ITunes could not connect to iTunes store.  The Host is down.

I'm trying to connect iTunes to the the iTunes Store to update the software and access my library online.  I keep getting this error message even though I have full Internet access since I'm online typing this right now and I have email via Mail and Outlook and I can use Safari or FireFox to connect to the Internet just fine.
The message box also includes " Make sure your network connection is active and try again. "
Any suggestions / help would be much appreciated.

Resolved.  Found that Little Snitch Firewall was accidentally marked to deny connections to iTunes Store.

Similar Messages

  • Itunes could not connect to the itunes store the host is down

    I have a power mac and when in Itunes I click on "Store" I get an error message that reads "Itunes could not connect to the Itunes store. The host is down."
    Well I know my internet is working because I am writting this message does anyone else ever have this problem.
    Thanks.
    t

    Hi tgflare,
    If you are having difficulties connecting to the iTunes store you may want to go through the troubleshooting steps detailed in the following article -
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • TS2776 I get a message that says"ITunes could not connect to IPhone becuase the pairing record is missing" I never saw this error message before. Anyone knpw what's up?

    I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??

    Do you still get that one if you restart the PC and try to connect again?

  • After update ios 7.1 Could not connect to App store

    Last night i updated my ipod 5g to  ios 7.1.But this morning i could not   connect to App store or iTunes Store.
    Any solutions??

    See what you did not yet do here
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.

    In our R12.1.3 EBS, on RHEL 5.5, 64-bit, we are getting this error -
    adstrtal.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
    However, neither the db is down nor the APPS password is wrong. I am able to connect from sqlplus from application tier. And also from the 10.1.3 home. I have checked similar threads here but none helped. Raised an SR yesterday but that too hasn't helped yet.
    Any ideas?
    Regards,
    Vinod

    please post he output of
    SQL> show parameter sec_case_sensitive_logon
    $ECHO TWO_TASK
    clean FND NODES
    How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
    Check if all services are down on application node, no process should be running.
    shut down db listener and database
    reboot the server
    start or reload listener on DB node and start the database
    Run autoconfig on db tier -- make sure it completes successfully.
    Run autoconfig on all apps tier -- make sure it completes successfully.
    Now, try to start applications on middle tier.
    ApPsMaStI
    sharing is Caring

  • Unable to start T-sql Debugging . could not connect to computer'.'.the workastaion service hase not been started

    hello
    when i excute code in sql server 2008, this error appear:
    unable to start T-sql Debugging . could not connect to computer'.'.the workastaion service hase not been started.
    what do i do?
    thanks

    hello
    when i excute code in sql server 2008, this error appear:
    unable to start T-sql Debugging . could not connect to computer'.'.the workastaion service hase not been started.
    what do i do?
    thanks
    Hello,
    This forum is to discuss and ask questions about the Debugging tools of
    Visual Studio, Visual Studio Profiler tools, and Visual Studio Ultimate IntelliTrace, it seems like that your issue is out of the support range which is regarding
    Using the Transact-SQL Debugger, if that is the case, I would recommend you post this issue in the following forum like this thread
    Unable to start T-SQL debuging.
    SQL Server>Transact-SQL
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me

    I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me? How can I fix it?

    Hi, clara_from_brazi.
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.  Also, test connecting the external storage device to the computer with another cable as this can be the issue.  
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Apple Computers and Displays: Powering peripherals through USB
    http://support.apple.com/kb/HT4049 
    Cheers,
    Jason H.

  • ITunes could not connect to Music Store. The network connection was reset.

    For 3 days now i've been unable to connect to iTunes music store, every time with the same error message (above). Yes I'm connected to the internet, no I do not have this problem with any other software/site.
    I miss my music ;(
    - Thank You,
    - reknit

    Ok, this is an update and then I'm going off to bed, so if anyone has any bright ideas I will see them first thing.
    I now wonder if limewire may be the problem, even though it is 'listening' currently on port 33782 which is nowhere near to iTunes or anything else for OS X. Why? Because up until today, I could only connect to limewire during the daytime - evenings and weekends it wouldn't connect and discussion forums suggest that tiscali (my ISP) is one of the worst offenders for blocking UDP traffic at peak times and may be specifically targeting limewire. Today, when I have had the problem with iTunes Music Store, I have been able to connect to limewire all day and all evening, no problems.
    However the problem with this theory is that when I could connect previously to limewire only during the day, I could still connect to the Music Store as well at the same time. So it may be irrelevant.
    I have checked everything else from the article - the discussion boards, keychain access, firewall, it all checks out. So if anyone has any ideas about this, I'd be very happy.
    iMac G5 17" 1.5Gb RAM   Mac OS X (10.4.9)  

  • I installed itunes 10.5 in my PC to sync with my ipod touch 4G but it's giving me error that itunes could not connect to itnues store.Make sure network connection is active and try again...I'm connected to internet though, please help!

    I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • ERROR MESSAGE 401 - ITUNES COULD NOT CONNECT TO MUSIC STORE

    I've rencently tried to download some tunes from the Music store but keep getting this error message:
    "ITUNES COULD NOT CONNECT TO THE MUSIC STORE - AN UNKNOWN ERROR OCCURED (401)"
    "MAKE SURE YOUR NETWORK CONNECTION IS ACTIVE & TRY AGAIN"
    This message happened before I downloaded the latest version ofITunes & is still happening after the download!
    I've checked all possible settings & everything is fine
    What is going on????
    DELL   Windows XP  
    DELL   Windows XP  
    DELL   Windows XP  

    Problems connecting to the iTunes Music Store usually stem from issues with the Windows firewall, a privacy filter (such as Mcafee) or a download accelerator. Start here:
    iTunes for Windows: Overview of Music Store Errors
    for some basic tips to start isolating the cause of the problem. Your ISP (or your network administrators if you're on a company network) may have also changed something that is now blocking access.
    Hope this helps.

  • ITunes could not connect to Music Store

    Okay here's my problem: When I downloaded the newest version of iTunes, it wouldn't open after the download was complete. So I went into the discussion about iTunes not opening and found this msconfig thing that you could do in order to make your computer start up differently. It told me to go to Start, click on Run. Then type in msconfig and hit enter. And after that I needed to change the startup selection to 'selective startup' and deselect 'load startup items'. Then I was supposed to go to the Startup tab and select only qttask and iTunesHelper. Next it told me to go to the Services tab and make sure that 'Hide all Microsoft Services' was selected. And Disable All. Then it told me to select iPodService. Then click okay and restart my computer. Now after I did all of this, iTunes opened. But when I tried to play my purchased music it gave me a message that said 'This computer is not authorized to play '_' (it said the name of the song here). Would you like to authorize it?'. And below there it had a space for me to type in my password, but my Apple ID was already typed in for me. So I did it correctly and typed in my password and clicked on Authorize....then I got an error message that said 'iTunes could not connect to the Music Store. The network connection was refused'. I just figured that I typed in my password wrong and clicked on the purchased song again but this time I clicked on forgot password, but then got the same error message. It's been a difficult for the past few weeks not being able to listen to my favorite music. Could someone please help me, I have no idea what I'm supposed to do now. I tried calling Apple Support, but since you are only able to use it for 90 days, they wouldn't help me. PLEASE HELP ME!!!!

    Hi, I get the same error when I try to connect to Music Store or even get the songs info from my original Cd's, like song info and album art, it shows:
    iTunes could not connect to the Music Store. The network connection was refused.
    Make sure your network settings are correct and your network connection is active, then try again.
    I did try everything, I checked the windows firewall, the antivirus program's firewall, the LAN's router configuration and in all of them Itunes and all the Ipod related programs have permission but it still can not connect to the music store. Is there any way to solve this?
    Thank you
    Pentium 4   Windows XP  
    Pentium 4   Windows XP  

  • COULD NOT CONNECT TO NOKIA STORE

    Hi All,
    when I try to connect to Nokia store via my mobile phone Nokia C7-00  it says first Nokia Store Update Required (versiob 3.30.018-21.1 MB)
    I download it couple of times and once it try to install it says update error...
    So I was trying to up date it via my lap top(windows 7)
    whene I try to connect thru Nokia Suite it says could not connect to server
    I did check all my fire wall setting no success...
    any one can help Pleaaaase.

    If you need to complain directly to nokia you need to write a good old fashioned letter to the nokia office in your country. As an example I know people in the UK who have had good return communication and good end results after doing this. I believe it's a legal requirement that all written complaints have to be replied to in the UK, but not totally sure.
    You can get the address by contacting nokia care by telephone and asking them for the complaints address.
    Be aware though that nokia will never directly supply you with spare parts that are not designed to be changed by the end user. It is totally against their policy, just like many other manufacturers.
    The only sources of parts to the end user are online stores or ebay but fitting is always at your own risk and cannot be discussed here.  Some totally independent (not chains like CPW) care points may also supply parts, at their discretion.

  • ITunes could not connect to music store. An Unknown error has occurred.

    I get the above message when I try to log into the ITune store. The error code that I get is -9813. My password is current and my account is current and I followed all of the other suggestions such as:
    1. Resetting the date and clock on the computer.
    2. I replaced the mother board battery so I won't be affected by the above problem.
    3. Unplug the modem and the router then start the computer back up to make sure that there are no problems with these two items.
    4. I am running the latest version of iTunes 6.0.5
    5. I can log in from another MAC (power book) using my account so it isn't the ISP blocking me from phobos.apple.com
    So far this has been happening for a few days and is very frustrating. Any ideas will be appreciated. I will also check with the Genius bar at the local apple store to see if they have any ideas.
    G5   Mac OS X (10.4.7)  

    No follow up

  • Itunes could not connect to store, the network connection was refused.

    Safari doesn't work either because it "could not connect to server" but the wierd thing is that Mozilla Firefox works.
    Could someone help me out??
    Thanks

    For all who are still fighting this problem. I figured out why it stopped for me... Web Proxy was set (turned on) for the local machine (127.0.0.1).
    I had installed and subsequently removed the trial version of KidsGoGoGo, a parental control application for MAC. I had tried everyone elses suggestions for fixing this iTunes Store connection problem - all to no avail. I last tried the OpenDNS solution which also did nothing... Although I may stick with it to see if it truly speeds up name resolution. Changing my DNS entries reminded me that one of the steps in configuring KidsGoGoGo was to set up web proxy to point to the local machine (127.0.0.1). I looked at the settings there, and realized it was still set. I removed the check for web proxy... and now all is well.'
    Hope this helps someone else.
    Regards,
    Michael

  • Could not connect to repository (JDESSELocal)

    Hello,
    I'm trying to connect to a Repository in ODI through SQL Server 2005 for JDBC driver and I get the error "Could not connect to repository". The database is an SQL Server 2005 installed by a E900 fat client package. See more detail below:
    Invalid Repository Connection:
    oracle.odi.core.config.MasterRepositoryDriverClassNotFoundException: ODI was not able to load the jdbc driver class provided on MasterRepositoryDbInfo. Please check that the driver class name "com.microsoft.sqlserver.jdbc.SQLServerDriver" is correct and that this driver is available to ODI classloader.
    Regarding the Repository Connection Information, I populated the following:
    Login Name: Test ODI
    User: SUPERVISOR
    Password: SUPERVISOR
    User: OBIEE_ODI_REP (also tried with "sa")
    Password: E1admin
    Driver List: Microsoft SQL Server 2005 Driver for JDBC
    Driver Name: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Url: jdbc.sqlserver://localhost\JDESSELocal\JDESSELocal:3372
    When I click on Work Repository help, the mentioned error appears. Any clue ?
    Thanks in advance,
    Diego.

    In SNP table, there are multiple entry for one row. like i have only one master but it gets two entry for it. I just delete one row and got suucess to login.
    Thanks

  • Could not connect to AIM. Change port doesn't help !

    I have been using ichat for about three months without any problems.
    It is tonight (22/10/06) that I cannot login while I was able to connect to the server in this morning. Nothing has changed in my router configuration.
    The error message is "Could not connect to AIM. The specified host cannot be located.
    I did search the forum here. The suggested solution is to change ichat port to 443 or 5191. It does not work for me.
    At first I thought the server was busy. But I changed my mind since my friend can login.
    My internet connection works normally. Nothing seems broken.
    Oh another thing is both my username before @mac and passwords is 9 characters.
    Please help.
    Macbook   Mac OS X (10.4.7)  

    Hi Omegaxxx,
    At this stage I would try this.
    Down load IPNetMonmitorX
    It is free as a trail for a number of days.
    Get it to do Port Scans on the UDP ports that iChat uses.
    Do these one at a time for Ports 5060, 5190 and 5678 and then repeat for the group of twenty (16384-16403)
    Now test it for TCP port Scans. (just port 5190 for AIM/@mac)
    This will be the one to tell if the Login is working or not.
    Repeat for any other port you have tried iChat to login with. (The AIM servers will allow login on almost any port: 443 is regarded as more secure as it is used for some Mail apps)
    You will need to test to a specific IP address.
    Use the ones listed by Ryan above.
    If you are on a University or other large campus like a large business it may be that they have blocked the ports at a fairly local level.
    If you opened the ports in your connection device with Port Forwarding and it is also using DHCP then check your computer is at the same IP that the Port Forwarding is pointing to.
    9:23 PM Friday; September 22, 2006

Maybe you are looking for

  • Add new price condition in an order

    Hi In a sale order, we want to add a new condition price when we do a new detemination of a price. This new condition is manual.. this due to we receive edi1 (cucstomer expected )prices by idoc and that in some cases this condition is not populated.

  • In i movie, zoom in on still photo & then freeze it.  is that possible?

    in imovie, i want to zoom in on a photo & then freeze it at the end of the zoom for a couple of seconds.  is this possible with imovie?

  • ORA -1031 Error while connecting to RMAN, RMAN connection

    Hi Guru's I am getting the above mentioned error when trying to connect to RMAN. I recreate the password file as well. and check the user is a part of dba group As i am going to connect with user sys so the user have all the required privileges. Can

  • Group Policy Editor problem

    Hi I updated Windows 7 SP1 Enterprise 64 bit with the Windows Update. Now, when I open the Group Policy Editor, this window is displayed with the following error message: How come? Thanks Bye Balubeto

  • Windowsのrunasコマンドでアンインストーラがループする

    DomeinUser権限でも実行できる削除用のスクリプトを作っているのですが runasコマンドで[uninstall_flash_player.exe]を実行するとループします. runasのオプションやcmd,vbs,ps1経由やatコマンドによるタスク登録も試しましたがループします. CUIでの削除ルーツ利用方法.またはFlashPlayerの良い削除方法があれば教えてください. GUIからの管理者権限昇格であれば削除できるのですが. ユーザー権限で削除できるようにしたく考えています. ■