ITunes could not be installed because some of the files are missing, please

I just bought an Iphone and when I went to install the latest version of itunes i get the message "iTunes could not be installed because some of the files are missing, please reistall iTunes" during the installation. I have tried every recommended solution I could find on the apple website. Does anyone know of a solution to this problem??

A number of people seem to have had this problem, see this thread:
http://discussions.apple.com/thread.jspa?threadID=1221432&tstart=0
In the thread you will find a post from Royb of Apple inviting people to send in installer logs. It might be an idea to take advantage of that.

Similar Messages

  • ITunes (11.3 64bit) cannot run because some its required files are missing. Please reinstall iTunes.

    just set up my new laptop lenovo x240.
    Windows 7 SP1.
    itunes 64bit 11.3
    first install went fine. then I tried to move my preexisting library. the library did not show the apps. so I tried around. Treid to re-install itunes.
    Since I did, after the re-install, iTunes gives me the error message "iTunes cannot run because some its required files are missing. Please reinstall iTunes."
    I tried the  -_> link: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    unfortunately it did not resolve. please, advise... I am quite desperate... and surprised this is happening, since I am on a clean corporate laptop.
    perhaps, can someone also steer me to a corner, where I can deactivate the cloud install pop-up ones starting iTunes?

    See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

  • OPEN DATA SET to write files in application server folder - some of the files are missing

    Hi,
    I'm using OPEN DATASET statement in batch job to write the files in application server. what i'm experiencing is when i schedule the batch job all the files are not writing into the folder.
    If i run the report again to write the missed files, the files are writing into the application server folder.
    after opening the dataset, i'm closing it. do we need to give any delay between creation of the files? or until the first write operation is done, 2nd one can't start ..how can we achieve this.
    Thanks for your help in advance.
    Thanks,
    Adi.

    Hello Bathineni,
    Are you using the sy-subrc check after the OPEN DATASET statement.
    If not use a sy-subrc check and transfer the contents to file only when the OPEN DATASET returns value sy-subrc = 0.
    if sy-subrc is 8 repeat the same loop say for 3 attempts until the OPEN DATASET becomes 0.
    DO 3 TIMES. <---- put any number of attempts as you need
    OPEN DATASET.
    IF sy-subrc = 0.
       TRANSFER contents to file.
       EXIT.
    ENDIF.
    ENDDO.
    CLOSE DATASET.
    Regards,
    Thanga

  • ERROR MESSAGE: iTunes cannot run because some of required files are missing

    I don't know how this happened but it all started when my friend was trying to send me songs from his iTunes thru Yahoo Messenger. I tried saving the songs to iTunesminiplayer.dll and iTunes.dll. Then I tried opening iTunes after that to see if maybe the songs would appear on my library. So then I discovered that iTunes won't open anyomore.
    The error message suggested that I reinstall but I'm scared that all my files would be deleted if do that..
    What should I do?
    Dell B130   Windows XP  

    nevermind.. i fixed the problem. =)

  • ITunes cannot run because some of its files are missing.  Please reinstall.

    Let me join the crowd of people voicinng about problems with iTunes 7.5. The above is what I get for an error message when I try to open iTunes. I tried to reinstall (selecting 'install damaged or missing files' when prompted) and had no luck.
    Looks like others are not having any luck uninstalling iTunes completely and reinstalling. Should I try this or just wait for a fix from iTunes? Before I uninstall, could someone reassure me that doing so won't wipe out my music files?

    Uninstall should not affect your music, however it is a good precaution to save a copy of your library files, iTunes Library.itl and iTunes Music Library.xml which are in your iTunes folder.
    A lot of people have found that downgrading Quicktime solves your issue, have you tried that?
    Uninstall Quicktime using the method in this article(just QUicktime):
    http://docs.info.apple.com/article.html?artnum=93698
    You can download the previous QUicktime from here:
    http://www.apple.com/support/downloads/quicktime72forwindows.html

  • Could not initialize Photoshop because a required text file is missing

    Hi everyone,
    Yesterday Photoshop stopped opening - I'td been going fine for years.
    Suddenly I get a sort of half hearted opening then it stalls on reading text global resources - goes blank then I have to close it.
    Running Photoshop CS (8) on windows XP plenty of spare room and ram etc
    I spent most of yesterday sifting aroundlooking for answers.
    I got a few suggestions.
    So far I have tried
    1. reloading several times
    2. scanning for any viruses  Malwares and AVG (nothing)
    4. defragging
    5. removing a lot of presets etc
    6. 2 system restores
    7. removing adobe photoshop prefernces.php file
    8. removing new doc sizes.php
    9. reloading again after removing these files
    10. taking contents of the whole Adobe photoshop preferences file and storing it somewhere else
    Nothing is working.
    There seems to be quite a few people with this problem but few answers
    Help!!!

    Thanks I cleaned out the whole system, uninstalled the entire Creative su
    ite (not just PS) then reinstalled the lot that seems to have fixed it (fingers crossed!!!)

  • Itunes could not run because some of its required files are missing. please

    After trying to run iTunes, I get the error message: "iTunes could not run because some of its required files are missing. please reinstall iTunes." It hasn't always done this, and I've had iTunes for years. Any ideas why it has just started now, and what I can do about it? Thanks

    have you tried reinstalling?

  • Cannot backup iPhone 3GS. Error Message: iTunes could not backup iPhone because iPhone Disconnected. What is the fix for this problem?

    Hi, I'm hoping someone can help me find a solution to my problem.
    When a backup is attempted, it starts off as if it's working, then stops and the following error message appears: "iTunes could not backup iPhone because the iPhone disconnected". But, the iPhone doesn't really disconnect! It must be some type of internal glitch.
    The iPhone is a 3GS and I have mostly pictures and contacts, two songs, a total of 33 apps. The iOS is updated (6.1.6). I do not know if this phone was ever jailbroke. I have been able to backup this phone before, but cannot now. The last backup was 9/21/13, it is now 3/2/14.
    Sorry if there is too much info, or not the correct info to find a solution!
    Also, I must say that although I am not a tekkie, I've seen many different types of various programs and I find that iTunes is not very intuitive...don't mean to hurt anyone's feelings, just my humble opinion.
    Thank You,
    Camp917

    Hey Lawrence,
    A big THANK YOU!! to you! Your suggestions worked!
    Before I changed USB ports (more on that in a sec...), I employed one of your suggestions that you gave to someone else with the same problem...and that was to clean the connector on the bottom of the phone with a soft dry tooth brush. I couldn't believe the amount of lint that came out! Especially what was found in either end...had to do some very careful picking. (Almost enough lint to knit a small sweater!!)
    Changing the USB port was the second and final step required for a successful backup. My computer is a laptop, and I did have a USB Bluetooth adapter (for another device) installed. I removed  the adapter, plugged the iPhone into that USB port, crossed my fingers...and it worked!!!
    Now if I can figure out the rest of this darn program, I might upgrade to a new iPhone!
    Again, thank you very much Lawrence!
    Rich

  • IPod won't sync - "Itunes could not copy (name of song) to the ipod (name of ipod) Because an unknown error occurred (-53)"

    I recently bought a used iPod Classic (my previous one was stolen). I still had my iTunes library on my computer so I was just going to hook it up and sync my library over, replacing what was on there from the previous user. When I first hooked it up to my computer (Windows 7 64-bit) there was a message saying the drivers were not installed properly. I un-plugged it, and plugged it back in to the same result. I tried 1 more time and didn't get the error message. I then opened iTunes and clicked on the iPod. I checked for updates, then clicked "Restore this iPod". Next, I set it up to sync music, and the sync began. It seemed to work for a while, the "Syncing iPod" message was displayed at the top, and it said it was copying songs over. It did this for about 10 minutes before I finally got the following message:
    "Itunes could not copy (name of song) to the ipod (name of ipod) Because an unknown error occurred (-53)"
    After that happens, everything seems to freeze up. iTunes says it's still syncing, but nothing ever seems to happen. If I click the eject button, nothing happens either. I eventually have to just disconnect the iPod. The iPod seems frozen for a while, then it seems to reboot itself (the gray apple window displays), then the interface displays and I can get to the songs on there. But, only a very small portion of my library makes it to the iPod. I've tried several times now and it always seems to be the same songs that DO make it onto the iPod. However, it's a different song listed in the error message each time, so it doesn't seem to be just 1 song causing the problem. Also, once I hook the iPod back to the computer, Windows displays a message prompting me to scan the drive and fix errors. I did it once and it said it found some errors and fixed them.
    I saw this thread: https://discussions.apple.com/thread/3924425
    and some people were suggesting removing everything from your library then re-adding it, in case the paths were messed up. I tried that and still got the same results. I also updated iTunes to the latest version, and I've tried different USB ports and 2 different USB cables.
    I also found instructions for a batch file you can run that, I believe, updates the iTuens DLLs, I did that as well but it did not help: http://support.apple.com/kb/TS1539
    What else can I try to fix this?

    bump (if that's allowed)

  • Syncing downloaded movies from itunes to ipad which then suddenly stops and will not finish the sync stating itunes could not copy  "name of movie" to the ipad because the file could not be written. restored the ipad to factory settings, reinstalled itune

    I have had to format my PC running windows 7, and reset my ipad 1 to factory settings, i then installed latest itunes on the PC authorised the PC and re downloaded several movies via itunes previous purchases, all was well until i tried to sync the ipad to the PC, only some of the movies synced onto the ipad, otheres stalled the sync stating itunes could not copy  "name of movie" to the ipad because the file could not be written. I have to pull the plug on the ipad just to get itunes to unfreeze, but it still will not sync these movies. and one help

    Hi
    I was having the same issue with music and movies but it had been ok before. The sync would freeze on a random file and then i had to take out the USB cable to clear it. After trying all sorts of things i saw someone mentioning about Anti virus and firewalls. I am using McAfee so i disabled it as a test. After this i could sync music and movies without issue!!!!! So in my case the firewall/anti virus was causing a problem. McAfee updates itself a lot so I am guessing something has happened in a recent update that impacted iTunes.I am not sure if this kind of thing is also causing your problem but it sounds very familiar.
    Hope this helps.

  • I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

    Hey guys,
    I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

    Select your iDevice in the iTunes.
    Choose the Summary screen (tab) and scroll to the bottom of the screen.
    Then un-select Encrypt iPhone backup.
    iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

  • I was just told ML could not be installed because apple HD is broken and could not be repaired. I never had any problem ever to suggest a broken HD, on my 2 yr. old mac pro. 10.6.8. Any one else having this problem? Will I get a refund,  if so how?

    I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
    Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
    How can I verify the status of the HD, in absence of symptoms for my own information?

    mottoo wrote:
    I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
    Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
    How can I verify the status of the HD, in absence of symptoms for my own information?
    The solution to your problem is rather simple
    1: Get a external hard drive and use Disk Utility to format it with a GUID partition map and OS X extended Journaled.
    2: Export your browser bookmarks and any other needed data to a file,. Copy your User data folders of Music, Pictures etc over to the external  drive via drag and drop copy methods, disconnect the drive.
    I don't advise using TimeMachine at this point since your boot drive is messed up, thus so will be your TM drive, just transfering the problem later on back to the new install. We are proceeding with a "Fresh install" method to eliminate as many issues as possible which a TM restore can return to a new OS X install.
    3: Next you will need to follow these instructions to zero erase (important) and install 10.6 fresh, use the same named account (different password ok)
    How to erase and install Snow Leopard 10.6
    4: Before you return files or install programs, Software Update fully and use the AppStore to install 10.8, this way it will be on a fresh 10.6 install, free of issues.
    5: Install any and all 10.8 compatible programs as much as possible before returning your User files, this is a performance measure.
    If you need too, use this site to find one's that are 10.8 compatible.
    http://roaringapps.com/apps:table
    6: Last install your user files from the external drive backup into their respective Music, Pictures, Movies etc., folders, into the same named accounts so you preserve your iTunes playlists. When you open those programs, they will update their respective support files automatically.

  • Adobe AIR could not be installed because another application is already being installed

    OS Windows XP
    If I try to start a new setup I receive the following message:
    "Adobe AIR could not be installed because another application is already being installed. Complete the first installation before proceeding with this one."
    This is the messagge when I try to remove Adobe Air 1.0 from Control panel:
    "Another installation is already in progress. Complete that installation before proceeding with this install."
    This is the log file:
    [2011-04-08:19:59:21] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
    [2011-04-08:19:59:21] Commandline is:
    [2011-04-08:19:59:21] No installed runtime detected
    [2011-04-08:19:59:23] Starting runtime install. Installing runtime version 2.6.0.19120
    [2011-04-08:19:59:24] Installing msi at d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
    [2011-04-08:19:59:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2011-04-08:19:59:27] Rolling back install of d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi
    [2011-04-08:19:59:27] Rollback complete
    [2011-04-08:19:59:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2011-04-08:19:59:28] Runtime Installer end with exit code 7
    In the past I had problems with a virus and I removed some voices on regedit. I think I've combined some mistake.

    Hi,
    I'm sorry you're having problems installing/uninstalling air.  Have you tried rebooting to see if that resolves the issue? 
    If it still fails, can you enable MSI logging using the instructions found on the following page and then post the msi log contents for review?
    How to enable Windows Installer logging
    Thanks,
    Chris

  • HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

    I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update.   Expect it's due to being at 10.9.1.  Mail is still teetering between dysfunctional and non-functional.  Advice?

    I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
    If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
    I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

  • Cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...

    cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...

    You should first uninstall iTunes completely.
    This is not an easy task!
    Read this article on how to remove iTunes completely
    http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
    Then download the latest version of iTunes for your Windows Version and install it.

Maybe you are looking for