Itunes close after open

hello,
if i open itunes it says:"itunes doesn't work anymore" and it close the itunes
whad can i do against it?

Assuming you have a variation of iTunes freezes on closing, try the following:
If you are using NOD32 see this article:
http://www.eset.com/support/kb.php?option=com_kb&Itemid=29&page=articles&article id=760
Freeze on closing has also been associated with the bonjour service.
This article tells you about the Bonjour service and how to turn it off as a test:
http://support.apple.com/kb/HT2250?viewlocale=en_US
If you don't need Bonjour and it is causing the problem, you can uninstall it and iTunes will still work except for the features requiring Bonjour.
If that doesn’t work some people have found that uninstalling Apple Mobile Device support works. iTunes works OK without it, but it is required for the iPhone or Touch.

Similar Messages

Preference for Stack NOT to close after opening an app?

I have stacks with multiple apps that I open in sequence, and for the stack to close after every open, is a cork to my workflow.

Restore your iPad:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New
Also, see iTunes- Restoring iOS software.

Illustrator CS2 closes after opening

I'm on iMac 2.16mhz Intel, system 10.4.11. Illustrator CS2 closes immediately after opening. I've followed some of the other threads describing this problem and have trashed the Settings and "com." files mentioned in earlier threads, but it still quits. Illustrator opens, then when I try to open a new document it suddenly quits. There are no error messages given that identify the problem. I want to avoid reinstalling the whole Suite, b/c I've already upgraded some of the apps to CS3. Suggestions?

After a lot of trial and error, I noticed an Enfocus Instant PDF in the Plug-ins folder. After I deleted this, it worked fine. For others having this problem, I also found out that Myriad is the default font for Illustrator CS2. If you don't have it activated, it may cause the same crash problem.

Photoshop cc auto-close after opening.

I am new here with adobe cc 2014. i have tried using my photoshop once but after that i can't use it because it auto-closes after loading the program. I don't know how to fix this problem. Can anyone help me with this?

Good day!
Please read these and proceed accordingly (restoring Preferences might be of special interest):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325
Regards,
Pfaffenbichler

How can main vi detect whether sub-vi closes after opening and running it by user?

Hi I learned more using the call by reference node function.
From what I know is that, after opening and running subvi by means of method nodes.
So after running it, "call by reference" node stays active and there is no flow of data coming out of it till it is closed.
However what if I do not want to use this "call by reference" node as I have multiple sub-vis to choose. So how does the main program detect that any one of sub-vi is closed by user?
regards,
Clement

Hi Clement,
first: you may run the vi with the option "wait until completion" set to false, the call-by-reference node will return promptly.
2nd:
There are many options to signal the completion of the subvi to the main vi: globals (easiest, but may lead to race conditions), LV2-style global, queues. You can even check the status of the subvi (running or not) via vi server.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Voice Memo Bug, closes after opening

When I open voice memos using Iphone version (6.0.1), the voice memo screen is frozen, an then shuts off after about 2 seconds, returning to the main screen. Also, I am noticing that when I sync to my Powerbook(using Itunes (10.5.8) using Itunes (10.6.3) it seems to Sync the same voicememos every time, as if it's not noticing them as being alreay synced. Any help with this is much appreciated. (I already upgraded to Iphone 5 and am about to buy a new powerbook, but I need to retrieve and make sure all my voice memos go with me, as they are integral to my work).
Thanks,

Ok you can also try closing the app by double tapping the home button and tap and hold on V.memos till it dances(lol) and then tap the little (-) that appears above it, hold the sleep/wake button and home button on you device for about 12-15 secs (when you see the apple release) then launch the app again. It may open as expected after this
If that yields nothing you can try backup/restore see ( http://support.apple.com/kb/ht4946 ) to see that iTunes does in fact include V.memos in backups then see ( http://support.apple.com/kb/ts2529 ) to find where your backup is located on the HD and transfer it to another ( friend or family members ) computer that can get the new iTunes and restore to your iPhone 5
I would make sure that you use caution when connecting your device (old one ) To any new computer. iTunes will prompt you before it removes anything but you cannot get click happy or you may lose data. Go to iTunes Preferences on the devices tab to disable automatic syncing if need be

CC 2014 closes after opening/starting a new project.

So i called Adobe about this problem on Friday and after an hour and a half of trying stuff, it was all for not.
we ended up getting disconnected, and i didnt feel like calling them again.
once i open Premiere Pro CC2014 all seems good till i try to open a Project or start a new one,
it just immediately closes with out letting me do anything.
The Custmer Support guy tried:
- Reinstalling it.
- updating my graphics card.
- removing some files.
- making a new user on my computer.
all of which didnt work...i really hope that i can get it up and running soon ><

Are you on Windows or Mac, and exactly which operating system version?

I tunes closes after opening with 10.6

Since I uploaded itunes to 10.6 my laptop (Windows Vista 32GB) my itunes opens but then a windows message opens and says it has to close itunes and then it breaks down. I already removed i tunes and installed it again but it happens again
Hope to get some help here.
Thanks in advance!

Restart computer.
Disconnect your computer from the internet and see if you can open iTunes without crash.
if iTunes does open, go to iTunes Menu Edit > Preferences, "Advanced" tab and click the "Reset Cache" button, OK.
Close iTunes.
Now, use Windows Explorer to delete the contents of Music\iTunes\iTunes Media\Download
You may now re-connect your internet then see if you can open iTunes without issues.

Mozilla automatically closes after opening it

Mozilla closes automatically after 3 seconds when I opened it. Have already checked the firewall settings on my computer and security softwares.

Have you tried to '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link} ?
Some problems occurs when your Internet security program was set to trust the
previous version of Firefox, but no longer recognizes your updated version as
trusted. Now how to fix the problem: To allow Firefox to connect to the Internet
again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

Acrobat Reader closes after opening PDF from an app-v

So we have a problem with reader version 10.1.0.534. In our company we have most applicaties packaged as an app-v take firefox as an example. Now when we try to open a pdf document from firefox Acrobat Reader opens for a second and then closes again right away. Reader itself is installed on Windows 7 x64 (so reader is not packaged with app-v)
We also have this problem with some business applicaties. Is this a known issue for this Reader version? upgrading reader is a big thing (large company) so if there is a fix in the settings it would help us greatly.

Hi Ronnie,
I am not able to reproduce the exact issue. Sequenced the latest build of Firefox on a system already having Reader 10.1.4, so that the reader plugins gets registered. On the sequencer the PDF is opening up in Firefox. The firefox package is then installed on a client system having Reader 10.1.4. When I open any PDF in firefox on the client, I always get the SaveAs dialog.
How are you sequencing Firefox. Are you making any customizations so that browser extensions work well. In this case browser is working within the virtual environment and might not be able to talk to local Reader.

Flash Builder 4.6 closes after opening

I have been using Flash Builder 4.6 for a sometime now to develop some android apps. This morning I try to start it and Flash Builder would open the splash screen and silently close. I have renamed the old work space but it created a new work space and closed again silently. I tried to rename the metadata folder, Flash Builder recreated a new metadata folder and closes again. I tried to follow these http://agileui.blogspot.com/2009/09/flashbuilder-4-silently-fails-while.html instructions but I get an error that
Gumbo.exe is not recognized as an Internal or external command, operable program or batch file.
So guys please help me, it is very frustrating to fight something which gives no errors. I am using windows 7. Thank you in advance

Hey all, I got the answer from this same forum http://support.muse.adobe.com/thread/1022320. Thank you

Illustrator CC closes after opening

Illustartor CC closes upon clicking on "Open File" or even maximizing screen.
I am under pressure, as I have a deadline to meet. I uninstalled Illustrator and re-installed. I keep getting "Complete registration" messages. Sure, where's my registration code? Yes, I followed the instructions, as per Adobe's instruction. Nothing! No codes no verifications...nothing!
Help!

Kustomfiend,
Just to make sure: Are the Verdana and Tahoma font families installed and enabled as TTF?
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Acrobat closes after opening an embedded pdf

Hello
I have created a pdf from Framemaker which in itself has a lot of pdf illustrations.
When I click on one of these illustrations, they open in Acrobat but close the master file.
Can I stop this?

Ok, let's see if I've got it this time.
1. You want to make a PDF from a FrameMaker document.
2. In it are placed PDFs as illustrations.
3. You want it to be a normal, single, self-contained PDF.
4. When you look at the PDF, you see the illustrations on screen where you want them.
5. But when you click on those illustrations it closes the PDF and instead opens the illustration PDF that you started with (and closes the PDF you made).
6. And this illustration PDF won't even be on the computers where the end user is looking at the PDF.
Is this right? Especially step 5, is it definitely opening the actual picture file you placed? Or a different one with the picture in it?

ITunes closes after the iPod is conected and views an error message

Now firstly yesterday i had a crash caused by a dealay in processes and after that my i tunes library went blank, luckuly my music was safe and soon i restored it. After i connected the i pod it asked me to reSync the ipod becuase it appeared to be tied to another iTunes library. After i did that the Itunes closed and gave an error message saying that it has unsuspectably closed. After i got it up and running i connected my iPod again which made it think for a while after which it gave the exact same error message. I used the 5 steps which did not realy help because i cant get my iTunes and iPod running at the same time. I decieded to probe the problem first by reinstaling the iTunes which did not have any effect whatsoever on the system or the problem. A thought came to me that the problem might be in the iPod itself and that i should try somehow to reset it to the default settings, because my itunes would not work i got my pc to reset the ipod to the defaults. After which the iTunes did not like my iPod and got the exactly the same error message again. Seemingly i had already renamed and tied my iPod to another library so that would mean that the problem is in the iTunes or the computer itself. Thus i tried to reinstall the iTunes before i tried again but this time insted of "Renewing" it wanted to completly wipe out iTunes to get a fresh start. So i ask you if threr is a way to fix this or atleast tell me how to completly wipe it out!

It sounds like it might be something with your iPod - You might want to post this question to the iPod forum & see if you get some help there.

Skype closes after opening

every time i go to open up skype it closes out immediately afterwards and says that i've been signed out? it worked fine yesterday... please help

http://heartbeat.skype.com/2014/09/i_keep_getting_signed_out.html Open your Skype account settings page: https://secure.skype.com/portal/account/settings If your Skype account is linked with Microsoft account, then try to unlink them. https://support.skype.com/en/faq/FA12211/how-do-i-unlink-my-skype-and-microsoft-or-facebook-accounts

Itunes close after open

Similar Messages

Maybe you are looking for