Itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........
itunes could not connect to internet.. i have read all your solution but non help, include firewall, restart dns, check IE setting ETC... PLS HELP, my phone can't sync with itune...........
i could not do anything with itune, check updates, help. etc..
i am using windows 7.. and the latest itune, (previous itune also can't sync)
Similar Messages
-
does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx
Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
B-rock -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
Everytime I try to access the itTunes Store, this is the message I receive:
iTunes could not connect to the iTunes Store. The network connection timed out.
Make sure your network settings are correct and your network connection is active, then try again.
The internet connection is fine. I don't know how to fix this problem, and in the meantime I cannot connect at all to buy songs. Thanks for your help.I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us. -
Using a Mac, OSX 10.6.8; My internet connection is working properly, I can reach all sites via browser, yet I get the following message in iTunes: "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."
I have the same issue with almost exactly the same environment...
iPhone4S (32GB) running iOS5.0
Windows 7 Enterprise
iTunes 10.5.2.11
iPhone has been set up to wirelessly sync when on charge yet I get this error when the iPhone is not even charging!
I work for a mobile network operator and although this isn't something we support anyway, we would usually stumble across something like this when customers call us for advice prior to contacting the manufacturer for support, yet this hasn't been a call driver so I'd imagine this is isolated... (either that or not many people have updated their device and set up the wireless sync lol)...
Hey Apple! Any ideas? :-) -
why i see this massegae? (iTunes could not connect to the iTunes store. You do not have enough access privileges for this operation. Make sure your connection is active and try again.)
Hey there Hannuj,
It sounds like you are unable to access the iTunes Store in the iTunes application. Based on the error message I would try the steps in the article here named:
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/HT1527
Remove pop-up blockers
Some pop-up or ad-blocking programs may interfere with the ability of iTunes to connect to the iTunes Store. Removing them in many cases will resolve the issue.
Flush DNS Setting in Windows
In some cases, the DNS information you computer uses to connect to the Internet needs to be reset. Follow these instructions to flush your Windows DNS information:
Windows XP
On the Start menu, click Run.
In the Open field type cmd and click OK.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
Windows Vista and Windows 7
On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and chooseRun as Administrator from the shortcut menu. If Windows needs your permission to continue, clickContinue.
In the resulting window, type ipconfig /flushdns and press Return on the keyboard.
You should see a message that the DNS Resolver Cache has been successfully flushed.
Note: If, in the command prompt, you see this message: "The requested operation requires elevation", close the command prompt and repeat steps 1 and 2 above to be sure that Administrator privileges are used to access to Command Prompt.
See the following articles for additional troubleshooting information on connecting to the iTunes Store:
Can't connect to the iTunes Store.
iTunes for Windows: Network Connectivity Tests
Thank you for using Apple Support Communities.
Regards,
Sterling -
iTunes RADIO is not working.
“iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
Simply put, firstly, I can't connect to the internet when I click on Radio. People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
===============================================================
NOTE: no password for iTunes exists in my Keychain. Is this a problem?
Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
Apple store id It works via direct internet connetion but not through iTunes. Very strange.
===============================================================
FYI, Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C0*******F8V
Sudden Motion Sensor:
State: Disabled
Intel 6 Series Chipset:
Vendor: Intel
Product: 6 Series Chipset
Link Speed: 6 Gigabit
Negotiated Link Speed: 6 Gigabit
Description: AHCI Version 1.30 Supported
M4-CT512M4SSD2:
Capacity: 512.11 GB (512,110,190,592 bytes)
Model: M4-CT512M4SSD2
Revision: 040H
Serial Number: 0000000012330912E75A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
disk0s2:
Capacity: 511.25 GB (511,250,432,000 bytes)
BSD Name: disk0s2
Content: Apple_CoreStorage
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 600737FB-7A29-3BAE-859E-CBFE2E90C39A
<Edited by Host>This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
Itunes 11.1.5
Mac OS X 10.7.5
IPhone 4 7.0.6
IPhone 5 7.0.6
Ikeep getting this error when I attach the new phone. After it would not work I did a Icloud back up of my old phone and restored it on the new phone, but I have other music and apps on my Itunes that I would like the option to sync and I like to be able to backup my phone on my Mac. What do I need to do to get the new phone attached back to this itunes?
iTunes could not connect to this iPhone. You do not have permission.Im having the same problem after installing ios7.1
Checked the usb status and it sees an iphone ( 4s ) attached,
Repaired disc permissions
updated and reset iphone
and itunes
reinstalled mavericks from scratch
phone alert saying " TRUST THIS COMPUTER?"
hit trust
same alert keeps appearing
again and again
itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
what the actual F*** is going on and can anybody help ?????? -
Since my iPhone 4 updated I can no longer sync it or charge it with iTunes I get an error message ------>iTunes could not connect to this iPhone. An unknown error occurred (0xE000084)
From this support document http://support.apple.com/kb/TS3694 see this:
Unknown Error containing "0xE" when restoring
To resolve this issue, follow these steps. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. Learn about issues syncing iOS devices with P55 and related Intel Chipsets. -
I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.
If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?
Quit iTunes, restart your computer, reset the iPad and try again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
what can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
when i connect my iphone to my pc i get "itunes could not connect to this iphone. An unknown error occurred (0xE8000012) i have the correct itunes i also tried to reset my phone, i did this before i went to bed and it was still trying to reset when i woke the next day should it take this long?
http://support.apple.com/kb/TS3221
-
itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync
Actually I'm the nanny of a 6 year old girl. And is her iPad, my boss needs that this iPad work again because the little girl is making everybody crazy. Please helpppppppp
Maybe you are looking for
-
thanks to everyone for the many-varied-suggestions... But the answer was that my monitor was in it's 1st throws. It finally went black screen, no dot, I replaced it, and bingo presto, the computer sleeps just fine, and there's no funny error mesgs sh
-
Jpegs on websites are coming up with a yellow cast. Anyone else?
[https://picasaweb.google.com/113120418431036860907/January252012?authkey=Gv1sRgCNHp6eKIod_1Zw#5701590386477063250 Example at Picasa]
-
How to create Transfer order from material document uFF08Move type is 101uFF09
Hi all, is there any function module, BAPI to create transfer order from a material document number? I want to use FM L_TO_CREATE_SINGLE,but the result is "Movement type 101 for manual transfer orders does not exist". Is the parameters error? Thank y
-
Variable-Selection before running the report
Hi Bex experts, i have a Web-Report with Navigation block. Before user run the report he should enter a value for Profit Cetner. In Query definition, I defined a simple variable ( typ: user entry/default value). Profit center has an attribute u201CSt
-
How to move EP installation from one server to another server
Hi All, we have a EP server installed. Now we have to move this EP instance onto a different machine. The source and target hardwareosDB would be the same. Can some one tell me how to do it. Is Homogeneous System Copy a solution for this. Or I have t