ITunes could not connect to the iPad "Bob's iPad" because it is locked with a passcode. You must enter your passcode on the iPad before it can be used with iTunes.
i cant reset my i pad it wont let me
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
I have a 3rd generation i-pod touch ......cant get the slider to slide to put the passcode in .....the message says (i-tunes cant connect to the i-pod because it locked with a passcode ,you must enter your passcode on it before it can be used.)...... I cant slide the slider to put the passcode in what to do?
iOS: Unable to update or restore
-
itunes could not connect to the iphone because it is locked with a passcode...
I hit this problem when updating my iPhone. I was about to put it in recovery mode (http://support.apple.com/kb/HT1808) and restore it but first I tried updating iTunes. Suddenly the phone sprang back into life!
-
please reply me
You've entered your passcode on your phone to unlock it ? If you can't remember your passcode then follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled.
-
PPlease pleas help me
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
please someone tell me what to do i have no idea where to put in the passcode let alone know what it is! and i need it because i need to sync all my contacts and apps and everything onto this new iphone
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
appreciatedPlace the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I am trying to restore my son's iPod Touch 4th generation. I went about 20 minutes into the recovery process and got the error message, iTunes could not connect to iPod because it is locked with a passcode you must enter your passcode on iPod before it can be used with iTunes. The whole problem started with my son putting in a password that he has now forgotten. How do I get passed this?
its the 1st time ive heared of this
can u link it to an computer to add music?
if so you should be able to restore it
connect to itunes under the devices tab click on the ipod now click summary on the top
on the page you should see and check for update's or update tab
below that there should be an restore tab just click on the restore tab
NOTE RESTOREING WILL DELETE EVERYTHING YOU ADDED TO THE IPOD AND IT WILL BE BACK TO FACTORY SETTINGS -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."PHONE LOCKED
If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212 -
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
iTunes could not connect to the iPhone “Rasmus's iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes. - Why is that?
iTunes is asking you to provide the passcode that was created when the device was activated.
You are able to get around the passcode if you know the apple id login and password and are able to restore the device back to default settings.
See this article for further directions:
http://support.apple.com/kb/HT1212
good luck.
Maybe you are looking for
-
Itunes 11.0.2.26 sees tunes no longer on my iphone
Hi, I successfully loaded a .wav file onto my iPhone 4 through iTunes 11.0.2.26. I successfully loaded an AAC version of the same file onto my iPhone 4 through iTunes 11.0.2.26. I deleted both of the files from my iPhone by using the "swipe to the ri
-
ITunes Match will no longer let me add my PC... Help?
iTunes Match will no longer let me add my PC. As it is, about 50% of the time that I have opened iTunes for the last year, I've gotten an error stating that iTunes Match has encountered an error and I would need to re-login. This is on my main PC,
-
I don't want to restore photos from icloud onto my new iphone
Hi there, I had an iPhone 4 and just got a new 5c. I backed up my 4 to icloud as i dont't own a laptop. I bought 20GB of storage and everything seemed to work. When I set up new iPhone i selected 'Restore from iCloud Back up' as I need old contacts o
-
How do I get rid of clear history pop-up everytime I close a tab or page?
Recently, I believe after updating to Firefox 33.1, I began to get a pop-up window for handling cookies,cache, browsing history,downloads etc. every time I close a page or tab. This is super annoying as I thought that I set-up those functions to be d
-
How to create database in express edition
I have downloaded and installed Oracle10g Express edition. As the tutorial suggests using windows /start/all program/oracle10g Express edition/go to Database home page, I am able to login as well. My problem is How can I create a new database in orac