ITunes cannot see Airport Express / Windows XP

I have an interesting problem that I cannot figure out.
I am only using the Airport Express to stream music to my stereo. Therefore the Airport Express is in client mode, connected to my home network over a wireless connection (predominantly D-link hardware), WEP is enabled and working fine, and all hardware has the latest firmware. Finally, all hardware has functioning internet connections.
My Apple Powerbook with its Airport card can connect to my Airport Express (in client mode) without difficulty. The Aiport configuration programs can "see" the Airport Express and iTunes finds the device fine. The Powerbook works the way it should, and I can stream music the way I want.
However, the problem is that my IBM notebook cannot see the Airport Express through any of the configuration utilities, and iTunes on the notebook cannot find the Airport Express. I have tried disabling all firewall and antivirus software. iTunes is configured to look for remote speakers with Airtunes. No dice on streaming music from the IBM Notebook to the Airport express.
What is strange is that on the IBM notebook, I can open the Airport Admin Utility and choose "other." Then I put in the IP address for my Aiport Express 192.168.0.103, and I can communicate and configure the Aiport Express.
So the problem is iTunes cannot find the Airport Express on my IBM laptop. I have tried everything that I know of to solve the problem. I can communicate with the Airport Express on the IBM by using the "other" command in the Admin Utility. Somehow there is a flag or something that is not coming up automatically to let the notebook know that an Airport Express is in the network.
Suggestions?

Have you tried re-installing iTunes as the problem may lie with that and not the network setup itself.

Similar Messages

Laptop cannot see airport express

I have three laptops on my home network. Two can see my airport express, one cannot. I have the airport express set to join my home network automatically. I am only using airport express to be able to listen to my itunes music through my home stereo. Two laptops, my iphone, all of the ipods in my home work just fine. The laptop that does not work is a Dell Latitude E4310 (my work laptop).
Any ideas why I cannot see my airport express?

When you use the Airport Utility, does the 'printers' window show your Epson being connected via USB to the Airport Express?
Seth

Cannot see Airport Express as an Audio Output option!

Hello All,
Very frustruating.
I bought an AirPort Express hoping to use it as a Audio output device for movies/spotify etc.
Plugged it all in to my reciever (using optical cable) configured it to my TC network.
Opened itunes and the Airplay function is working perfectly. Music is streaming as expected.
However i cannot see the AE in the audio output options (when i "option+click" the speaker icon).
Tearing my hair out as this was the primary reason for purchasing the AE!
any help would be greatly apprecaited.
Tim

Trying to play movies through VLC and stream the Audio component to my AirPort express. Similary use Spotify on my computer and stream the audio component.
I thought i would be able to enable my laptop (Macbook Air) to use the Airport Express as its 'speakers' through selecting it as the output source in System preferences.
However it does not show up in the system preferences at all, what has me stumped is the Airport Express is 100% functional through itunes as well as some third party applications (Airfoil).
Im very confused as other users (from extensive google searching) appear to be able to atleast see the AirPort Express as an output device.
Any help greatly appreciated.

Cannot see Airport Express when connected to Cisco corporate wireless - used to work, stopped cooperating recently

I have had an Airport Express at my office for several years to stream iTunes. It has worked fine, including through an upgrade to a new Cisco wireless network. Then it just stopped. I have reset, and then purchased a new AE with updated firmware. I have a green light, and when I connect via an ethernet cable I am getting all green lights, and can see that I have a valid IP address on the network, the router address is correct and the DNS servers appear to be correct. I still cannot see the AE on any Apple device connected to the wireless network....... any ideas? Is this connected to any recent IOS updates? Thanks for any insights......

Found similar (unsolved) issue in the thread below.
http://discussions.apple.com/thread.jspa?messageID=6514677&#6514677
Please reply to the above thread.
thanks

Cannot See Airport Express in Airport Utility

I've been browsing the other topics, but don't see one with my exact problems.
I got an Airport Express for Christmas and was able to get it to work on my parents network; but now that I'm at home, I can't get it to even show in the Airport Utility. I've reset the AX by holding down the button for over a second. I've set my Airport Extreme to be extendable and to be n/g compatible.
I've seen advice like making the name and pass match the base station, but I can't even get to a point where I can see it...
Advice?
Thanks,
Chris

I had similar problems and was able to resolve my issue like Simon. I think you need to hard reset your Airport Extreme base station first, then open Airport Utility and reconfigure it using WAP2 encryption. Then hard reset your Airport Express (by the way, you need to unplug it, push the reset button using a paper clip and keep holding it down while plugging it back and wait until it flashes green 4 times, then release) then you should be able to see your airport express in Airport Utility, and reconfigure it to use WAP2 (I used the same password for both base stations) and, at least in my case, voila! all lights turned green and worked. Good Luck,
Ron

HT1731 Cannot see airport express...

All I get is the maddening blinking orange light. When I connect it to my airport base station with an ethernet cable its fine, once I disconnect the cable and plug my speaker miniplug in, its does nothing but blink. Not easy to set up at all....please help!

Right! Unless you intend to use the Express with an Ethernet cable plugged in to its WAN port, don't set it up that way. You are getting the blinking LED because it is looking for an Ethernet connection that no longer exists.
Unplug its Ethernet cable, "hard reset" it and configure it again.

ITunes cannot find Aiport Express via D-link

iTunes cannot find Aiport Express.
iMac and Airport Express both connected to D-link wireless router (DI-524UP). Can see Airport Express on iMac Airport Utilities, and can communicate (do changes) via the D-link network. iMac working fine with D-link for internett access also.Have set up Aiport Express to serve as extra speakers in iTunes. Airport Express connected to stereo with cable. Can choose the external speakers in iTunes. Think this means iTunes also must be communicating with Airport Express, because If I change the name of the externals speakers in Airport Express, it also changes in iTunes after clicking "update" and the Airport Express re-starts. However after choosing the external speakers in iTunes and starting a song iTunes is seeking the speakers (Airport Express) without finding it. All devices are connected to the same D-link network.
Working fine when I set up Airport Express with its own network and connecting it with iMac. Also I could connect my iPhone to my iTunes library (remote app.) This is not working in the d-Link network either.
It's a drag to have to change both the PC and the iPhone to another network every time I want to play musik on the stereo. This is why I am trying to get everything to work together in the same network (D-Link).
Somebody having met this problem before?

Correction: Downloaded an update for the D-Link, and now the iPhone is working with iMac for remote control of iTunes.
Still iTunes cannot find Airport Express when choosing external speekers

Windows 7 - iTunes doesn't see AirPort Express but AirPort Utility does..

iTunes 10.1.1.4 running on Windows 7 can not detect my AirPort Express with 7.5.2 firmware. My iPod Touch running on the same wireless router detects and will play music through the AirPort Express.
iTunes preferences are set to detect remotes (iPod Remote works to control iTunes) and the AirPort Express. Also verified that the Windows 7 firewall is set to all Bonjour to pass all UDP ports on home networks.
Need some help getting iTunes 10 to detect the AirPort Express...

I have since done a reset to factory condition and tried again and it seems to be working now. I unplugged it from the power held down the reset button and plugged it back in continuing to hold down the reset. I think you have to hold it down for nearly 10 seconds until the light flashes green 4 times and then release the button. Then try scanning for it again. It still took a little longer than I expected for it to find it after that but once it did I have not had any more problems.
At least with it; my sister is on windows and that is another story!

Itunes and Admin tool do not see Airport on Windows XP

I tried to make an airport express work with my IBM T42P laptop with Windows XP work.
Neither the Airport Admin utility or Itunes detect the Airport Express. The strange thing though is, that I can see it in the wireless connections. I can even connect to it and use the network, ping the airport express etc... Didn't tryout routing, but connecting to another computer on the network works fine also... But still, Airpot Admin utility and Itunes cannot see anything.
The Airport Setup Assistant lists the airport, but times-out and cannot connect to it.
Tried to connect from another laptop and everything worked fine, so I figured maybe it's a problem with the builtin wi-fi on the t42. Tried the wifi card from the working laptop on the t42 and still same problem.
The Windows XP is with SP2.
Checked Wireless Zero Configuration Service version numbers: All are 5.1.2600.2180
The firewall has port 5353 UDP open. Additionally itunes and the admin tool are added to the firewall - also tried to stop the firewall service.
From the other laptop flashed the Airport Express with firmware-upgrade and upgraded airport express software on th t42.
Tried to switch of QOS and other services in the network settings.
At some point, tried to connect through ethernet and couldn't see the Airport. Could have been a problem with the rest of the network though. Connecting through the admin tool when choosing other and providing the ip-address of the airport is possible, but doesn't help itunes...
Nothing helped, so to summarize:
On the old T20 with Windows 2000 everything works fine.
The T42 can wifi-connect to the network, but neither itunes nor admin-utility can see the thing. The Airport Setup Assistant lists the airport, but times-out and cannot connect to it. Can't "Identify" either.
Any suggestions would be appreciated!
Thomas

To eliminate connectivity issues - cable the PC's ethernet port directly to the ethernet port of the Airport Express. If the Airport Admin Utility fails to list your Airport Express...
I know you said you stopped the firewall service... but the problem you are having is, in the vast majority of cases, because there is indeed still a firewall running on the PC - either the one built into Windows XP, and/or the one provided by third-party software, and/or the one installed by VPN client software.

ITunes 10 does not see Airport Express because port 3689 is unavailable

I never had problems with iTunes 9 and Airport Express, but since iTunes 10 the following problem occurs regularly: iTunes starts, but does not "see" Airport Express (AE) as an external speaker. Sometimes it also loses connection after Windows hibernate mode, but that might be another issue.
What I found out is that it is NOT a firewall issue, otherwise it would not work once in a while. What I saw, though, is that TCP port 3689 is sometimes stolen by other apps like Mozilla Thunderbird (TB). I.e. if Thunderbird is started BEFORE iTunes, it might use 3689 as a listening socket. iTunes then cannot see AE until I shut down TB and restart iTunes. This is very annoying and I only found out after many weeks when watching TCP live connections in my personal firewall software.
Two questions arise:
1) If listening port 3689 is unavailable, why does iTunes not show any error message? There is absolutely no indication as to why it does not find the external AE loudspeaker. BTW, the AE config programm can connect to the hardware easily.
2) Even if port 3689 is blocked by another application, Airfoil for Windows works flawlessly with my AE. I can even tunnel iTunes through Airfoil and then listen to music in my living room, even though iTunes does not see AE. Why can a 3rd party program do something which iTunes can't?
There must be a way to smarten up iTunes and fix this annoying bug.

Nerd

Can't See Airport Express on my Wireless N/work

I have a D-Link DSL G604t router, and have spent hours trying to get it to "see" AE - no joy. I have added the MAC Address to the enabled access list but still nothing - everytime I scan for it, it cannot be found. My Compaq l/top connects no problem to the network, and I cannot find any answers in the manual. Only trying to send itunes to my hifi - don't need to share connections or printers.
Dell Optiplex Windows XP Pro

Hi:
I had a similar problem with a DLink DI-624 wireless router and AirPort Express afew months ago. Here is what you can do.
As an intermediate step, which is undocumented but I found necessary, connect your Airport Express to the wireless router via an Ethernet cable. After the wired connection, your router will definitely see AirPort Express. Then you can go through the normal network registration process. Once this is complete, you can then power off Airport Express and disconnect it from the router and then place it where you originally intended. Once the solid green light comes on (30-60 seconds), you should be able to access AirPort Express the way it was intended, in a wireless manner.
Again, this worked for me after hours of unsuccessful struggling with the installation process as described in the Apple documentation. I hope this helps.
Lawrence

Airfoil does not see airport express

I am running 10.6.8 and airfoil does not see airport express liek it used to. I am using an older version of airfoil. Any one have any suggestions so I can get my music to work through my home speakers again?
thanks

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

Cannot connect airport express to ipad I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?

cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?

I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck

My iPad appears under portable devices in W7 64bit, so iTunes cannot see it

My iPad appears under portable devices in device manager in Windows 7 64bit, so iTunes cannot see it. I have tried unistalling the device, but it always reappears as a portable device. My ipod shuffle also appears as a portable device, but it is seen in iTunes, whereas the ipad does not.

Assuming you've already tried the simple stuff like rebooting the iPad and the computer you'll probably want to check some of these items...
http://support.apple.com/kb/TS1538
Or it might just be easier to remove and reinstall iTunes. Please remove all 6 component from iTunes before downloading iTunes again.
http://support.apple.com/kb/HT1923

Trouble with iTune and multiple airport express

Hi,
I have a wifi network at home, a PC with windows XP and iTunes, and two airport express stations in other rooms.
I can't figure out why iTunes sometimes sees the "other speakers" (ie airport express stations), sometimes don't, and sometimes sees only one of the two.
The leds are always green on the remote stations, and they are seen in the airport administrator.
Closing iTunes and running it again usually helps (but not always)
Is that something anyone already experienced ?
Thx for help.
Nico

It has been working fine for two days nows, and this morning : no express stations on iTunes...
And they are neither seen in the Aiport Admin utility .
Message was edited by: NicoV

ITunes cannot see Airport Express / Windows XP

Similar Messages

Maybe you are looking for