Itunes cd burning 4310 error

I have a Dell Inspirion with Windows 8 and it every time I try to burn a cd from itunes it says error 4310. Any ideas what this is?

That particular error, 4310, has no hits in the search I did.
Can you burn with any other program?
You might have better luck in the Importing & Burning in iTunes for Windows forums
http://discussions.apple.com/forum.jspa?forumID=791
There are some clever people over there that are familiar with more burning hardware than I am.

Similar Messages

My Itunes wont burn cds --error 4208 PLEASE HELP ASAP

Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce FX 5500 (Microsoft Corporation)
Connected Device Information:
DiskDrive, Maxtor 6L200S0, Bus Type ATA, Bus Address [0,0]
DiskDrive, Apple iPod USB Device, Bus Type USB
CDROM, TSSTcorp CD-ROM SH-C522C, Bus Type ATA, Bus Address [1,0]
CDROM, _NEC DVD_RW ND-3550A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: _NEC DVD_RW ND-3550A, Rev 1.05
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
F: TSSTcorp CD-ROM SH-C522C, Rev TS01
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: _NEC DVD_RW ND-3550A on CDR media at speed 8X.

I'm also having this problem. Please help!! Thanks Heath
Here are my diagnotics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dell DE051
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
Intel(R) 82865G Graphics Controller
Connected Device Information:
DiskDrive, WDC WD1600JB-75GVC0, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: HL-DT-ST DVD+-RW GWA4164B, Rev E113
Audio CD in drive.
Found 10 songs on CD, playing time 61:14 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 07:36:17
Track 3, start time 15:01:17
Track 4, start time 19:26:62
Track 5, start time 24:56:42
Track 6, start time 30:35:47
Track 7, start time 36:48:22
Track 8, start time 43:19:60
Track 9, start time 49:01:22
Track 10, start time 56:07:02
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 24X.

Install itunes and burn cd error

When opening itunes an error message states that itunes was not installed correctly and will not burn cd's. It also states that my computer does not have a burner or software. I have been able to burn cd's on Window Media player. I have uninstalled the program and reinstalled it a number of times and the same message is displayed. Help!

I am having the same problem if you get an answer that works please let me know!

TS1436 How do I fix a 4310 error while trying to burn a CD?

How do I fix/get around the 4310 error when trying to burn a playlist to a disc?

I am having the same problem. No changes to iTunes has helped. Drivers are updated. Windows Media Player works fine
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
ASUSTeK COMPUTER INC. X55CR
iTunes 11.0.2.26
QuickTime not available
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002BB4A809A7B190
Current user is not an administrator.
The current local date and time is 2013-04-07 14:32:30.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: PIONEER DVD-RW D, Rev
Audio CD in drive.
Found 10 songs on CD, playing time 37:05 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:48:53
Track 3, start time 07:12:15
Track 4, start time 10:11:56
Track 5, start time 14:14:06
Track 6, start time 17:54:42
Track 7, start time 21:45:13
Track 8, start time 26:11:66
Track 9, start time 29:55:71
Track 10, start time 33:58:26
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive E: PIONEER DVD-RW D on CDR media at speed 10X.

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

ITunes CD Burn error (media too fast)??

I upgraded to the latest iTunes version and now Im getting errors when I try to burn a playlist. I havent burned a cd off this computer in a long time, so Im not sure if it's iTunes. However, the error, if I remember correctly,said iTunes is unable to burn the playlist because the requested speed is too fast for the burner or the media.
I tried slowing my burning speed to 8X, but it still gave me the error.
Any suggestions? Is it time for a new drive? If so, what are my options? I have the blue CRT (500mhz) iMac.
Thanks

Since my original post, I have been able to burn a cd, but still most of the time get the error. Why would it work sometimes, and not other times?
Im guessing the drive is going. Can it be replaced? Are there upgrades available for the CRT iMacs ?

HT203164 I tried my first Windows CD burn with iTunes; the burn fails at different points in the burn with error codes 4450 or 4280.

I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.

I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.

4310 error, tried all on the support site and cannot burn any playlists. Ideas?

4310 error, cannot burn any playlists. Tried all on the support site. Ideas??

Yes the profile.ini file has the following info:
[General]
StartWithLastProfile=1
[Profile0]
Name=default
IsRelative=1
Path=Profiles/pjv5m6il.default
As stated before the profile folder is empty.
Peter

Any solution for 4280 error when using Itunes to burn CDs?

Any solution for 4280 error when using Itunes to burn CDs?

http://support.apple.com/kb/TA38101?viewlocale=en_US

HT1349 When I try to burn a cd from my itunes library, I receive Error 4265. Please help.

When I try to burn a cd from my itunes library, I receive Error 4265. Please help.

Hello MAGrice,
Sorry to hear you are not able to burn a CD using iTunes. I found a few articles that troubleshoot this specific issue. I would first start with this article:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
If you are still not able to burn a CD after following the steps in that article, I would continue with this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for posting in the Apple Support Communities.
All the best,
Sheila M.

When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing. I have installed the gear drivers, uninstalled and installed itunes still showing same error. Anything else?

When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.

I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window.

ITunes 2131 burning error - Toshiba Patch

There have been a lot of posts on various support sites about iTunes not burning to CDRs using various models of Toshiba Laptop - instead showing a '2131 Error'.
I've just read on the apple support forum that Toshiba have released a patch to fix this..
Does anyone know if it's available anywhere on the net? Or if any Toshiba Support Techs read this forum - could let me know where on the website can I find the patch?
Thanks for your help,
Rob.

I finally got a hold of someone very helpful on the Toshiba support line, and he said that the order for this driver patch has been put in to the engineering department but he didn't have a date for me as to when the patch will be available online.
He did say that he thought it would be within the month, which is vague but at least something.
He said to just keep an eye on support.toshiba.com. When the patch is ready, it'll be made available on that site. You can subscribe to their update list so that when the patch is made available, it'll notify you via email.
Hope that's at least a little bit helpful!

Burning disc error

i have tried updating drivers and windows (xp sp2), reduced writing speed to 8x, udpated itunes, using cd-r and i STILL get an unknown disc error occurred-cannot be burned. here are diagnostics
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCG-K35(UC)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (6.1.1.48),
UpperFilters: Cdralw2k (6.1.1.48), pwd_2k (6.1.1.48), GEARAspiWDM (2.0.6.1),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
RADEON IGP 345M
ATI MOBILITY RADEON 9200
Connected Device Information:
DiskDrive, photosmart printer card reader (HPH11), Bus Type USB
DiskDrive, MemoryStick or MemoryStickPro Device, Bus Type SSA
DiskDrive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DW-D56A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: SONY DVD RW DW-D56A, Rev PFS3
Audio CD in drive.
Found 15 songs on CD, playing time 58:28 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:38:20
Track 3, start time 08:40:40
Track 4, start time 12:30:63
Track 5, start time 16:19:25
Track 6, start time 20:16:08
Track 7, start time 24:28:00
Track 8, start time 27:49:71
Track 9, start time 31:58:43
Track 10, start time 35:59:36
Track 11, start time 39:54:44
Track 12, start time 43:31:33
Track 13, start time 47:20:59
Track 14, start time 50:42:43
Track 15, start time 54:29:64
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 12 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SONY DVD RW DW-D56A on CDR media at speed 24X.
please help!!

I tried 3 discs, finally getting it to burn.

Help please - iTunes disc burner or software not found... with full troubleshooting details

In iTunes 11.1.3.8 on my Windows 8 HP Laptop, when trying to "Burn Playlist to Disc", I get the Burn Settings window "E: hp DVD A DS8A9SH", then I select MP3 CD and click "Burn", I unfortunately get the dreaded iTunes "disc burner or software not found...". I think this is the second time this has happened (first time I think a simple reboot fixed it), and I assume because iTunes was updated this issue came back again and I cannot burn MP3 cds anymore because of it!
I've followed all steps outlined in this support article "iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install" (http://support.apple.com/kb/TS2308)
Solution 1, no updated firmware was available for dvd drive.
Solution 2, not relevant because those files were not present when I looked for them.
Solution 3, I'm familiar with regedit and did exactly what the step by step instructions told me including rebooting multiple times to completely remove Gear drivers/keys, installing the new Gear driver files with their official setup file "For 32-bit and 64-bit systems:" from http://www.gearsoftware.com/support/drivers.php (and gave another reboot just in case) and opened iTunes at the very end of the entire process.
Still getting the dreaded "disc burner or software not found..." error when trying to burn a playlist to a CD. The weird thing is when I click Burn playlist to a CD, I see the DVD drive "E: in the next prompt which asks for Data CD/MP3 CD, Audio CD.
So I clicked on Help > Run Diagnostics, selected "CD/DVD Drive tests" only and clicked "Next".
Window says "To begin the test, please insert a prerecorded audio cd..." so I did that and clicked "Next".
Under "Choose an optical drive to test:", the drop-down menu only shows "[Choose a Drive]", no other options. Under "Optical drive:" it says "No drive chosen for testing.", and I click the "Next" button.
Here are the diagnostics output I got:
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion g6 Notebook PC
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002AB1700B7C4780
Current user is not an administrator.
The current local date and time is 2014-01-20 18:23:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
I'm extremely confused as to what to do next. I was thinking I should try reinstalling iTunes but I'm not sure that would even work and I'm so paranoid about installing it correctly and referencing the right existing library files that I'd like to see other suggestions first.
Any help from the community or Apple would be tremendously appreciated and I would be glad to do more testing and provide more details. Thanks!

Hi there aaxim,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
-Griff W.

Burn CD - Error 2122 - Please Help!

Updated drivers for CDROM, Graphics card, etc. all this evening. No luck. I get an error out right after it checks the files to be burned - Unknown Error 2122, and it ejects the blank CD.
Stats below...thanks for any advice.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X800 Series \RADEON X800 Series
IDE\DiskMaxtor6B120M0_________________________BANC19J0, Bus Type ATA, Bus Address [2,0]
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [2,0]
IDE\CdRomAOPENDUW1608/ARR_______________________A110___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: AOPEN DUW1608/ARR, Rev A110
Media in drive is blank.
Get drive speed succeeded.
The drive CDRW speeds are: 0.
The drive DVDR speeds are: 0.
The drive DVDRW speeds are: 0.
The last failed audio CD burn had error code 2122(0x0000084a). It happened on drive D: AOPEN DUW1608/ARR on CDR media at speed 0X.

Many of us have posted and experimented and tried everything mentioned here all to no avail in regards to the 2122 error code. And don't let anyone tell you it's YOUR problem--it's not the AOpen drive that's bad-it's that iTunes is NOT working with or doesn't recognize the AOpen burners.... I've gotten a few replies from Apple people and they even say the same thing....
personally I think it's really SAD AND STUPID that this big company can come up with all sorts of new products, pods, nanos etc and yet can't come back and fix the programs for the people that already bought their original products!!!!
HOW HARD can it be to fix a little thing like this??? I don't honestly know -I am not a programmer--but if this many people have complained, wouldn't it be nice if someone would just ADRESS THE PROBLEM??? And then so many of us wouldn't be sitting here fuming, hoping each time they come out with a new upgrade that MAYBE this time it'll work---rather than to be disappointed over and over again and see the same fricking 2122 error....Don't you think fixing something first would be nice instead of just making more newer faster smaller things??

Itunes cd burning 4310 error

Similar Messages

Maybe you are looking for