Itunes compatability with digidesign 003 audio interface

I have a Macbook Pro and Itunes my itunes previously would work with my digidesign 003 interface and one day it just would not be recognized, when I go to sound preferences in the mac i dont see the interface anymore now i also have a digidesign Mbox mini that always shows up and works perfectly, can anyone help me with this problem......Thanks

Yes the 003 works fine with Logic using the Core Audio driver available from the digidesign website (or that comes with the 003 when you buy it). The macbook pro will work just fine with that interface. I use mine with a Macbook Pro 2.16GHZ aluminium and a Mac Pro 8 core.
And works fine with OSX 10.5.6.

Similar Messages

Is Apple Logic Studio 8 compatible with Digidesign mbox audio interfaces

I have a MacBook Pro 2.4GHz Intel Core 2 Duo
And I have a Mbox 1
I want to purchase Logic Studio 8, but am not sure if the mbox 1 audio interface is compatible with Logic Studio 8
Have heard rumours it doesn't work with mbox2 so i'm unsure about compatibility with mobox1
Does anyone know the score with this, please?
Many thanks
BLS

You can go to the Digidesign website and download their CoreAudio software for digidesign soundcards. You should also be able to check if it is compatible with your MBox1. I have a feeling that it is only MBox 2 and above compatible, but you should check to be sure.

HT1923 is itunes compatable with Windows 8 ????

is iTunes compatable with Windows 8 ??? if so how do I update my "Apple ID" on my iphone 5??? when I access ITunes to sync/update my phone it displays an old Apple ID ???

Hi frederick6642,
Thanks for visiting Apple Support Communities.
You can find the Windows system requirements on the iTunes download page:
http://www.apple.com/itunes/download/
See this article for the steps to change the iTunes account on your iPhone:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
All the best,
Jeremy

Is itunes compatable with windows 8

I just purchased a new PC with Windows 8. Is itunes compatable with it?

No.
It may or may not install and run but Windows 8 is not yet officially supported.
iTunes 11 hould be released any day now.
iTunes 10.7
"Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista or Windows 7
64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer
250MB of available disk space
Broadband Internet connection to use the iTunes Store"

Problem with iTunes compatability with iMovie and iPhoto

I purchased some music from the iTunes music store and wanted to use that music in a homemade DVD I made. I also have tried using the purchased music when I play a slideshow in iPhoto. In both instances, an error window popped up saying that I needed to launch iTunes and authorize the computer to play the song... Well I bougth the music on the same computer and it is authorized. I typed in the authorization anyways and then after that iMovie and iPhoto both pop up with an error saying that it can't use the file.
Thinking it might just be one song file... I have tried this with many purchased song. I have had the same problem with all of the purchased songs I've tried.
Are some purchased songs not compatable with the iLife applications? How can I fix this problem? I'm running iLife 05 and I have installed all of the updates, including the most recent...
iTunes 6.0.2
iPhoto 5.0.4
iMovie HD 5.0.2

Do you need to update Quicktime as well?

I just got my macbook pro 11 have problems with setting up audio interfaces!! plz help me

So here it goes! i properly installed the drivers for my Emu tracker pre usb and for my saffire pro 40 (firewire) . Both audio interfaces show up in the system profiler under their respective category (firewire and usb bus) But i cant get them to apear in system preferences sound menu neither on logic!! my saffire pro doesnt even lock with the mix control software provided! what can be the problem ? how can i solve it ? I really need your help!!
(everything works perfect on my i mac 27" 10.6.2 snow leopard).

I doubt you will have any virus, must never say never
Free for Home use
Sophos
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition.aspx
also free from app store Clam XAV
http://www.usatoday.com/story/tech/columnist/komando/2013/02/14/tech-myths-mac-s oftware-megapixels-camera/1910521/
Your Battery will not last long if you keep it on full brightness.
see this read
https://discussions.apple.com/thread/964075?start=0&tstart=0
http://support.apple.com/kb/PH3738
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Battery%2095%25
Open LaunchPad/Other/Activity Monitor/CPU
and check if any of your processes are high% CPU if so select it and press the Red Quit process Button
Mac101 may assist you
http://www.apple.com/support/macbasics/

Recently I have not been able to sync itunes radio with my wireless audio player. What happened?

I cannot get itunes radio to sync with my wireless audio system. It was working until recently and now only downloaded music will play. Is this a function of the system or did itunes do something?

Hi,
Here is a suggestion from Carolyn Samit that worked for this problem with iPads - see if following her instructions clears up the problem with your iPhone:
Launch iTunes with your iPhone connected to your Mac. Make sure the iPad is listed under Devices on the left side of the iTunes window.
From your iTunes menu bar click iTunes / Preferences then select the Devices tab.
If there is more then one backup available, delete all but one.
Restart your iPhone. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
Restart your Mac.
Try to sync now.
Hope this works for you!
Cheers,
GB

Input problem with UCA202 usb audio interface and Garageband

Hello, i've tried to connect my guitar in my UCA202 Bheringer audio Interface, and the sound goes fine for few minutes and after i get a noisy distorsioned sound with a big delay...
I dont know if the problem comes from the MacBook, the sound card, Garageband or else...
it come only from input guitar device.
Thanks to help.
Alex

There are other posts concerning this problem. I also have a UCA202 and a Peavey PV10 USB mixer. It seams that anything using the 10.4.11 or 10.5.1 mac USB drivers are having this issue. I had to go back to 10.4.10 to resolve at this point. My recordings are clean when going back. There is 10.5.2 comming soon and it is not known if this will fix it. Check this thread for updates.
http://discussions.apple.com/message.jspa?messageID=5964474#5964474

LOGIC PRO 8 with motu 828mkII audio interface

I have bought a MOTU 828mkII Firewire and I am using it with a Mac Pro Intel
dual core v. 10.4.10 running Logic Pro 8.
My mixer is a Yamaha DM-1000. I have a problem with audio.
I have the mac going into the 828 via a firewire cable, then out of the 828 to
the mixer using 8 channel adat lightpipe. All devices have the same 48k sampling
rate but I can not hear a logic virtual instrument, like a piano, using the adat
lightpipe interface. If I use the analog "main outs" on the 828 I have audio,
but nothing comes thru the adat output. If I use another application besides Logic with the same setup, the adat connection works fine. This leads me to think the problem has to be in Logic and how it interfaces with the Motu 828mkII. I have read all manuals and can't figure
out what's wrong. Any suggestions?
Thank you,
Pierre.

Generally, outputs on audio interfaces are discreetly named. So, if your master output is set to Output 1&2, that might refer to your analog outputs. If you want to send the a different set outputs, say, a stereo pair via ADAT, you might need to send to outputs 5&6, instead of 1&2.

Volume control when using front row with an external audio interface

Hi,
I got my macbook last week, and so far, I love it. But I've got a small gripe with FrontRow - in my room at college, I have my macbook plugged into an oldish Tascam US-122, which I use a lot for recording. The Tascam is connected to my expensive active speakers, and ideally, I'd like to be able to play back via FrontRow to the Tascam, to the speakers, while retaining remote control. This isn't a problem for selecting Photos/Videos/Music etc, but the problem arises when I want to change the volume - the remote simply controls the volume of the macbook's internal speakers, not affecting the output of the Tascam.
I know I could just connect the speakers via the headphone output, but that would mean more cables, and more chopping and changing system preferences to suit whether I'm making music or just listening.
*So - is there any way at all that I can make the macbook's global volume control (using the volume hotkeys and remote) affect the signal its sending (via USB) to the Tascam?* I know its not impossible, because until recently I used it with a PC running XP, and that allowed me to use the volume control app to boost or cut the Tascam's volume. Perhaps its an issue with the Tascam's OSX driver?
The Tascam has its own physical volume knob, so its not like I'm stuck listening at deafening or very quiet volumes, and I know this sounds like an issue with my laziness rather than FrontRow or the macbook, but surely it defeats the point of FrontRow if I have to walk across the room every time I want to turn the tunes up or down?!
Any help would be much appreciated!
Cheers,
Thom Bishop

hmm, yeah, thats kinda what i suspected - i reckon this is to do with the way the frontrow interface is set up, but theres no way (as far as i can see) to make everything pass through the main system stereo channel BEFORE going to an external audio interface... which is COMPLETELY bizarre, since system sounds/alerts get passed to the audio interface fine.
and no, i very much doubt whether ANY external audio interface would respond to apple remote (gap in the market, perhaps?).
this would be a fairly simple problem to solve, if only apple were aware of it... of course, i COULD try getting to grips with audio units and seeing if i couldnt fix it myself, but ive frankly not got the time to learn how that works! how can i make apple aware of this issue?? are they already aware??

How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

Go into the PPRO Preferences under Audio... In there select the TASCAM interface...

Audio input setup with a USB audio interface

When i plug my USB audio interface into the USB port, GB gives me a message that it has been detected, and it shows up in the audio input preferences.
But it doesn't seem to be listening. Signals light up on the interface when i speak into the mike, but not on my GB.
I also switched to the device I'm using in my Mac input sound preferences.
Hints, anyone?

Nothing - it's a new project. Thought maybe I ought to get the input device working before starting.

How to record in dual-mono with 2 channel audio interface?

I'm using an iPad 3 with an ART 2-channel usb/mixer interace. I use the Camera app for video recording and the audio is routed thru the interface. Works fine except that I can't seem to figure out how to change the default setting of the iPad/Camera app so that it will record the audio in dual mono. Right now it only records in stereo, with the 2 channels panned hard left and right. Recording vocal and guitar with the dedicated 2 mics/channels makes for a very wide and un-natural stereo image.
Can Apple or someone help me figure this out?
Thanks!

I could be wrong, but I don't believe the Camera app offers a dual-mono option. You'll probably need to look for another app, perhaps a third-party app, that can do this.
Regards.

Itunes compatibility with the new Netbooks

I just bought a Samsung Netbook with the 1.6 Ghz processor, 1 GB RAM and 250 GB harddrive, installing ITunes appears to finish, but the program is no where to be found. Is there a compatibility issue with ITunes and NetBooks?
Yesdog

Not that I've heard about. Mostly itunes performance on a netbook won't be very good, but it should install.
Did you right-click install as an admin? Is the itunes.exe showing in Taxs Manager > Processes?

New 27" imac and I'm having trouble with my firewire audio interface

I was using my IO 26 with my old macbook (OS10.4) for the past 3(?) years with no trouble, but now I can't get it to work with my new quadcore imac. I installed the new drivers (for OS 10.6), and I get the yellow/orange light that shows a firewire connection, but audio does not flow to/from the computer. I don't see any audio in the output meters even though I have selected the IO26 as the output device. If anyone knows anything that might solve this, please let me know.
Thanks.

I guess that's possible. Could you recommend a quality 400to800 adapter?
This cable is what I'm using to connect the interface: http://www.bhphotovideo.com/c/product/564904-REG/CablesToGo50705_50705_IEEE_1394B_Cable_FireWire.html
That cable worked alright to connect my old computer in order to transfer files.
Also, I think I have an old FW400 external drive laying around somewhere. I could use that to as a test.

Itunes compatability with digidesign 003 audio interface

Similar Messages

Maybe you are looking for