ITunes continues to give me error during installation

I have a old windows laptop and everytime I try and finish the installation it says error

The feed itself seems OK and can be subscribed to manually in iTunes, and the latest episode downloaded OK.
However, on checking the URL of the latest episode's media file in Safari resulted in a download: it should play in the browser. Though forcing a download doesn't seem to upset the iTunes application, the Store doesn't like it since it needs to be able to stream the file to play it in the Store page.
It's also a requirement that the server can handle 'byte range requests' (where only part of the file is requested at a time instead of the whole thing) because this is the method used by iTunes. It was testing for this that showed there was a problem because I got a 'forbidden' error (in other words, because a download is forced it's not possible to request only part of the file).
It must be possible to get this straight on Podomatic since they handle a lot of podcasts, but you will need to take it up with them and check that it's been corrected.
The first test is to paste the media file URL into Safari's address bar and hit return: after a short delay it should play in the browser window. If it downloads you still have a problem.

Similar Messages

Itunes 7.6 installation Fatal Error during installation

I successfully installed Itunes into my account - as the administrator. However, my other computer users users can't install the new version. The get a window that pops up: Problem with shortcut, fatal error during installation. I have tried removing and re-installing, I even followed all the steps in the trouble article #93976. I also deleted the user, created a new on, made that user an adminstrator and still can't install. HELP!

I found on another post that concerns this same topic that someone has responded with the following solution:
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.
I have not tried it yet, but when I have the time to sit and actually do it, and if it works, I will definitely let you guys know!

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Itunes: Fatal Error During Installation

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted and when I tried to open up iTunes(after restarting), a little window came up saying:
+Preparing to install...+
Then after a minute or two it said: +Please wait while Windows configures iTunes+
Then another window pops up saying:
+*Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. *+
+*Verify that you have access to that directory.*+
and I have no idea what that means so i closed it then a pop up shows saying: +Fatal Error During Installation.+
WHAT DO I DO?!?!? please help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

Try first going through this article to remove iTunes and Quicktime completely (http://docs.info.apple.com/article.html?artnum=93698).
After you remove everything, don't re-install yet. Download the Windows Installer Cleanup Utility (http://support.microsoft.com/kb/290301). After insalling that, remove any references of iTunes, Apple, or Quicktime in the list.
Try re-installing now.

Itune doesnt install showing error during installation of assembly ''Microsoft.VC80.CRT,type=wim32'',version=''8.0.50727.6195''.publicKeyToken=''1 fc8b3b9a1e18e3b

itune doesnt install showing error during installation of assembly ''Microsoft.VC80.CRT,type=wim32'',version=''8.0.50727.6195''.publicKeyToken=''1 fc8b3b9a1e18e3b

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

"problem with shortcut/fatal error during installation" on other user accts

I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Error during installation of oracle 10g on fedora14

Hi all,
I am trying to install oracle 10g on fedora14. However i am getting the error during installation.
Could you people suggest me the root cause...!!
Error log:
[oracle@test database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
Tried another option as well but same error:
[oracle@test database]$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success

Vinod Ranjan wrote:
Hi all,
I am trying to install oracle 10g on fedora14. However i am getting the error during installation.
Could you people suggest me the root cause...!!
Error log:
[oracle@test database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
Tried another option as well but same error:
[oracle@test database]$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Successpost results from below
id
env | sort
Edited by: sb92075 on Jun 21, 2011 9:33 AM

Error during installation of SAPNW ABAP 701SR1 SP3 trial version in phase 2

Hi,
I am trying to install SAPNW ABAP 701 SP3 trial version.I am getting error in phase 2
Running msiexec failed with return code 1603: Fatal error during installation.
I am installing on window vista.I have also checked the security setting for the user I am trying to install.It is adminstrator and have access for full control.
When I started the installation of sap it asked me for master password and that password is different from what I use to log on to windows.Could this be the reason for this problem or something else ?
Any help appreciated.
Thanks,
Rekha.

Install SAP MMC snap first and continue with old installation.... it will pass 2nd phase
thank you
Mohan

VS 2015 - Fatal error during installation - Cannot read key

I'm trying to install Visual Studio 2015 Preview from the ISO image. I get this error
Visual Studio Core Features
Fatal error during installation
Here are the relevant parts of the log file
http://privatepaste.com/d2f0080766
Trying to fix the permissions to the mentioned key (which I have done maybe ten times by now) only gives me a new error with a new key. Is there a better solution?
Windows 8.1

I downloaded the
Visual Studio 2015 Preview ISO Image in English onto Windows 7 PC. I didn't have an optical disk large enough to copy it to in order to install VS 2015 preview using ISO from optical disk drive.
So I used 7Zip to extract the files from the ISO into a folder on my desktop and then install it. There was no key needed as this is a preview version. So I was never asked about any key. Although it must've had a key that came with it because
after it installed I went to Help, Register Product and was advised after a bit that it updated with a key I suppose, even though it was already working, and the product was good for so many days.
Microsoft recommends the following for extracting files from an ISO in order to install the software without using an optical disk. I used 7Zip which is not recommended by MS.
The following tools offer .ISO file support:
IsoBuster
CDmage
Daemon Tools
Winrar
Also note: "Visual Studio 2015 Preview cannot be installed on a computer that has a previous version of Visual Studio "14" CTP installed. To install this release version, you must first
uninstall any currently installed CTP."
And I had installed .Net Framework 4.6 preview prior to installing VS 2015 preview.
La vida loca

1603 fatal error during installation-L7680 all in one printer

I continue to get this error because the installation finds newer software and quits. I have completed the MSI error 1603 solution 16 page paper for windows XP and was unsuccessful. I then used CCleaner to clean all registry errors, and that still didn't work.
Is there a quick fix to get past this error and install the latest scanner software on the HP site? I can print with this printer, but can not see it on the network nor use the scanner.
Best regards,
Ed

Hello @charleydog
Welcome to the forums
I read your post about the Fatal Error 1935 you're receiving when installing your Photosmart C4280 on your Windows 8.1 system.
I have located a specific document for this certain error you are seeing. I would suggest checking out the guide and trying out all of the steps it recommends to resolve the Fatal Error issue.
Fatal Error 'Error 1935. Fatal error during installation.' (MSI Error 1935) Displays During HP Softw...
I hope this helps you!
Have a terrific weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I cannot uninstall QuickTime because of a "Fatal error during installation."

I want to un-install itunes. Following the iTunes support guideline, I first removed iTunes. I then clicked on REMOVE Quicktime in the Control Panel.
I received the message "Please wait while windows configures Quicktime".
I then received the error message "Fatal error during installation" - OK.
How can I now remove Quicktime and follow on through the Support route of the remaining iTunes elements?

DEPs for iTunes and a fatal error when trying to uninstall QuickTime.
I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms, including the uninstall errors.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

TS5376 When I try to remove "Apple Mobile Device Support" I get a "Fatal error during installation" message. I have windows XP

The program will not start because MSVCR80.dll is missing. I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work. I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.

First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

Error during installation OS 10.8.2 getting restart and thin black break screen

error during installation OS 10.8.2 getting restart after apple logo several times and thin black&white crashed screen

I had this problem too.
Go to http://support.apple.com/kb/DL1580
Download the update manually and install. Worked on my MBP15 retina.
Regards
Chris

ITunes continues to give me error during installation

Similar Messages

Maybe you are looking for