ITunes connection log file?

My iPad has been stolen, and I need to find the MAC address to report to my university's IT department. I've tried all sorts of measures, and my latest gambit is to see if iTunes keeps a log of the devices that were connected to it.
I read somewhere that the interface between iTunes and the iDevices is regular TCP/IP, so I was wondering if there is any place where the log file is stored? Perhaps an iTunes log file? Or an access log for the USB interface?

Similar Messages

Access Connection log file, no clear structure, behavior criptic

I am troubleshooting an issue with Access Connection ver. 4.42 executing over a Lenovo Thinkpad T61
I enable the log, using the login tab, for the Diagnostic option in the Tools Menu.
The log generated is in html format, but the contents its very dificult to understand.
I think the developer put this for debuging, and they know, what mean every entry ( I think).
someone know the meaning of the entries in the log file AcconAdvanced.html ???
Thanks in advance.
filmancco

Hmm.. that is a bit strange... The 3945 card in the T60 and the 4965 card use the same driver, so you'd think the problem should be showing on both systems.
When you switch to another profile and you get the pop-up window showing progress, at what point of it do you get a red X?
Also, if you click "help me fix this" what error is listing?
I presume this is with v4.42 of AC? Might want to make sure that also have the latest hotkeys and power management driver if don't have them already...
Hotkeys:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68000
Power Management driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4GXPEG
Don't use the driver from Intel's site, Access Connections needs to use the Lenovo driver in order to function properly.
But, you could uninstall Access Connections and the Lenovo version of the driver and download/install the Intel driver with their PROSet application to see if it have the same behavior. That would help say if it's an AC problem or a driver issue.
As for the disconnecting problem, can try changing the Power Management and Roaming Aggressiveness of the card.
Edit each profile under Access Connections and on the Wireless Settings page, go into the Settings for Advanced Configuration. Set the Power Save Mode to Low (best network performance).
Then open Device Manager and open the properties of the Intel wireless card. Go to the Advanced tab and change these two settings.
Power Management: Uncheck Use default value and move the slider all the way to the right to Highest.
Roaming Aggressiveness: Uncheck Use default value and move the slider all the way to the left to Lowest. Click Ok and exit. Then reboot the system.
You may need to tweak the Aggressive Roaming setting to a left of middle setting if you find yourself not roaming soon enough.
Try that and see if it helps....
Note from Moderator: Converted links.
Message Edited by nonny on 12-04-2007 08:14 AM

Ipod touch 4g is in recovery mode, whey try to restore it thorugh iTunes, I get error 40 below is log file....

pls help me to fix this problem.
log file...
2014-02-24 14:04:20.396 [1192:14d4]: restore library built Jan 7 2014 at 02:02:33
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: iTunes 11.1.4.62
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Software payload version: 10B500
2014-02-24 14:04:20.397 [1192:14d4]: iTunes: Using iTunes state machine
2014-02-24 14:12:16.573 [1192:10d0]: iTunes: Specifying UOI boot image
2014-02-24 14:12:16.774 [1192:10d0]: requested restore behavior: Erase
2014-02-24 14:12:16.774 [1192:10d0]: requested variant: Erase
2014-02-24 14:12:16.997 [1192:10d0]: *** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
2014-02-24 14:12:17.390 [1192:10d0]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
2014-02-24 14:12:22.429 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 063BE060 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 063BFF08 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 063BECC0 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 063BFDE8 [720A907C]>{length = 20, capacity = 20, bytes = 0x947ce636269ab8f999739b5a72d820c70102912a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 063BEC78 [720A907C]>{length = 20, capacity = 20, bytes = 0x86aa6a33d416b8183226d0b9188df879c0666e8a}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 063BF890 [720A907C]>{length = 20, capacity = 20, bytes = 0xd1534e338ae80b9b4addae3c77a83a6186fe75ab}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 063BFE78 [720A907C]>{length = 20, capacity = 20, bytes = 0x7788d3144dbc9f173ff12878570d11c0cdff4e35}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 063BF338 [720A907C]>{length = 20, capacity = 20, bytes = 0x79be5d2f2f7054aa2d7bdd5b66e3a0eca07a725b}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 063BFE30 [720A907C]>{length = 20, capacity = 20, bytes = 0x1abed33b398f978c681b346ea167eb26eaf3b38e}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 063BDF88 [720A907C]>{length = 20, capacity = 20, bytes = 0x21abcad73c393fb9d197b34403d52ec82643ffc4}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 063BEC30 [720A907C]>{length = 20, capacity = 20, bytes = 0xfa0dc3003aeb828feda55a4ffb8027d10f054bce}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 063BFDA0 [720A907C]>{length = 20, capacity = 20, bytes = 0x8b90263d2d4d916029bb28321fe214b7056dab33}"
2014-02-24 14:12:22.430 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 063BFD58 [720A907C]>{length = 20, capacity = 20, bytes = 0xc504724a963b954e32478d6920311a32baca15b9}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging" Digest = "<CFData 063BFC38 [720A907C]>{length = 20, capacity = 20, bytes = 0x808a3980c646bd6d87921c9dba79c54a7759395a}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 063BED08 [720A907C]>{length = 20, capacity = 20, bytes = 0x3ced32535b4f03e3cdd4f55d4d29e16bdf6b3536}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 063BF578 [720A907C]>{length = 20, capacity = 20, bytes = 0x62d392da7901734968084e882ab8d687bc917be8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 063BFBA8 [720A907C]>{length = 20, capacity = 20, bytes = 0x059a392a0e7dccbfdc2f918cd59f4f5b4b140df8}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 063BF410 [720A907C]>{length = 20, capacity = 20, bytes = 0x421d229710239b268c3a2544a4fb161a3d6288aa}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 063BF3C8 [720A907C]>{length = 20, capacity = 20, bytes = 0xa01b8483c6d2f2355569951d0e72df454f4432a7}"
2014-02-24 14:12:22.431 [1192:10d0]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 063C3700 [720A907C]>{length = 20, capacity = 20, bytes = 0x9738ff132ae5b77833acdf2aa72af1558c4734d2}
2014-02-24 14:12:22.431 [1192:10d0]: amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
2014-02-24 14:12:22.685 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-request.plist
2014-02-24 14:12:24.350 [1192:10d0]: amai: tss_submit_job: HttpQueryInfo returned 200
2014-02-24 14:12:25.032 [1192:10d0]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
2014-02-24 14:12:25.078 [1192:10d0]: amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/RAKESH~1/AppData/Local/Temp/Per76A5.tmp/amai/debug/ts s-response.plist
2014-02-24 14:12:26.597 [1192:10d0]: amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
2014-02-24 14:12:27.466 [1192:3a4]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:27.467 [1192:3a4]: iBoot build-style = RELEASE
2014-02-24 14:12:27.468 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.469 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.471 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.472 [1192:3a4]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:27.473 [1192:3a4]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:27.474 [1192:3a4]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:27.475 [1192:3a4]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:27.476 [1192:3a4]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:27.477 [1192:3a4]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:27.477 [1192:3a4]: radio-error not set
2014-02-24 14:12:27.478 [1192:3a4]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:27.480 [1192:3a4]: <Recovery Mode Device 025E0430>: production fused device
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.481 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:27.482 [1192:3a4]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:27.482 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 4 progress -1
2014-02-24 14:12:30.448 [1192:3a4]: bootstrapping restore with iBEC
2014-02-24 14:12:30.449 [1192:3a4]: requested restore behavior: Erase
2014-02-24 14:12:30.463 [1192:3a4]: <Recovery Mode Device 025E0430>: operation 31 progress -1
2014-02-24 14:12:31.463 [1192:3a4]: <Recovery Mode Device 025E0430>: Recovery mode succeeded
2014-02-24 14:12:37.516 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:12:37.521 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:37.590 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.622 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.651 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.664 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.664 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, new device
2014-02-24 14:12:37.665 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:37.692 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.716 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.739 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 1
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]:                                IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:12:37.869 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 1, connected: 0
2014-02-24 14:12:37.869 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:12:37.870 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:37.870 [1192:17a4]:                             IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.874 [1192:1558]: Recovery mode device disconnected
2014-02-24 14:12:37.877 [1192:1558]: Recovery mode device connected
2014-02-24 14:12:37.877 [1192:1558]: Found new device.
2014-02-24 14:12:37.880 [1192:1450]: _AMRecoveryModeDeviceFinalize: 025E0430
2014-02-24 14:12:37.881 [1192:14d4]: iTunes: SCEP 2
2014-02-24 14:12:37.969 [1192:544]: iBoot build-version = iBoot-1537.9.55
2014-02-24 14:12:37.970 [1192:544]: iBoot build-style = RELEASE
2014-02-24 14:12:37.970 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 44 progress -1
2014-02-24 14:12:37.970 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:37.970 [1192:544]: requested variant: Erase
2014-02-24 14:12:37.971 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:12:38.674 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:12:38.675 [1192:544]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:12:38.675 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.676 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.677 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:38.677 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:38.677 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:38.677 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:38.677 [1192:544]: command device request for 'getenv radio-error' failed: 2008
2014-02-24 14:12:38.677 [1192:544]: radio-error not set
2014-02-24 14:12:38.677 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:38.678 [1192:544]: <Recovery Mode Device 025DFDD0>: production fused device
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.678 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:38.679 [1192:544]: interface has 1 endpoints, file pipe = 1
2014-02-24 14:12:38.679 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 4 progress -1
2014-02-24 14:12:41.655 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:41.656 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:41.656 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:41.656 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.659 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.661 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.664 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:41.666 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 42 progress -1
2014-02-24 14:12:41.666 [1192:544]: requested restore behavior: Erase
2014-02-24 14:12:41.669 [1192:544]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:12:42.160 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:12:42.163 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:42.231 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.285 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.340 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.364 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:42.367 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:42.432 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.487 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.541 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:42.566 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:42.567 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:42.706 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:42.706 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:42.706 [1192:544]: command device request for 'getenv ramdisk-size' failed: 2008
2014-02-24 14:12:42.707 [1192:544]: Unable to query iBoot ramdisk-size. Libusbrestore error : 67108864
2014-02-24 14:12:42.707 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 5 progress -1
2014-02-24 14:12:43.100 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:43.100 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:43.100 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: GetOverlappedResult failed
2014-02-24 14:12:43.102 [1192:544]: AMDeviceIoControl: pipe stall
2014-02-24 14:12:43.102 [1192:544]: USBControlTransfer: error 31, usbd status c0000004
2014-02-24 14:12:43.102 [1192:544]: command device request for 'getenv ramdisk-delay' failed: 2008
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.141 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:44.187 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.227 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.260 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.272 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.272 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.361 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:44.389 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.412 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.435 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:12:44.446 [1192:17a4]: AppleDevice::SetNotification: NONE, interface type: 0, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:44.446 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 0, connected: 1
2014-02-24 14:12:45.138 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 6 progress -1
2014-02-24 14:12:46.148 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 7 progress -1
2014-02-24 14:12:46.482 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 8 progress -1
2014-02-24 14:12:46.483 [1192:544]: unable to open device_map.txt: No such file or directory
2014-02-24 14:12:46.484 [1192:544]: found device map entry for 0x00008930 0x00000008. boardConfig=n81ap platform=s5l8930x
2014-02-24 14:12:46.484 [1192:544]: _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: operation 9 progress -1
2014-02-24 14:12:46.485 [1192:544]: <Recovery Mode Device 025DFDD0>: Recovery mode succeeded
2014-02-24 14:12:48.195 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4
2014-02-24 14:12:48.200 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.201 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 1
2014-02-24 14:12:48.201 [1192:17a4]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#3702aee 4, inst: 0x10bf1a50
2014-02-24 14:12:48.201 [1192:17a4]:                                IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4, inst: 0x10bf1a50
2014-02-24 14:12:48.210 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.211 [1192:1450]: Recovery mode device disconnected
2014-02-24 14:12:48.214 [1192:1558]: _AMRecoveryModeDeviceFinalize: 025DFDD0
2014-02-24 14:12:48.382 [1192:17a4]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#3702aee4
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 2, connected: 0
2014-02-24 14:12:48.384 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:13:00.982 [1192:cfc]: Mux version 3 event happened
2014-02-24 14:13:00.982 [1192:cfc]: Passing control to mux version 2 handler
2014-02-24 14:13:00.983 [1192:cfc]: Muxed mode device connected
2014-02-24 14:13:01.049 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.055 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.266 [1192:1664]: received kAMDeviceAttached action, device id E80CE514C875BC07 (0641AB88), AFC error 0XE8000028
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Restore-mode device appeared, device 0641AB88
2014-02-24 14:13:01.266 [1192:1664]: iTunes: Creating restore mode device with usbMuxDeviceID 0X1
2014-02-24 14:13:01.267 [1192:1664]: <Restore Device 06F59780>: operation 3 progress -1
2014-02-24 14:13:01.272 [1192:1664]: <Restore Device 06F59780>: operation 4 progress -1
2014-02-24 14:13:01.297 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.300 [1192:1664]: Supports value queries: 1
2014-02-24 14:13:01.314 [1192:e7c]: value query for 'SerialNumber' returned 'C3VDMTBQDCP9'
2014-02-24 14:13:01.314 [1192:e7c]: <Restore Device 0641A9E8>: operation 3 progress -1
2014-02-24 14:13:01.321 [1192:e7c]: <Restore Device 0641A9E8>: operation 4 progress -1
2014-02-24 14:13:01.326 [1192:e7c]: Supports value queries: 1
2014-02-24 14:13:01.336 [1192:1154]: Found new device
2014-02-24 14:13:01.368 [1192:f44]: <Restore Device 06F59780>: operation 44 progress -1
2014-02-24 14:13:01.368 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:01.368 [1192:f44]: requested variant: Erase
2014-02-24 14:13:01.372 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreKernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "RestoreRamDisk" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "KernelCache" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
2014-02-24 14:13:02.146 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
2014-02-24 14:13:02.147 [1192:f44]: amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
2014-02-24 14:13:02.147 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.149 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.166 [1192:f44]: fixed TcpWindowSize (65535) can cause restore failure if too large
2014-02-24 14:13:02.238 [1192:f44]: device did not return saved USB log
2014-02-24 14:13:02.238 [1192:f44]: device had saved panic logs: panic(cpu 0 caller 0x80632111): "partition scheme present; however, no partition devices were created"@/SourceCache/IOFlashStorage/IOFlashStorage-558.4/IOFlashPartitionSchem e.cpp:267
Debugger message: panic
OS version: 9A405
Kernel version: Darwin Kernel Version 11.0.0: Tue Nov 1 20:33:58 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8930X
iBoot version: iBoot-1219.43.32
secure boot?: YES
Paniclog version: 1
Epoch Time:        sec       usec
Boot    : 0x526e9493 0x00000000
Sleep   : 0x00000000 0x00000000
Wake    : 0x00000000 0x00000000
Calendar: 0x526e94a6 0x000e2944
Task 0xc0562d20: 2451 pages, 81 threads: pid 0: kernel_task
          thread 0xc064b230
                    kernel backtrace: cb643e2c
                      lr: 0x8007cc6b fp: 0xcb643e58
                      lr: 0x8007d26f fp: 0xcb643e88
                      lr: 0x80016391 fp: 0xcb643ea0
                      lr: 0x80632111 fp: 0xcb643ecc
                      lr: 0x806323b9 fp: 0xcb643ee0
                      lr: 0x8020dd3b fp: 0xcb643f18
                      lr: 0x8020db31 fp: 0xcb643f5c
                      lr: 0x8020e509 fp: 0xcb643f80
                      lr: 0x8020e2e5 fp: 0xcb643fa8
                      lr: 0x8007b37c fp: 0x00000000
Task 0xc0562ac0: 283 pages, 3 threads: pid 1: launchd
Task 0xc0562860: 515 pages, 1 threads: pid 2: launchctl
Task 0xc0562600: 690 pages, 1 threads: pid 3: restored_externa
Task 0xc05623a0: 3000 pages, 2 threads: pid 4: restored_externa
2014-02-24 14:13:02.248 [1192:f44]: connected to service com.apple.mobile.restored
2014-02-24 14:13:02.248 [1192:f44]: using protocol version 12
2014-02-24 14:13:02.256 [1192:f44]: unable to open device_map.txt: No such file or directory
2014-02-24 14:13:02.257 [1192:f44]: board config = n81ap
2014-02-24 14:13:02.264 [1192:f44]: no value returned for BootArgs
2014-02-24 14:13:02.264 [1192:f44]: _copyDeviceProperty() failed for restore bootargs
2014-02-24 14:13:02.272 [1192:f44]: no value returned for MarketingPartNumber
2014-02-24 14:13:02.272 [1192:f44]: _copyDeviceProperty() failed for mpn
2014-02-24 14:13:02.273 [1192:f44]: requested restore behavior: Erase
2014-02-24 14:13:02.274 [1192:f44]: amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
2014-02-24 14:13:02.285 [1192:f44]: value query for 'HardwareModel' returned 'N81AP'
2014-02-24 14:13:32.300 [1192:f44]: <Restore Device 06F59780>: operation 28 progress -1
2014-02-24 14:13:32.364 [1192:f44]: device returned CFError with code 40
2014-02-24 14:13:32.364 [1192:f44]: dumping CFError returned by restored:
2014-02-24 14:13:32.364 [1192:f44]: CFError domain:AMRestoreErrorDomain code:40 description:storage device did not become available
2014-02-24 14:13:32.384 [1192:f44]:
==== device restore output ====
"P=N81 m=2.2 V=m"
AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-169.10 Feb 13 2013 22:10:14
AppleBCMWLANCore::init(): AppleBCMWLANV2-169.10 Feb 13 2013 22:10:17
000522.906303 wlan.W[0] AppleBCMWLANProvisioningManager::parseApplePrivateCIS(): @24 - Invalid 2.4 GHz Cal data in tuple 0x02
000522.907778 wlan.N[1] AppleBCMWLANProvisioningManager::handleBluetoothRegistrationGated(): Wrote bluetooth Mac Addr <<<mac address>>>
000522.909596 wlan.N[2] AppleBCMWLANConfigManager::gatherParameterData(): AWDL is not supported.
000522.914563 wlan.N[3] AppleBCMWLANCore:start(): Starting with MAC Address: <<<mac address>>>
000522.914795 wlan.W[4] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 80, error 61 (state 0x20)
IO80211PeerManager::initWithInterface cant add monitoring timer
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x916e0600
000522.916824 wlan.N[5] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0x83b41000 (this 1, provider 0)
000522.916944 wlan.N[6] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
display-scale = 2
display-rotation = 0
found suitable IOMobileFramebuffer: AppleCLCD
display: 640 x 960
found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP
AppleSynopsysOTGDevice          Interface: PTP
AppleSynopsysOTGDevice - Configuration: iPod USB Interface
AppleSynopsysOTGDevice          Interface: USBAudioControl
AppleSynopsysOTGDevice          Interface: USBAudioStreaming
AppleSynopsysOTGDevice          Interface: IapOverUsbHid
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice          Interface: PTP
AppleSynopsysOTGDevice          Interface: AppleUSBMux
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice          Interface: PTP
AppleSynopsysOTGDevice          Interface: AppleUSBMux
AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 13 2013 22:02:59
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
read new style signature 0x43313131 (line:389)
[FTL:MSG] VSVFL Register [OK]
[WMR:MSG] Metadata whitening is set in NAND signature
[FTL:MSG] VFL Init            [OK]
[VFL:ERR] _LoadVFLCxt(line:1479) fail CS 1!
[VFL:ERR] _LoadVFLCxt(wCSIdx:1)(line 1779) fail!
[WMR:ERR] VFL_Open failed
AppleNANDLegacyFTL::start: AND init failed
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49152 62078<-usb->512
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(12, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(15, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(18, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49153 62078<-usb->768
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49154 62078<-usb->1024
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49155 62078<-usb->1280
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816210
AppleUSBDeviceMux::handleConnectResult new session 0x91816210 established 62078<-lo0->49156 62078<-usb->1536
AppleUSBDeviceMux::handleConnectResult new session 0x91816268 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x91816268
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x90fcce70
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x90fcce70 established 62078<-lo0->49159 62078<-usb->2304
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49162 62078<-usb->3072
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49163 62078<-usb->3328
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49164 62078<-usb->3584
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'BootArgs' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
unrecognized key 'MarketingPartNumber' in value query
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
client protocol version 13
*** UUID B30995A9-9CBE-F743-9507-039BDD0D56EF ***
Restore options:
          UUID                           => <CFString 0x1ed27a50 [0x32b100]>{contents = "B30995A9-9CBE-F743-9507-039BDD0D56EF"}
          MinimumSystemPartition         => <CFNumber 0x1ed279a0 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
          SystemPartitionSize            => <CFNumber 0x1ed28300 [0x32b100]>{value = +1152, type = kCFNumberSInt64Type}
          SystemPartitionPadding         => <CFBasicHash 0x1ed27470 [0x32b100]>{type = mutable dict, count = 5,
entries =>
          2 : <CFString 0x1ed277b0 [0x32b100]>{contents = "128"} = <CFNumber 0x1ed279d0 [0x32b100]>{value = +1280, type = kCFNumberSInt64Type}
          3 : <CFString 0x1ed27ce0 [0x32b100]>{contents = "16"} = <CFNumber 0x1ed27a00 [0x32b100]>{value = +160, type = kCFNumberSInt64Type}
          4 : <CFString 0x1ed1f1a0 [0x32b100]>{contents = "32"} = <CFNumber 0x1ed274d0 [0x32b100]>{value = +320, type = kCFNumberSInt64Type}
          5 : <CFString 0x1ed27100 [0x32b100]>{contents = "8"} = <CFNumber 0x1ed282f0 [0x32b100]>{value = +80, type = kCFNumberSInt64Type}
          8 : <CFString 0x1ed274e0 [0x32b100]>{contents = "64"} = <CFNumber 0x1ed27340 [0x32b100]>{value = +640, type = kCFNumberSInt64Type}
entering partition_nand_device
device supports boot-from-NAND
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49165 62078<-usb->3840
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49166 62078<-usb->4096
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49167 62078<-usb->4352
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49168 62078<-usb->4608
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
AppleUSBDeviceMux::handleConnectResult new session 0x918160b0 established 62078<-lo0->49169 62078<-usb->4864
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x918160b0
[IOFlashPartitionScheme:ERR] AppleNANDFTL initialization failed
[nand_part_core:ERR@ 429] no fbbt service available
[nand_part_core:BUG@3024] failed to create partition devices
unable to check is-bfn-partitioned property
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND failed to initialize: No additional error message.
==== end of device restore output ====
2014-02-24 14:13:32.384 [1192:f44]: AMRAuthInstallDeletePersonalizedBundle
2014-02-24 14:13:32.892 [1192:f44]: <Restore Device 06F59780>: Restore failed (result = 40)
2014-02-24 14:13:33.517 [1192:14d4]: iTunes: Restore error 40
2014-02-24 14:15:03.369 [1192:120]: Looking up device with muxID:1
2014-02-24 14:15:03.369 [1192:120]: Muxed device disconnected
2014-02-24 14:15:03.369 [1192:120]: RestoreOS mode device disconnected
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.873 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3
2014-02-24 14:15:09.916 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.955 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:09.993 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2014-02-24 14:15:10.011 [1192:17a4]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.123 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3
2014-02-24 14:15:10.165 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.188 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.211 [1192:17a4]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x063eb870, notify: 1, connected: 1
2014-02-24 14:15:10.223 [1192:17a4]: WinAMRestore::ProcessDevNodesChanges: device: 0x10bf1a50, notify: 2, connected: 0
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2014-02-24 14:15:10.223 [1192:17a4]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#7caf03a 3, inst: 0x63eb870
2014-02-24 14:15:10.223 [1192:17a4]:                             IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#7caf03a3, inst: 0x63eb870
2014-02-24 14:15:10.230 [1192:1230]: Recovery mode device connected
2014-02-24 14:15:10.231 [1192:1230]: Found new device.
2014-02-24 14:15:10.241 [1192:14d4]: iTunes: SCEP 2

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

ITunes log file.. Does one exist?

To cut a long story short, I want to know if there is a log file that tells you everything iTunes does to your iDevice. For example, when you're syncing and you see messages in the status area of iTunes, are these or a more detailed anything recorded somewhere?
Long story and why I want to have access to this information
Some time back during a normal and everyday sync, my Mac decided I didn't need certain apps on my phone anymore and proceeded to delete about 80 or so. I did see the status area at the top of iTunes tell me it was deleting certain apps, and I thought, nah, why would it do that. After the sync, I checked and sure enough it had deleted them. I was a might bit angry and even sent a nasty letter to apple and asked why would iTunes all of a sudden decide I don't need these anymore? They were unable to help, and due to their poor invoicing system where I can't just list everything I've bought from them I send them another email asking for assistance to which this time they could help. Basically they let me redownload all my apps again, but I no longer had access to apps where the developer was no longer in the program, regardless of whether I paid for them or not... I did learn valuable lessons from this and I hope that it never happens again....
But one thing I am really sick of is iTunes (and apple) doing things without telling me what it is they are doing...
Just before I hooked up my phone which is set to NOT automatically sync on connection and it started syncing. Yes, I know this will always happen regardless, but usually it's only momentary, and then stops. But this continued on and on for several minutes. However, according to itunes it wasn't syncing, there was nothing at all in the status area. After about 6-7 minutes, the syncing disappeared, I then proceeded to do a sync, which took several minutes. So what was it doing? It was doing something, but what?
Does iTunes have a log file somewhere that will tell me what it's doing and hence maybe I can workout why it's doing it? Ideally, should iTunes decked it wants to delete records and apps again (I'm CONSTANTLY losing calendar appointments), I may be able to debug why it happens.

You are asking in the wrong forum.
http://discussions.apple.com/forum.jspa?forumID=1227

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

I receive many e-mails with zipped files. In the past few weeks I can no longer open them as I used to. I get a window welcoming me to the Application Loader. ( What is an Application Loader?) It says I need my iTunes Connect login, but when I try my

I receive many e-mails with zipped files. I can no longer open or unzip my files. A window welcoming me to Application Loader drops down. It prompts for an iTunes Connect login, but will no accept my iTunes login. I have no way to open or unzip my files. Help!!!!

Application Loader, unless there's another one I'm not familiar with, is part of the iOS SDK. That have usurped the .zip, or you may have removed that application but your Mac is still holding onto the mapping of Zip files to that application. Select a .zip file in Finder, Get Info, and go to the Open with section. Select Archive Utility and click Change All. That should fix the problem.
Regards.

Fatal NI connect error 12203 resulting huge increase in sqlnet.log file

Hi,
I am getting the following error message in SQLNET.LOG file on the client machine. This is my upload program which takes few hours to complete and during the program run, the size of SQLNET.LOG file keeps on increasing and goes to 100's of MB and it contains only this error repeatedly.
But my program gets connected to Database and does the upload. But the size of SQLNET.LOG file grows like anything. Pls let me know what's going wrong.
ERROR in SQLNET.LOG File -
Fatal NI connect error 12203, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle80)(ARGV0=oracle80ORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\ORAWIN95\BIN\IFRUN60.EXE)(HOST=IT_DBA)(USER=IT))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 8.0.5.0.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.0.4.0.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.0.5.0.0 - Production
Time: 06-MAR-03 12:37:08
Tracing not turned on.
Tns error struct:
nr err code: 12203
TNS-12203: TNS:unable to connect to destination
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 102
TNS-00102: Keyword-Value binding operation error
nt secondary err code: 0
nt OS err code: 0
Regards,
Mitesh V.

Hi,
Actually I thought this error is appearing in only one of the machines, but when I am figuring out, I found the same error in almost all the client machines.
Though the programs are running fine getting the database connectivity, I am not able to find why it is giving error showing connection through BEQ protocol.
Pls someone tell me why this is happening and how I will find out which protocol it is using.
Regards,
Mitesh Vijayvargiy

Problems logging on to itunes connect

I was just approved as a developer but cannot log on to Itunes connect. Any one know why?

Give the backend time to migrate your new info across all related systems, etc.
If you still can't access in a day or two, try contacting [email protected] to investigate signup issues.

For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found). What gives?

For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found). What gives?

Sounds like the file yo are trying to sync to the iPod is corrupted.
Try syncing only one item that plays in iTunes on the computer.
Also see the following since when you downgrade iTunes you have to reset your iTunes library since the older version can't read the updated version of the library.

Cannot connect to database because log file is deleted

Greetings,
I just recently cleaned up some junk files from my PC and didn't realize that an oracle log file got deleted. Therefore when I try to connect to the database I got the following error:
ORA-01033: ORACLE initialization or shutdown in progress
From sql plus, I try to shutdown and startup the database so that I know what kind of file that got deleted. So, how can I fix the problem?
regards,
valerie
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 18 11:46:46 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> startup
ORA-01031: insufficient privileges
SQL> connect firefly
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SQL> connect sys/manager as sysdba
Connected.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size                  1286220 bytes
Variable Size              92278708 bytes
Database Buffers           50331648 bytes
Redo Buffers                2904064 bytes
Database mounted.
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1:
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL>

Hi Hermant,
I'm not sure if it in archivelog mode or not. The following is the content of alert_xe:
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 10:53:16 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU                 : 1 - type 586, 1 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:698M/990M, Ph+PgF:1306M/1621M, VA:1945M/2047M
Fri Sep 18 10:53:16 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions                 = 49
__shared_pool_size       = 79691776
__large_pool_size        = 8388608
__java_pool_size         = 4194304
__streams_pool_size      = 0
spfile                   = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target               = 146800640
control_files            = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size          = 50331648
compatible               = 10.2.0.1.0
db_recovery_file_dest    = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management          = AUTO
undo_tablespace          = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers              = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest     = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name                  = XE
open_cursors             = 300
os_authent_prefix        =
pga_aggregate_target     = 31457280
PMON started with pid=2, OS id=4052
PSP0 started with pid=3, OS id=4048
MMAN started with pid=4, OS id=3220
DBW0 started with pid=5, OS id=3568
LGWR started with pid=6, OS id=3292
CKPT started with pid=7, OS id=3868
SMON started with pid=8, OS id=4004
RECO started with pid=9, OS id=3140
CJQ0 started with pid=10, OS id=2484
MMON started with pid=11, OS id=2840
MMNL started with pid=12, OS id=3348
Fri Sep 18 10:53:16 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 10:53:19 2009
alter database mount exclusive
Fri Sep 18 10:53:24 2009
Setting recovery target incarnation to 2
Fri Sep 18 10:53:25 2009
Successful mount of redo thread 1, with mount id 2578987615
Fri Sep 18 10:53:25 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 10:53:25 2009
alter database open
Fri Sep 18 10:53:27 2009
Beginning crash recovery of 1 threads
Fri Sep 18 10:53:28 2009
Started redo scan
Fri Sep 18 10:53:28 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2876.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 10:53:28 2009
Aborting crash recovery due to error 313
Fri Sep 18 10:53:28 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2876.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 10:53:33 2009
Starting ORACLE instance (normal)
Fri Sep 18 11:08:24 2009
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Sep 18 11:16:12 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:20:11 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU                 : 1 - type 586, 1 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:647M/990M, Ph+PgF:1346M/1621M, VA:1945M/2047M
Fri Sep 18 11:20:11 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions                 = 49
__shared_pool_size       = 79691776
__large_pool_size        = 8388608
__java_pool_size         = 4194304
__streams_pool_size      = 0
spfile                   = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target               = 146800640
control_files            = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size          = 50331648
compatible               = 10.2.0.1.0
db_recovery_file_dest    = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management          = AUTO
undo_tablespace          = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers              = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest     = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name                  = XE
open_cursors             = 300
os_authent_prefix        =
pga_aggregate_target     = 31457280
PMON started with pid=2, OS id=2696
PSP0 started with pid=3, OS id=2700
MMAN started with pid=4, OS id=2704
DBW0 started with pid=5, OS id=2708
LGWR started with pid=6, OS id=2712
CKPT started with pid=7, OS id=2716
SMON started with pid=8, OS id=2720
RECO started with pid=9, OS id=2724
CJQ0 started with pid=10, OS id=2728
MMON started with pid=11, OS id=2732
MMNL started with pid=12, OS id=2736
Fri Sep 18 11:20:11 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:20:20 2009
alter database mount exclusive
Fri Sep 18 11:20:26 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:20:27 2009
Successful mount of redo thread 1, with mount id 2579045300
Fri Sep 18 11:20:27 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:20:29 2009
alter database open
Fri Sep 18 11:20:32 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:20:33 2009
Started redo scan
Fri Sep 18 11:20:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2772.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:20:34 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:20:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2772.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:20:39 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:31:16 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU                 : 1 - type 586, 1 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:673M/990M, Ph+PgF:1371M/1621M, VA:1945M/2047M
Fri Sep 18 11:31:16 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions                 = 49
__shared_pool_size       = 79691776
__large_pool_size        = 8388608
__java_pool_size         = 4194304
__streams_pool_size      = 0
spfile                   = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target               = 146800640
control_files            = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size          = 50331648
compatible               = 10.2.0.1.0
db_recovery_file_dest    = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management          = AUTO
undo_tablespace          = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers              = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest     = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name                  = XE
open_cursors             = 300
os_authent_prefix        =
pga_aggregate_target     = 31457280
PMON started with pid=2, OS id=2740
PSP0 started with pid=3, OS id=2744
MMAN started with pid=4, OS id=2752
DBW0 started with pid=5, OS id=2756
LGWR started with pid=6, OS id=2760
CKPT started with pid=7, OS id=2764
SMON started with pid=8, OS id=2768
RECO started with pid=9, OS id=2772
CJQ0 started with pid=10, OS id=2776
MMON started with pid=11, OS id=2780
MMNL started with pid=12, OS id=2784
Fri Sep 18 11:31:16 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:31:21 2009
alter database mount exclusive
Fri Sep 18 11:31:26 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:31:27 2009
Successful mount of redo thread 1, with mount id 2579028809
Fri Sep 18 11:31:27 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:31:27 2009
alter database open
Fri Sep 18 11:31:28 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:31:28 2009
Started redo scan
Fri Sep 18 11:31:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2816.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:31:29 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:31:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2816.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:31:34 2009
Starting ORACLE instance (normal)
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:40:56 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU                 : 1 - type 586, 1 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:656M/990M, Ph+PgF:1371M/1621M, VA:1945M/2047M
Fri Sep 18 11:40:56 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions                 = 49
__shared_pool_size       = 79691776
__large_pool_size        = 8388608
__java_pool_size         = 4194304
__streams_pool_size      = 0
spfile                   = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target               = 146800640
control_files            = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size          = 50331648
compatible               = 10.2.0.1.0
db_recovery_file_dest    = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management          = AUTO
undo_tablespace          = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers              = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest     = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name                  = XE
open_cursors             = 300
os_authent_prefix        =
pga_aggregate_target     = 31457280
PMON started with pid=2, OS id=2612
PSP0 started with pid=3, OS id=2616
MMAN started with pid=4, OS id=2624
DBW0 started with pid=5, OS id=2628
LGWR started with pid=6, OS id=2632
CKPT started with pid=7, OS id=2636
SMON started with pid=8, OS id=2640
RECO started with pid=9, OS id=2644
CJQ0 started with pid=10, OS id=2648
MMON started with pid=11, OS id=2652
MMNL started with pid=12, OS id=2656
Fri Sep 18 11:40:57 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:40:59 2009
alter database mount exclusive
Fri Sep 18 11:41:04 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:41:05 2009
Successful mount of redo thread 1, with mount id 2579051403
Fri Sep 18 11:41:05 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:41:05 2009
alter database open
Fri Sep 18 11:41:06 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:41:07 2009
Started redo scan
Fri Sep 18 11:41:07 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2692.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:41:07 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:41:07 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_2692.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:41:11 2009
Starting ORACLE instance (normal)
Shutting down instance: further logons disabled
Fri Sep 18 11:43:19 2009
Stopping background process CJQ0
Fri Sep 18 11:43:19 2009
Stopping background process MMNL
Fri Sep 18 11:43:19 2009
Stopping background process MMON
Fri Sep 18 11:43:19 2009
Shutting down instance (immediate)
License high water mark = 1
Fri Sep 18 11:43:19 2009
Stopping Job queue slave processes
Fri Sep 18 11:43:19 2009
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Fri Sep 18 11:43:20 2009
alter database close normal
ORA-1109 signalled during: alter database close normal...
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Sep 18 11:43:27 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU                 : 1 - type 586, 1 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:708M/990M, Ph+PgF:1375M/1621M, VA:1945M/2047M
Fri Sep 18 11:43:27 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions                 = 49
__shared_pool_size       = 79691776
__large_pool_size        = 8388608
__java_pool_size         = 4194304
__streams_pool_size      = 0
spfile                   = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target               = 146800640
control_files            = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size          = 50331648
compatible               = 10.2.0.1.0
db_recovery_file_dest    = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management          = AUTO
undo_tablespace          = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers              = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest     = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name                  = XE
open_cursors             = 300
os_authent_prefix        =
pga_aggregate_target     = 31457280
PMON started with pid=2, OS id=3168
PSP0 started with pid=3, OS id=3172
MMAN started with pid=4, OS id=3176
DBW0 started with pid=5, OS id=3180
LGWR started with pid=6, OS id=3184
CKPT started with pid=7, OS id=3188
SMON started with pid=8, OS id=3192
RECO started with pid=9, OS id=3196
CJQ0 started with pid=10, OS id=3200
MMON started with pid=11, OS id=3204
MMNL started with pid=12, OS id=3208
Fri Sep 18 11:43:28 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:43:28 2009
alter database mount exclusive
Fri Sep 18 11:43:32 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:43:32 2009
Successful mount of redo thread 1, with mount id 2579057184
Fri Sep 18 11:43:32 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Sep 18 11:43:33 2009
alter database open
Fri Sep 18 11:43:34 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:43:34 2009
Started redo scan
Fri Sep 18 11:43:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3240.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:43:34 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:43:34 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3240.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Fri Sep 18 11:43:38 2009
Starting ORACLE instance (normal)
Fri Sep 18 11:47:55 2009
Shutting down instance: further logons disabled
Fri Sep 18 11:47:55 2009
Stopping background process CJQ0
Fri Sep 18 11:47:55 2009
Stopping background process MMNL
Fri Sep 18 11:47:55 2009
Stopping background process MMON
Fri Sep 18 11:47:55 2009
Shutting down instance (immediate)
License high water mark = 1
Fri Sep 18 11:47:55 2009
Stopping Job queue slave processes
Fri Sep 18 11:47:55 2009
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S001' to die
All dispatchers and shared servers shutdown
Fri Sep 18 11:47:56 2009
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Fri Sep 18 11:47:56 2009
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Sep 18 11:48:23 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions                 = 49
__shared_pool_size       = 79691776
__large_pool_size        = 8388608
__java_pool_size         = 4194304
__streams_pool_size      = 0
spfile                   = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target               = 146800640
control_files            = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size          = 50331648
compatible               = 10.2.0.1.0
db_recovery_file_dest    = C:\oraclexe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management          = AUTO
undo_tablespace          = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers              = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest     = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest           = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name                  = XE
open_cursors             = 300
os_authent_prefix        =
pga_aggregate_target     = 31457280
PMON started with pid=2, OS id=3628
PSP0 started with pid=3, OS id=3632
MMAN started with pid=4, OS id=3636
DBW0 started with pid=5, OS id=3640
LGWR started with pid=6, OS id=3644
CKPT started with pid=7, OS id=3648
SMON started with pid=8, OS id=3652
RECO started with pid=9, OS id=3656
CJQ0 started with pid=10, OS id=3660
MMON started with pid=11, OS id=3664
MMNL started with pid=12, OS id=3668
Fri Sep 18 11:48:24 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Sep 18 11:48:24 2009
ALTER DATABASE   MOUNT
Fri Sep 18 11:48:29 2009
Setting recovery target incarnation to 2
Fri Sep 18 11:48:29 2009
Successful mount of redo thread 1, with mount id 2579048520
Fri Sep 18 11:48:29 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Fri Sep 18 11:48:29 2009
ALTER DATABASE OPEN
Fri Sep 18 11:48:29 2009
Beginning crash recovery of 1 threads
Fri Sep 18 11:48:29 2009
Started redo scan
Fri Sep 18 11:48:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3708.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Sep 18 11:48:29 2009
Aborting crash recovery due to error 313
Fri Sep 18 11:48:29 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3708.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: ALTER DATABASE OPEN...
Fri Sep 18 11:53:41 2009
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard

Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard
Regards,
Amar

See the "More Like This" section over there ===============>
In the future, search before posting.

Cannot log in iTunes Connect

Anyone sees this when you try to log in iTunes Connect?
Apprently I am supposed to set up "reset password question", but there is something wrong about the system. Is it only me, or everybody seeing this?

Email:
<www.apple.com/itunes/go/itunesconnect/contactus>
iTunes Connect Support <[email protected]>
[email protected]
Contact [email protected] to investigate signup issues.
clear Safari caches if issues, etc.
Apple Developer Relations:
(800) 633 2152
(408) 974 4897

WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log file

<b>WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log file</b>
          We are using WLS 7.0.4 - One of JMS connection factory setting in admin console we selected "Server Affinity" options.
          We see this messages appear in Weblogic log file,
          ####<Apr 24, 2006 1:56:53 AM EDT> <Error> <Cluster> <liberatenode4.dc2.adelphia.com> <node4_svr> <ExecuteThrea
          d: '4' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <000123> <Conflict start: You tried to bi
          nd an object under the name sbetrmi2 in the JNDI tree. The object you have bound from liberatenode2.dc2.adelp
          hia.com is non clusterable and you have tried to bind more than once from two or more servers. Such objects ca
          n only deployed from one server.>
          and then,
          ####<Apr 24, 2006 1:58:12 AM EDT> <Error> <Cluster> <liberatenode5.dc2.adelphia.com> <node5_svr> <ExecuteThrea
          d: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <000125> <Conflict Resolved: sbetrmi2 for
          the object from liberatenode5.dc2.adelphia.com under the bind name sbetrmi2 in the JNDI tree.>
          Should we use 'load balancing option' instead of 'server affinity' ?
          Any thuoghts?
          Thanks in adv.
          Vijay

Test Reply
          <Vijay Kumar> wrote in message news:[email protected]..
          > <b>WLS 7.0.4 - JMS Connection Factory - Server Affinity - issues in log
          > file</b>
          >
          > We are using WLS 7.0.4 - One of JMS connection factory setting in admin
          > console we selected "Server Affinity" options.
          >
          > We see this messages appear in Weblogic log file,
          > ####<Apr 24, 2006 1:56:53 AM EDT> <Error> <Cluster>
          > <liberatenode4.dc2.adelphia.com> <node4_svr> <ExecuteThrea
          > d: '4' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
          > <000123> <Conflict start: You tried to bi
          > nd an object under the name sbetrmi2 in the JNDI tree. The object you have
          > bound from liberatenode2.dc2.adelp
          > hia.com is non clusterable and you have tried to bind more than once from
          > two or more servers. Such objects ca
          > n only deployed from one server.>
          >
          > and then,
          > ####<Apr 24, 2006 1:58:12 AM EDT> <Error> <Cluster>
          > <liberatenode5.dc2.adelphia.com> <node5_svr> <ExecuteThrea
          > d: '7' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <>
          > <000125> <Conflict Resolved: sbetrmi2 for
          > the object from liberatenode5.dc2.adelphia.com under the bind name
          > sbetrmi2 in the JNDI tree.>
          >
          >
          > Should we use 'load balancing option' instead of 'server affinity' ?
          >
          > Any thuoghts?
          >
          > Thanks in adv.
          > Vijay

Excluding connections from certain hosts in log file

Is it possible to exclude connections from certain IP addresses from
getting written into the log on a 5.0 server?
I have monitoring systems that do frequent health checks by binding to
the server and it adds lots of lines to my logs (about 14 MB per day)
that I don't need or care about. I'd like to exclude these connections
from showing up.
thanks,
Gary LaVoy
[email protected]

Gary LaVoy wrote:
Is it possible to exclude connections from certain IP addresses from
getting written into the log on a 5.0 server?
I have monitoring systems that do frequent health checks by binding to
the server and it adds lots of lines to my logs (about 14 MB per day)
that I don't need or care about. I'd like to exclude these connections
from showing up.
No, this is not possible
What you can potentially do is to use the log file rotation and do something like a grep -v to supress the lines that you don't want in the rotated file that won't be used anymore by the server.
Regards
Daniel

Log files for BT infinity connection

Anyone able to tell me if i can get any log files from the BT infinity kit so i can see when it drops a connection, and what its reporting?
My draytek 2850vn allows this, so I want to compare with the BT kit to see if its a line issue or draytek modem issue
any advice appreciated.
I have the Huawei EchoLife HG612 modem and home hub 3
best wishes
andy

If you have a HomeHub the event logs should be under troubleshooting -> Event Log

ITunes connection log file?

Similar Messages

Maybe you are looking for