type USB
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No IEEE 1394 Host Controller found.
The iPod Service Logging Information:
[SERVICE: 0xF88,06:40:36 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Tue Oct 16 06:40:36 2007)
[SERVICE: 0xF88,06:40:36 INFO] ##### iPodService starting as a service, version: 7.4.3.1
[SERVICE: 0xFD0,06:40:36 INFO] Adding iTunesHelper to session 0
[SERVICE: 0xF98,06:40:36 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x114,06:40:36 INFO] Listener Window created
[SERVICE: 0x114,06:40:57 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:58 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:40:59 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:41:40 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:42:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:44:25 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:45:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:48:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:50:15 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:09 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,06:57:13 INFO] device is an iPod
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,06:57:13 INFO] [-1] set waiting to mount = 1
[SERVICE: 0x114,06:57:13 INFO] [1] Assigning session 0
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,06:57:13 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,06:57:13 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #0 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [1] input #0
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #1 from src #0
[SERVICE: 0x11C,06:57:13 INFO] [1] input #1
[SERVICE: 0x114,06:57:13 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,06:57:13 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,06:57:13 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,06:57:13 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,06:57:13 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,06:57:13 INFO] [1] input #2 from src #0
[SERVICE: 0x128,06:57:13 INFO] [1] input #2
[SERVICE: 0x114,06:57:13 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:57:13 INFO] [1] input #3 from src #0
[SERVICE: 0x118,06:57:13 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x118,06:57:13 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0x118,06:57:13 INFO] [1] set waiting to mount = 1
[SERVICE: 0x118,06:57:13 INFO] [1] input #4 from src #0
[SERVICE: 0xEC,06:57:13 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:14 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x128,06:57:14 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x128,06:57:14 INFO] [1] input #3
[SERVICE: 0xEC,06:57:14 INFO] [1] input #4
[SERVICE: 0x128,06:57:14 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0x128,06:57:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 INPUT #4] - (HDW) Interface Arrival
[SERVICE: 0xEC,06:57:14 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [1] progress is now 2
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xEC,06:57:14 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xEC,06:57:14 INFO] VendorId: Apple
[SERVICE: 0xEC,06:57:14 INFO] ProductId: iPod
[SERVICE: 0xEC,06:57:14 INFO] revision: 1.62
[SERVICE: 0xEC,06:57:14 INFO] vendor bytes:
[SERVICE: 0xEC,06:57:14 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0xEC,06:57:14 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xEC,06:57:14 INFO] [1] Power State: Powered
[SERVICE: 0xEC,06:57:14 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xEC,06:57:14 ERROR] Did not find first letter of stage
[SERVICE: 0xEC,06:57:14 INFO] got HotPlugState 0
[SERVICE: 0xEC,06:57:14 INFO] [1] serial number 000A27001547056B
[SERVICE: 0xEC,06:57:14 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0xEC,06:57:14 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x118,06:57:14 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0x118,06:57:14 INFO] [VolumeArrive] mask = 0x7C
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\G:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\F:
[SERVICE: 0x118,06:57:14 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x118,06:57:14 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x118,06:57:14 INFO] [1] set waiting to mount = 0
[SERVICE: 0x118,06:57:14 INFO] [1] input #5 from src #0
[SERVICE: 0x118,06:57:14 INFO] looking up device # for \\.\E:
[SERVICE: 0x11C,06:57:14 INFO] [1] input #5
[SERVICE: 0x118,06:57:14 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x118,06:57:14 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\.\D:
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x0 partition 0x3
[SERVICE: 0x118,06:57:15 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x118,06:57:15 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x118,06:57:15 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:57:15 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:15 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,06:57:15 INFO] got HotPlugState 0
[SERVICE: 0x11C,06:57:19 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,06:57:19 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,06:57:19 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,06:57:19 INFO] 6:57:19, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,06:57:19 INFO] [1] progress is now 0
[SERVICE: 0x11C,06:57:20 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,06:57:20 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,06:57:20 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0xF90,06:57:21 INFO] Getting iTunesHelper for session 0
[SERVICE: 0xF90,06:57:21 INFO] launching iTunes.
[SERVICE: 0x90C,06:57:25 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:57:25 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:25 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:25 INFO] Mounted
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:25 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:25 INFO] Mounted
[SERVICE: 0x90C,06:57:25 INFO] [1] already mounted!
[SERVICE: 0x90C,06:57:25 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:57:26 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:57:26 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:57:26 INFO] Mounted
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:26 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:26 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:57:27 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:27 INFO] Mounted
[SERVICE: 0x90C,06:57:27 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:27 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:57:27 INFO] Mounted
[SERVICE: 0xFD8,06:57:27 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:57:27 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:57:40 INFO] Mounted
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:57:40 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:57:40 INFO] Mounted
[SERVICE: 0x90C,06:57:40 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:57:40 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> Got Serial #
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] [1] already mounted!
[SERVICE: 0x90C,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x90C,06:58:19 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xFD8,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:19 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0x90C,06:58:19 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:19 INFO] Mounted
[SERVICE: 0x90C,06:58:19 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:19 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:19 INFO] Mounted
[SERVICE: 0xFD8,06:58:19 INFO] [1] already mounted!
[SERVICE: 0xFD8,06:58:19 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,06:58:23 INFO] Mounted
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,06:58:23 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,06:58:23 INFO] Mounted
[SERVICE: 0x90C,06:58:23 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,06:58:23 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,06:58:26 INFO] [1] input #6 from src #4
[SERVICE: 0x128,06:58:26 INFO] [1] input #6
[SERVICE: 0x128,06:58:27 INFO] [MACHINE 1 INPUT #6] - (APP) Unmount
[SERVICE: 0x128,06:58:27 INFO] [1] Begin...
[SERVICE: 0x128,06:58:27 INFO] [1] Mounted state
[SERVICE: 0x128,06:58:27 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:27 INFO] [1] Begin Unmounting...
[SERVICE: 0x128,06:58:27 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:27 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:27 INFO] Ejecting media
[SERVICE: 0x128,06:58:27 INFO] SUCCESS
[SERVICE: 0x128,06:58:27 INFO] Volume lock success!
[SERVICE: 0x128,06:58:28 INFO] total locks = 3, caller = 296, caller locks = 3
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW stop
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #7 from src #0
[SERVICE: 0xEC,06:58:29 INFO] [1] input #7
[SERVICE: 0x114,06:58:29 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:29 INFO] [1] input #8 from src #0
[SERVICE: 0x11C,06:58:29 INFO] [1] input #8
[SERVICE: 0x128,06:58:29 INFO] CMQuery_And_RemoveSubTreeW took 625 ms
[SERVICE: 0x128,06:58:29 INFO] total locks = 2, caller = 296, caller locks = 2
[SERVICE: 0x128,06:58:29 INFO] total locks = 1, caller = 296, caller locks = 1
[SERVICE: 0x128,06:58:29 INFO] [1] Finished Unmounting with status 1
[SERVICE: 0x128,06:58:29 INFO] total locks = 0, caller = 296, caller locks = 0
[SERVICE: 0x128,06:58:29 INFO] [1] Ext app unmount request finished!
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,06:58:30 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,06:58:30 INFO] [VolumeRemoved] existing mask 0x20, arrive mask 0x20
[SERVICE: 0x114,06:58:30 INFO] [1] value = 1
[SERVICE: 0x114,06:58:30 INFO] [1] input #9 from src #0
[SERVICE: 0x128,06:58:30 INFO] [1] input #9
[SERVICE: 0x114,06:58:30 INFO] [InterfaceRemoved]
[SERVICE: 0x114,06:58:30 INFO] [1] value = 0
[SERVICE: 0x114,06:58:30 INFO] removed device number 2 from m_objDeviceNumberMap
[SERVICE: 0x114,06:58:30 INFO] [1] input #10 from src #0
[SERVICE: 0xEC,06:58:30 INFO] [1] input #10
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 INPUT #9] - (HDW) Volume Unmount
[SERVICE: 0x128,06:58:30 INFO] [1] progress is now 3
[SERVICE: 0x128,06:58:30 INFO] [1] Setting progress to 3
[SERVICE: 0x128,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Connected}
[SERVICE: 0x128,06:58:30 INFO] [1] *** UNMOUNTED - Sending event out, device session 0.
[SERVICE: 0x128,06:58:30 INFO] [1] !!!!! DoConnectStateAction() INTERRUPTED.
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 INPUT #10] - (HDW) Interface Removal
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0xEC,06:58:30 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,06:58:30 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0xEC,06:58:30 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,06:58:30 INFO] [1] progress is now 0
[SERVICE: 0xEC,06:58:30 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #11 from src #0
[SERVICE: 0x11C,06:58:38 INFO] [1] input #11
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #12 from src #0
[SERVICE: 0x128,06:58:38 INFO] [1] input #12
[SERVICE: 0x114,06:58:38 INFO] [DevNodesChanged]
[SERVICE: 0x114,06:58:38 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,06:58:38 INFO] [1] input #13 from src #0
[SERVICE: 0xEC,06:58:38 INFO] [1] input #13
[SERVICE: 0x11C,06:58:38 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0x11C,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x128,06:58:38 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x128,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0xEC,06:58:38 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xEC,06:58:38 INFO] [1] PHYSICALLY DISCONNECTED!
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #14 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [1] input #14
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #15 from src #0
[SERVICE: 0x128,07:02:24 INFO] [1] input #15
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #16 from src #0
[SERVICE: 0xEC,07:02:24 INFO] [1] input #16
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #17 from src #0
[SERVICE: 0x114,07:02:24 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:24 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x114,07:02:24 INFO] [1] input #18 from src #0
[SERVICE: 0x11C,07:02:24 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x128,07:02:24 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x128,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xEC,07:02:24 INFO] [1] input #17
[SERVICE: 0x11C,07:02:24 INFO] [1] input #18
[SERVICE: 0xEC,07:02:25 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:25 INFO] [MACHINE 1 INPUT #18] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:25 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x114,07:02:27 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x0
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 1
[SERVICE: 0x114,07:02:27 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x114,07:02:27 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x114,07:02:27 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x114,07:02:27 INFO] [1] added device number 2 to m_objDeviceNumberMap
[SERVICE: 0x114,07:02:27 INFO] [1] input #19 from src #0
[SERVICE: 0x128,07:02:27 INFO] [1] input #19
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #20 from src #0
[SERVICE: 0xEC,07:02:27 INFO] [1] input #20
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #21 from src #0
[SERVICE: 0x11C,07:02:27 INFO] [1] input #21
[SERVICE: 0x114,07:02:27 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0x114,07:02:27 INFO] looking up device # for \\.\F:
[SERVICE: 0x114,07:02:27 INFO] type 0x7 drive 0x2 partition 0x1
[SERVICE: 0x114,07:02:27 INFO] iTunes device #2 found with drive letter F, mask 0x20
[SERVICE: 0x114,07:02:27 INFO] [1] set waiting to mount = 0
[SERVICE: 0x114,07:02:27 INFO] [1] input #22 from src #0
[SERVICE: 0x114,07:02:27 INFO] [DevNodesChanged]
[SERVICE: 0x114,07:02:27 INFO] [1] input #23 from src #0
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #19] - (HDW) Interface Arrival
[SERVICE: 0x128,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [1] progress is now 2
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x128,07:02:28 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x128,07:02:28 INFO] VendorId: Apple
[SERVICE: 0x128,07:02:28 INFO] ProductId: iPod
[SERVICE: 0x128,07:02:28 INFO] revision: 1.62
[SERVICE: 0x128,07:02:28 INFO] vendor bytes:
[SERVICE: 0x128,07:02:28 INFO] 02 01 00 00 00 00 00 00 00 13 00 00 92 00 00 00 00 00 00 00
[SERVICE: 0x128,07:02:28 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x128,07:02:28 INFO] [1] Power State: Powered
[SERVICE: 0x128,07:02:28 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x128,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x128,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x128,07:02:28 INFO] [1] serial number 000A27001547056B
[SERVICE: 0x128,07:02:28 INFO] Checkpoint successfully read from device [1]. Apple Serial Number [8N7344U3YMV]
[SERVICE: 0x128,07:02:28 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xEC,07:02:28 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xEC,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #21] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] input #22
[SERVICE: 0x128,07:02:28 INFO] [1] input #23
[SERVICE: 0xFD8,07:02:28 INFO] <0x4> Got Serial #
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x128,07:02:28 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0x11C,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x128,07:02:28 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a27001547056b&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x11C,07:02:28 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:28 ERROR] Did not find first letter of stage
[SERVICE: 0x11C,07:02:28 INFO] got HotPlugState 0
[SERVICE: 0x11C,07:02:33 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x11C,07:02:33 INFO] [1] ===== iPod with Video =====
[SERVICE: 0x11C,07:02:33 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x11C,07:02:33 INFO] 7:2:33, year 2007, day of yr. 288, GMT offset -20 isDST 1
[SERVICE: 0x11C,07:02:33 INFO] [1] progress is now 0
[SERVICE: 0xFD8,07:02:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:33 INFO] Mounted
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:33 INFO] Mounted
[SERVICE: 0x90C,07:02:33 INFO] [1] already mounted!
[SERVICE: 0x11C,07:02:34 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x11C,07:02:34 INFO] [1] Auto-launch iTunes ENABLED
[SERVICE: 0x11C,07:02:34 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
[SERVICE: 0x90C,07:02:34 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x90C,07:02:34 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x90C,07:02:34 INFO] Mounted
[SERVICE: 0x90C,07:02:34 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:02:34 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:02:34 INFO] <0x4> COM request for device 1 drive letter - F
[SERVICE: 0xFD8,07:02:35 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:02:35 INFO] Mounted
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:02:35 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:02:35 INFO] Mounted
[SERVICE: 0x90C,07:02:35 INFO] [1] already mounted!
[SERVICE: 0x90C,07:02:35 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xF8C,07:02:35 INFO] iTunes already running in current session.
[SERVICE: 0x90C,07:03:51 INFO] Mounted
[SERVICE: 0x90C,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x90C,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xFD8,07:03:51 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xFD8,07:03:51 INFO] Mounted
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xFD8,07:03:51 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x90C,07:03:51 INFO] <0x4> GetFormatType() returned unknown format 0
The iPod updater logging file cannot be found.

I had this same exact issue happen to me this morning, and I lost 40 gigs worth of transferring in restoring it. I put a few albums on for the day, and when I tried connecting again this evening, the same thing happened. It hit me when it happened the second time that both times I had the iPod locked when it connected it to the computer. I'm pretty sure I've never accidentally connected it while locked before. My guess it that it is unable to read the content since the iPod is locked, and somehow this causes some sort of corruption that prevents it from seeing the files until a restoration is done. I would think Apple should be able to release an update which would detect if the iPod was locked and tell you to unlock it rather than to go through this process of losing all your music from the iPod. It scares me to think this could happen again simply if I am absent-minded in the future and forget to check whether it is locked or not before I connect it.

ITunes cannot read the contents of iphone "Teresa Pearcy". Help?

Everytime I plug in my phone to charge, this is what pops up. "
ITunes cannot read the contents of the iphone "Teresa Pearcy". Go to the Summary Tab in iphone preferences and click Restore to restore this iphone to factory settings."
It also says if I do this then I will lose everything that's been put into my phone.
I've even tried everyway I know to get around iTunes just to get a new ring tone downloaded. I can't get any of my music... I don't want to lose what I have on my phone already by restoring it to factory settings.
It will transfer photos from iphone to computer. But nothing else.
I've been struggling with this since I got the phone. Can anyone help me out with this?? Please? It's been very frustrating. Thank you.

Hi,
I've the same problem too.
I had made iPhone sync on my PC in the past. But my HDD went in trouble and I had to buy another and reinstall Windows, so I lost my iTunes library.
Having no sync was ok, since I was comfortable with the photos, applications and music in my iPhone.
But yesterday my iPhone went out of disk space, and my problem started. I then needed to sync. I tried to extract my paid applications from iPhone using "transfer purchases from my iPhone". Unsuccessful, since it did not copy every application. I've tried to download the applications again, but iTunes say I need to pay for them. And now, after some unsuccessful purchase transfers and backups, iTunes says "iTunes cannot read the contents of iPhone", so I think I'm forced to restore the original settings.
What should I do?
I don't want to pay again for the applications I already purchased.
I don't want to loose my application data.
I don't care about my music, photos and videos, cause I can get them elsewhere anyway.
Is there a way to save my iPhone, applications and data?
Thanks

ITunes cannot read the contents of iPhone/iPod Touch?

After following these instructions to update iTunes https://discussions.apple.com/message/21853130#21853130 , Whenever i connect my iPod Touch 5th gen i get this message:
iTunes cannot read the contents of the iPod “(my ipod name)”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
i click ok then iTunes says:
The software required for communicating with the iPod is not installed correctly, and you must manually eject the iPod before each disconnect. Please reinstall iTunes to install the iPod’s software.
I am NOT restoring my iPod as i know this is iTunes' problem. I went to the apple website and downloaded iTunes for mac and then installed it Installer said it was succuesful but after opening itunes i get the same problem. What do i do?
I WILL NOT DO ANYTHING IN TERMINAL. I never touch terminal and never will.

Hi,
I've the same problem too.
I had made iPhone sync on my PC in the past. But my HDD went in trouble and I had to buy another and reinstall Windows, so I lost my iTunes library.
Having no sync was ok, since I was comfortable with the photos, applications and music in my iPhone.
But yesterday my iPhone went out of disk space, and my problem started. I then needed to sync. I tried to extract my paid applications from iPhone using "transfer purchases from my iPhone". Unsuccessful, since it did not copy every application. I've tried to download the applications again, but iTunes say I need to pay for them. And now, after some unsuccessful purchase transfers and backups, iTunes says "iTunes cannot read the contents of iPhone", so I think I'm forced to restore the original settings.
What should I do?
I don't want to pay again for the applications I already purchased.
I don't want to loose my application data.
I don't care about my music, photos and videos, cause I can get them elsewhere anyway.
Is there a way to save my iPhone, applications and data?
Thanks

Itunes cannot read the contents of Iphone after updating to 2.1

Hi!
I have the original Iphone and I decided tonight to upgrade to the 2.1. At the end of the process, when it was restoring my iphone contents (pics, contacts etc.), an error came up "ITunes cannot read the contents of the Iphone" and it is telling me to restore to factory settings? My phone now is updated with all the new stuff but in Itunes it is not reading my Iphone. I am trying to make a ringtone from Itunes and I can't do it because of this problem.
Please help!

Hi,
I've the same problem too.
I had made iPhone sync on my PC in the past. But my HDD went in trouble and I had to buy another and reinstall Windows, so I lost my iTunes library.
Having no sync was ok, since I was comfortable with the photos, applications and music in my iPhone.
But yesterday my iPhone went out of disk space, and my problem started. I then needed to sync. I tried to extract my paid applications from iPhone using "transfer purchases from my iPhone". Unsuccessful, since it did not copy every application. I've tried to download the applications again, but iTunes say I need to pay for them. And now, after some unsuccessful purchase transfers and backups, iTunes says "iTunes cannot read the contents of iPhone", so I think I'm forced to restore the original settings.
What should I do?
I don't want to pay again for the applications I already purchased.
I don't want to loose my application data.
I don't care about my music, photos and videos, cause I can get them elsewhere anyway.
Is there a way to save my iPhone, applications and data?
Thanks

Itunes cannot read from or write to disk

Similar Messages

Maybe you are looking for