Itunes 'corrupt' after upgrading to current version?

I have macbook, running snow leopard 10.6.8. This weekend I responded to the prompt to update Itunes to the newest version. After upgrading, I got the message that Itunes was corrupt (and it would not open or run). After searching for answers (including trying to update it again), I finally went through the process of deleting the corrupt Itunes.
Then I have attempted to download the latest Itunes from the Apple site; when I click 'download' I am taken immediately to the 'thank you for downloading Itunes' page, but nothing ever downloads.....
Any help/input would be most appreciated.
thanks,
Randy

Thanks but ITunes is gone (deleted corrupt version), and would not open before I deleted it. I had previously tried Yiur suggestion, then iTunes wouldn't even open after that.

Similar Messages

After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

Hi, I get the same error EVERY time iTunes updates.
I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
My Question:
Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
Thank You,
Steve

After upgrading to latest version of iTunes it will not remember my podcast password as it did before

After upgrading to latest version of iTunes it will not remember my podcast password as it did before

Hey becky612,
Thanks for the question. I understand that your iPod nano is not recognized in iTunes after updating. The following troubleshooting articles may provide a resolution based on your symptoms:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2, someone with the same problem? Just think when I enable the 3G, soon followed falls again.
I have already put another chip carrier and the same problem happens, my phone is factory unlocked.

Had same problem with iphone5 6.1.2 update. First tried reset network settings and didn work... Support recommend me a restore and ended up in recovery loop with iTunes error (-1)
Been at my carrier store (Optimus Portugal)... and iPhone sent to warranty. After 2 macbooks, 1 imac, 2 appletvs, 2 iphones, 1 ipod... I find disappointment with apple reliability....
At least the support guys at Optimus Portugal were very helpful and friendly, but I'll be 15 days without iPhone...
Regards
Joao

Unable to launch the application after upgrading Java to version 1.6.0_26

After upgrading Java to version 1.6.0_26 in Windows XP my web start throwing Exception. It works fine in Ubuntu with Java 1.6.0_24 and in Windows with older versions of Java 1.6.
Exception doesn't say anything:
java.lang.NullPointerException
 at com.sun.javaws.Launcher.executeApplication(Unknown Source)
 at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
 at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
 at com.sun.javaws.Launcher.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)Same as java console ouput
Java Web Start 1.6.0_26
Using JRE version 1.6.0_26-b03 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\esod
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
0-5: set trace level to <n>
#### Java Web Start Error:
#### nullMy Jnlp file looks like this
<jnlp spec="1.0+">
<information>
 <title>Editor</title>
 <vendor>Comapny name</vendor>
 <homepage href="http://company_urll" />
 <description>Editor/description>
</information>
<resources>
 <j2se version="1.6+" />
 <property value="true" name="javaws.cfg.jauthenticator" />
 <jar href="http://192.168.79.33:7070/resources/applet/formeditor.jar" />
</resources>
<security>
 <all-permissions />
</security>
<application-desc main-class="pl.rdata.formeditor.FormEditor">
 <argument>[email protected]</argument>
 <argument>rLq3347491</argument>
 <argument>17</argument>
 <argument>
 http://192.168.79.33:7070/formeditor/formManagerService.service</argument>
 <argument>
 http://192.168.79.33:7070/formeditor/customDataTypeManager.service</argument>
 <argument>
 http://192.168.79.33:7070/formeditor/authorizationService.service</argument>
 <argument>2</argument>
</application-desc>
</jnlp>This application is self signed.
When I download jar file to disk I can run it with command java -jar and it works fine.
After downloading jar I made some tests changing line <jar href="http://192.168.79.33:7070/resources/applet/formeditor.jar" /> in Jnlp file.
When I changed it to <jar href="formeditor.jar" />, and have jar in folder it works.
When I changed it to <jar href="file:///C:/formeditor.jar"> it is not working (same exception).
In every case jar is download correctly and it pass verifying.
can anyone help?
Regards
Michal

867322 wrote:
When I changed it to <jar href="formeditor.jar" />, and have jar in folder it works.Okay, so you at least have a workaround.
can anyone help?Search the bugs database to see if someone else already reported this; if not create a new bug entry. Whatever mistake you could make, you should not be getting a NullPointerException as a result so this is at the very least a bug in the error handling of webstart.
But just some observations to try and see if you can make a difference (which is added input for your bug report). If I check JNLP examples, I see that the url specified is usually without a protocol, so it could be like this:
<jar href="/resources/applet/formeditor.jar" />The JNLP should be on the host that you service the jar from, so Webstart can fill in the host information for itself.
Also you provide a main-class; if the jar manifest specifies a main-class (and it should) you don't need to specify it in your JNLP file.

Can't update iTunes Match after upgrading to 11.1.5

Hi,
Is anyone else (in Australia) having problems with iTunes Match after upgrading to iTunes 11.1.5 on Mac? I’ve found that whenever I play a track (i.e. update the play count), set a rating or edit a playlist, all my cloud songs become greyed out, the updates are not synced to the cloud (don’t appear on other devices), the iTunes Cloud music icon gets a lightning bolt through it (lost connect), and then my changes are lost. I can reconnect as many times as I like (by clicking on the cloud icon or restarting iTunes) and for a while everything ‘looks’ fine (can download and play songs) but actually nothing is saved to the cloud and the lightning bolt appears again when I make any of the above updates. I have another computer that still has 11.1.4 and iTunes Match is working fine on it.
James

Thanks Michael, I’d already tried both those (including applying the latest OS X security update and restarting). I kept trying to use iTunes Match every hour, and eventually it started working on my 11.1.5 computer and has staying working for the rest of the day. 11.1.4 was working the whole time.

Mini Bridge Missing from InDesign CS6 after Upgrade to InDesign Version 8.1

I discussed this same problem https://forums.adobe.com/message/5833991 after upgrading to the prior version 8.0.2 of InDesign.
After upgrading to InDesign Version 8.1, Mini Bridge no longer works. Mini Bridge does not show under the Window menu and shift-clicking the Bridge icon opens the full Bridge, not Mini Bridge.
With the prior version 8.0.2 problem, I was able to recover Mini Bridge by doing a re-install of InDesign under Window's Safe Mode. Microsoft has somehow changed Safe Mode and I can no longer do the reinstall using Safe Mode. I have tried several different ways of reinstalling version 8.1, but none of them correct this problem. Still no Mini Bridge.
Mini Bridge does work in Photoshop CS6 with no problem.
I have read through all of the messages that seem to relate to this problem in this forum, but none of the suggested solutions work for me.
Can anyone provide me with an answer? If not, how do I get help from Adobe? I am willing to pay for support, if necessary.

RESOLVED - I can't believe it, but I have actually figured this out.
Getting frustrated with going in circles, I decided to dig into security options. First off, I opened Windows' Properties for the start-up icon for InDesign. Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3). This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign. Low and behold, the option Window | Mini Bridge was now displayed! And it worked!
Sorry to have bothered you gentlemen with this problem. I really appreciate your assistance!
Mark.

The application uninstaller ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

Hi,
I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
Thanks,
Asier
Solved!
Go to Solution.

Hello -
Are you installing these distributions on a non-English operating system? If so, the first thing to try would be the workaround listed on this known issue.
The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
NickB
National Instruments

Since upgrading to current version I lost my card log in feature

I used to be able to save my usernames and passwords so that I wouldn't have to manually type them in. Why don't I have that since upgrading to current version?

Firefox 4 uses a new build-in home page called about:home
That about:home page only shows some snippets and has a button to restore the previous session if applicable.
If you want a home with extras then set another page as the home page like www.google.com or www.google.com/firefox used in Firefox 3 versions.

How I upgrade my current version of Apple Safari?

I am trying to log into hotmail and the message is "upgrade your current version of Apple Safari". When I ask for software update the computer says "Software Update doesn’t have any new software for your computer at this time." what should I do?
Thanks

Choose About this Mac from the Apple menu and check the processor.
If it's a PowerPC Mac, you need to switch browsers.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, upgrade it as if it was a Core Duo Mac, and if desired, open the Mac App Store, and try downloading 10.9. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
(110069)

HT1848 Where is the Transfer Purchases button on the current version of iTunes? I think the current version is 11.0.1.

Where is the Transfer Purchases button on the current version of iTunes? I think the current version is 11.0.1.

Oh jeez. I finally found that "Show Menu Bar" button that was hiding File. I've been looking for it for a week hah. Thanks.

Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
I tried it with a differnt Iphone and the results are the same. Any suggestions?

Hi JZN1994,
Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
Thanks for reaching out,
-Joe

Iphone 5S issue after upgrade to latest version 8.1.2

hi,
recently i upgrade my phone to latest version 8.1.2 , brought me 2 new issue
1) siri - sometimes can't awake when using speak command " hey siri " in charging mode
2) battery stability - Battery start behave strange after > 35% , can drain to 19 or less in a seconds, previous version able to sustain until 3% before the device ready to switch off, now the device dead in 19~10% force device to shut off , when put the charging cable to phone turn on with battery meter approximately 30% >
i have this issue quite sometimes after upgrade to latest version
3) app crash- the devices sometimes crash, quit the app or freeze but this rarely happen
hope can come out some version to fix above matters, which can be such annoying especially the second issue as highlighted.
thank

RESOLVED - I can't believe it, but I have actually figured this out.
Getting frustrated with going in circles, I decided to dig into security options. First off, I opened Windows' Properties for the start-up icon for InDesign. Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3). This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign. Low and behold, the option Window | Mini Bridge was now displayed! And it worked!
Sorry to have bothered you gentlemen with this problem. I really appreciate your assistance!
Mark.

ITunes will not open on Windows Vista after upgrading to new version

After installing the latest version, my iTunes will not open. I have uninstall and reinstall two times and still nothing, any suggestions or tips?

King Penguin set you on the right track. It's probably security software not recognizing the new version of itunes, and blocking it.
http://support.apple.com/kb/TS3125

Loss of playlists on iPod Classic after upgrading to new version if iTunes

Everytime I've upgraded to a new version of iTunes, I lose all the playlists (songs,videos,etc) from my iPod Classic. I have to re-sync everytime and with a lot of songs it gets annoying and I don't want to upgrade to new versions. Does anyone have a suggestion? Thanks.

I've seen this once before and deleting the playlist and recreating it with a different name solved it.
Also... try using disk utility to burn a data CD to make sure that burning generally works. Daft I know, but there you go.

Itunes 'corrupt' after upgrading to current version?

Similar Messages

Maybe you are looking for