ITunes content not visible when connected to internet via wireless

I have been having problems with my Apple TV. It did not show any iTunes Store content. After some considerable attempts at reconfiguration, I finally restored to factory settings and I still could not connect to the internet via my airport extreme wireless network. I therefore ran an ethernet cable instead and all the itunes store content appeared and I was able to sync with my Macbook Pro. I then looked at the network configeration using the ethernet recorded the settings and took the cable out. Then reconnected using the wireless connection, initally it could not connect to the internet but then I went through the manual connection and set the settings using DCHP and it then connected but once again there is no iTunes store content, if I reconnect the iTune store content comes back as does the uTube and internet radio both of which also disappear if I try and go wireless. Any thoughts?

are you connecting to the same router for the ethernet and wireless connections?

Similar Messages

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Server not responding when connected to Internet

    ServerSere ever not responding when connected to internet

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Wi-Fi settings grayed out or dim

  • Can't connect to internet via wireless

    I am unable to connect to the internet via wireless on a consistent basis I can ping my router every time though. When the internet works it seems to be completely random. I tried some fixes posted on the forums for problems similar to mine like, setting my default gateway and using open dns servers, but neither of those fixes seemed to help with my set up. Any ideas?
    My wireless card uses the Ralink rt 2760 chipset. Thanks

    What are the characteristics of the wireless networks to which you are trying to connect?
    Are they managed or ad-hoc?
    Are they WEP?
    Are they WPA?
    If the link is encrypted but the NIC isn't, the NIC will associate with the network and a ping will work, but any packet containing actual data (like a DHCP request, any TCP or UDP request, SNMP, etc... ) will fail.
    As a quick test, if you have administrative rights to your access point, turn off WEP and WPA and see if you can connect.  I advise you turn encryption back on when you are done with the experiment.

  • ITunes does not load when connecting iPod Nano (4th Gen)

    I have my iTunes settings 'disable automatic syncing for iphones and ipods' unchecked, and in my iPod settings i have 'open iTunes when connected' option checked, and iTunes still does not load. How do I solve this?

    If you have itunes open and then connect the nano, what happens?

  • Time Capsule not visible when connecting via range extender

    Hi,
    I have configured a TP-Link WA750RE to expand the range of my Time Capsule's wireless network. The range extender works fine for surfing the web etc., but the Time Capsule doesn't show up as my Time Machine backup device and the Time Capsule is not visible in my Airport Utility. What's even stranger is that when I click on "Configure other" (shift + command + o) in Airport Utility and type in my Time Capsule's IP-address and password, I can still access the devices' configuration menu.
    When I move my Macbook very close to my Time Machine to connect directly to the wireless network, leaving out the range extender, none of the above mentioned problems occur. The TP-Link range extender has no NAT or port configuration that could possibly cause this problem, so I'm out of ideas for a way to solve this problem.
    Thank you in advance for your help.

    A non-apple range extender is not passing the protocols that apple uses.. eg bonjour.. This is a standard problem and why you stick with using Apple's own routers for extensions.

  • Extreme antenna not visible, but connected to internet

    hi. i'm fully connected to the internet via airport extreme, but if i open the airport admin utility, it can't see nothing (i've 2 airport extreme and an express). why? what can i do? iTunes also miss the express and i cannot stream music...
    OS updated with sys update.

    are you connecting to the same router for the ethernet and wireless connections?

  • Connecting the internet via wireless

    Hi,
    I have a four month old mac book pro and a linksys router with no password on it..
    When I go to school or to my other house I can connect to wireless effortlessly but just lately when I am at home I cannot get on the internet. I have a full signal and it says I'm connected but safari says I'm not connected to the internet. I remember the girl on the phone did something about obtaining an ip automatically but I can't really remmeber
    the network status says im connected but i have a self assigned ip address and may not be able to connect to internet
    thanks for your help guys

    Open System Preferences/Network and select Airport, click the TCP/IP button and check what's set for 'Configure IPv4 using'
    It should say 'Using DHCP', if not select that and hit the 'Apply' button and see what it comes back with ?

  • Itunes will not open when connecting iPhone

    Does any one have a clue how to fix this issue? I have two iPhones (my wife's and mine). I don't have that problem with her's. Thanks in advance.

    That support document was for if the iPhone was not recognized by iTunes. You say now that it is, and that is why you do not see a solution.
    I'm not sure about the setting for opening iTunes, because I have automatic syncing turned off. That can be especially important if you are having issues with the phone. An automatic sync can delete things when syncing with an empty calendar, or contacts list. I've always opened my iTunes manually, but you can also uninstall iTunes and reinstall it. If you are using Windows, you need to do this by following this support document exactly. http://support.apple.com/kb/HT1923

  • I Am Not Able To Connect To Internet Via Wifi

    I Am Goin To Settings Wifi i can see my routers name when i click on it its asking to enter password it never asked before and when i am entering it the just rotating it not connecting at all i restarted but still no results pls help me......!!

    Try Forget This Network.
    Settings>Wi-Fi>tap little arrow on right of network.
    http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg

  • Slow initial connection to internet via wireless router

    Hi,
      I have a D-Link Xtreme N 450 wireless router that I used with a MacBook Pro running 10.9.3.  When I first open the computer, the internet quickly connects (I can surf, get email, etc), but after a few seconds it disconnects, searches for a wireless router, and then gives me the exclamation point in the wireless icon.  It stays down for a 1-3 minutes, then mysteriously reconnects.  I've looked everywhere for a solution and cannot seem to find one.  I ran wireless diagnostics and got one error message that may be the problem - it says a nearby wireless router has the wrong country code and could be causing problems.  But has anyone else had this issue or think they know of a potential solution?
    Thanks!

    am in the DFW area using Verizon Fios - I have a D-Link DIR-655 router and a 24" Imac running Mac OS X 10.5.1. I purchased the Apple Airport router thinking the problem with internet speed might be my router. This was not the case - every computer in the house was much slower using the Airport - so I returned it to my Apple store.
    I have now switched off the bluetooth and airport on my Mac - it is hooked straight into the router and every day at about 6:00 it slows down to turtle speed while my other 2 laptops that are wireless in the house and much older - are lightening fast.
    I have called Verizon and had them out - they say there are not enough people on Fios to create any traffic problems at certain times of the day - which I believe being that the Apple Imac is the only computer with the problem.
    I have downloaded Firefox and have the exact same problem.
    There has got to be some solution for this - my speed checks out very fast during this time - T2 speed for download and upload - I'm ready to throw this apple out the window.

  • Itunes 10.4 not launching when connecting iphone

    Snow Leopard 10.6.8. Just updated iTunes to 10.4. iTunes will not launch when connecting the iPhone to my MacBook Pro. Once connected, manually opening iTunes will allow the sync to happen, but only then. iTunes helper app is there in Login items.
    Minor inconvenience, but could be a problem if I miss too many syncs due to this.
    Any thoughts?

    I had the exact same problem upgrading iTunes to 10.4 on Snow Leopard. It looks like there's a problem with iTunesHelper under Login Items. I found the solution here: https://discussions.apple.com/message/15666966 Simply follow the instructions to re-add iTunesHelper to Login Items, restart, and you should be good to go!

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • ITunes does not open when ipod connected

    Since installing the 1.1 update, iTunes does not open when I connect my nano to the computer. Both computer and iTunes (when I manually open it) recognize the nano, so no big deal. Just wondering how to make iTunes automatically open.

    Sometimes the Preferences get corrupt - if you set them off and then back on that sometimes clears the problem.
    Regards,
    Colin R.

Maybe you are looking for

  • From PC to Mac via external hard drive

    i really need some advice please... i have recently moved out of my parents house to live with my partner i bought a compatible external hard drive for PC and Mac so i could transfer all my music/iphone data etc the hard drive works fine with the mac

  • When I try to open my e-books I get a message saying I can't because the licence key is damaged. How do I fix this?

    I can't open my e-books because I get a message saying the license key is damaged. How did this happen and how do I fix it?

  • KF level Authorization using 0TCAKYFNM not working

    Hi, I need to restrict users from seeing a particular KF say cost in 0sd_c03 cube. I have done the following: 1. In RSECADMIN I created authorization ZCOST 2. I added 0TCAACTVT 0TCAIPROV 0TCAKYFNM 0TCAVALID 3. For 0TCAIPROV I gave value as 'Include'

  • Themes Places slow

    The Themes/Places in iPhoto is extremly slow. When It dowloads the map or after all the time when I start slideshow It startijg again. Not possible to wait. Is there any possibility to speed it up ( put map into cache or something else )?

  • EPCF Client Side Eventing

    Hello, I have been working on some EPCF client side eventing examples. I found the example by Dr. Ron Hendrickx at the following URL. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/iview client side eve