ITunes Connect, Version Number, Bundle Version

ios ,iTunes Connect,Version Number, Bundle Version
I have an app at iTunes Connect Version 3.3 - status has been Ready for Sale for a long time.
I have a new version with major changes of my app that is ready for release.
It has Bundle Version 4.6.0. It is validated and I am ready to distribute, BUT
at iTunes for the new version number I entered "4.6". My bad, I now
know that I made a mistake and the the "4.6" will appear to the public as the
new version number. I want the public to see "4.0" as the version number.
How can I do this? I see no way to cancel the current "prepare for submission" data.
Am I simply stuck with this jump from V:3.3 to V:4.6
Many Thanks for reading this, Mark

I will answer this myself. The existing app V:3.3 at iTunes Connect was put up with an Info.plist Bundle Version of 4.5.1. I am force by the current demands of iTunes Connect, as I see it, to go higher than 4.5.1 , on the upcoming release. The interface does allow me to go to a Version 4.0 at iTunes but when I do so , the app will not be validated in Organizer, because of the discrepancy between Info.plist BundleID and iTunes Version. It appears to me that there has been a change made at iTunes Connect that I missed. Earlier a "public" Version of 3.3 at iTunes could exist with an info.plist Bundle Version 4.5. but now 4.0 at iTunes can not be used after the move to a Info.plist Bundle Version reaches 4.6.0. I have to move to an iTunes Version number of 4.6.0 when I really want 4.0.0. I understand the demand for ever increasing numbers in Version and Bundle Version, but IMHO , I should be permitted to use 4.0.0 !

Similar Messages

Table For Purchase Order Version Number and Version Created Date

Dear Sir,
Whenever we make any change in Purchase Order , then a new Version Number along with Created Date is assigned . In Me23n the Version Number and It's Created date is also displayed ( at PO Header Level) .
We request you to kindly guide us as which Table is required to be reffered to get the Version Number and Version Created date for the Purchase Order .
With Thanks and Rgds
Sonia

Hi
Check in EKKO - Purchase order header
EKPO - Purchase order item
CDHDR
CHPOS
Regards
Ram
Edited by: Parasuram M on Sep 16, 2009 11:59 AM

Itunes Connect, one app, one version, different builds (not showing up)

I rejected my own binary in ITC, fixed bug that i noticed and then reuploaded with a different build and version number, however one the main app page I can only see the old upload. In the testing area I can see the new upload.
My question is, Which version will be reviewed? New or Old.
(Not sure if I am missing a step)
Thanks

Thanks Limnos for taking your time with this.
Here's what happened
1) All my Music was stored on a TC 2.0TB WD hard disk which I shared with my partner.
2) All music in iTunes were mapped to this specific location and only this location.
3) When opening the folder on the TC only a fraction of the actual music folders were available to see (i.e. Artist The Wonder Stuff folder was present and in this folder only 2 album folders were found when in fact there should have been 12)
4) All songs in iTunes did play correctly so if i wanted to listen to one of the The Wonder Stuff songs they would all play (even albums that did not show up in the artist folder from above).
5) When clicking show file in finder, the file would show up and then again when going back manually into the folder as above.
6) TC dies on me. No more power.
7) Took out the HDD and put it in a cradle to extract the songs.
8) Right click on the folder shows there are about 35'000 files which sounds right BUT only a fraction of these can be seen.
9) Now I cannot do the show in finder through iTunes as the directory no longer exists (the TC died and I threw it away, except for the HDD).
10) The files are on the HDD but I cannot see but a fraction of them when opening the folder...
I hope this makes it a little more clear.
I honesty do not know what to do as I know the files are there but cannot see them and thus map them in iTunes... :-(

HT1535 i have laptop. i have i have the lates version of itunes connected to my windows version. im trying to sync my ipods. when i plug them in they do not so up on my itunes screen. can u help...

I need help. im trying connect my ipod. does not show on my screen, i think i activitde the cloud show it not showing the ipod on the itunes screen. i have a windows laptop. can u please help. thanks..

Hello there, killergary.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Change application name in itunes connect

Sir
How can i change application name in itunes connect without using add version option.
Regards,
M.Muthukumar

Keeping in mush-mind that rumors here get squashed like slugs on an expressway - and that visibility in the app store is key...
Apple has supposedly been looking at redoing categories in the app store in an effort to better help customers browse titles/topics more logically...and to help large commercial clients with more of the general spotlight. As things stand now, it is supposedly less likely for prominent commercial apps to be spotted while floating in a sea of non-commercial (read potentially frivolous) apps.
Another motive may be that some devs/sellers intentionally mis-categorize an app just to be able to participate (read 'sell') in a group where the outright competition is lower and general visibility can be easier to attain.
Also, with the recent change that now provides for content rating by the author, Apple may be ready to apply those ratings as part of an overall category change as well...an example would be where 'Honda Civic Summer Beach Girls Slideshow' is part of the general 'Photography' category, it may instead be moved to a viewer restricted 'Entertainment' category.

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

Hello i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another

hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining . if there is any solution share with me and i be very thankfulness of you.tanks again

It is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

Trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

iTunes version 10.7 requires at least Mac OS X version 10.6.8 if you're running a Mac, or Windows XP Service Pack 2 or later if you're running Windows.
Is your computer up-to-date enough for iTunes 10.7?

Where is the EXACT version number shown? Where is the menu link to the Help file? Why is there no scroll bar? The new iTunes is terrible in more ways than I can list... how do I switch back to version 10?

The newest iTunes version has no Help option. Why? And, no ability to find out the version number.
The new iTunes, when in album view in Windows 7, has NO SCROLLBARS, so it is impossible to scroll the albums. Why?
Answer these questions, as I am an AAPL shareholder and I am NOT happy with these and other changes you've made to iTunes.

The newest iTunes version has no Help option. Why? And, no ability to find out the version number.
You may need to bring up your Menu Bar to see the Help menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Once you've got your Help menu showing, go "Help > About iTunes" and wait for the version number to scroll up from the bottom of the screen, as per the previous versions.

My 2nd generation iPod touch will not connect with the newest version of iTunes (December 2012 update). My computer(windows7) says the device is connected when i plug it in, but it will not show up in iTunes. Can anyone help?

As said in the question, my ipod touch will not connect to the newest version of itunes. When I plug it in, my compter recognizes that a device has been connected, yet it will not show up in itunes. I didn't have this problem until I just updated to the new itunes. Someone help please!

iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
It still could be cable or contacts in the iPod since different contacts/conductor are used for charging and data

Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
You can download iTunes for your computer here.
http://www.apple.com/itunes/

Error message is showing while connecting to itunes - "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes - Pls Help

I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
"This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes".
i already installed 64bit version. but not connecting my iphone with itunes
PLEASE HELP.!!!!
<Personal Information Edited by Host>

Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

HT1329 I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists do not appear on my new PC when I open ITunes. Any suggestions?

I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists from my old PC do not appear on my new PC when I open ITunes. Any suggestions?

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

I want to update to iOS 7 when it comes out via iTunes. I gather that I will require iTunes 11.1 to do so, but I recently updated my version (today) to version 11.0.5. Will I be OK or wait until I have a Wi-Fi connection and do it then?

I want to update to iOS 7 when it comes out via iTunes. I gather that I will require iTunes 11.1 to do so, but I recently updated my version (today) to version 11.0.5. Will I be OK or wait until I have a Wi-Fi connection and do it then?

More than likely, the new version of itunes will be released later today in conjunction with iOS 7. But, yes, you can update the phone via WiFi. Make sure to set up icloud and do a back up first.

What is the 2.0 version number if downloaded directly from iTunes?

If you are one of the lucky ones to get the download from iTunes, can you please tell me what the version number is? Just fire up your phone and go to settings/about. Scroll down and you will see Version 2.0 (xxxxx).
I am one of those that probably voided its warranty by downloading manually. Mine says 2.0 (54347). Just wondering if we are getting the same. I was lucky and it all went well but I started to notice a few things. Like after using 3-4 apps, I have to reboot the entire phone since I can't start new ones. Also, the keyboard typing gets a bit slow after a while.

Thanks for the reply... Besides the slight difference in file name, yesterday manual download version was 230,427KB. I saw someone say iTunes version was 215 and on another board, I saw 218. Do you know the size of the one you got through iTunes?
I am sure there is a difference somewhere. There is always a price to pay for being inpatient.

ITunes Connect, Version Number, Bundle Version

Similar Messages

Maybe you are looking for