ITunes could not connect to the iPad "Micah's iPad Air" because the device timed out.

After using my ipad air for the last week, I plugged it in for the first time to back up some videos. I get this message: iTunes could not connect to the iPad “Micah's iPad Air” because the device timed out. Any ideas?

Eject your iPad if you haven't already done so. Quit iTunes and restart your computer. Reboot your iPad and then try again, use another USB port on your computer, of you have another free port available,
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

  • TS3212 iTunes could not connect to this (my) iPhone (or iPad)? An unknown error ocurd (OxE8000003)

    I cannot connect my iPhone and iPad to iTunes because of unknown error OxE8000003.What I have to do in order to connect my devices to iTunes?

    Try the following document:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?

    I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?

    Quit iTunes, restart your computer, reset the iPad and try again.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1212 My ipad displays the message ipad is disabled- connect to itunes. When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!

    When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!

    Hi mChelle,
    Follow the instructions that best apply to your situation in the link below:
    http://support.apple.com/kb/HT1212
    Cheers,
    GB
    Oh - I see that you have that article linked to your post above. Read the entire paragraph in item #1. It tells you what to do if it is asking for a passcode.

  • Itunes could not connect to the ipad because an invalid response was received from the device

    Hello
    I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
    However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
    "Itunes could not connect to the ipad because an invalid response was received from the device"
    I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
    I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
    I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
    It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
    Thank you for your help!
    System specs:
    asus rampage v extreme motherboard
    OCZ vertex 4 SSD
    8 Gb DDR3 RAM (1600 mHz)
    windows7 x64
    Intel i7 3.5Ghz 1155
    nvidia GTX295  (x2 running in Sli)

    I fixed this problem.  Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
    My iPad 2 would no longer sync with my old  PowerPC Mac mini running MacOS. My iPhone 3GS synced fine.  IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes.  I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
    iPad 2 used to sync prior to iOS 7 installation. 
    Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
    Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could.  )
    all good now.

  • HT201263 itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync

    itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync

    Actually I'm the nanny of a 6 year old girl. And is her iPad, my boss needs that this iPad work again because the little girl is making everybody crazy. Please helpppppppp

  • I bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me

    i bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me !!?

    Your iPad is syncd with iTunes on your computer and your iTunes account controls what's in your iPad.   Previously it must have been sync'd with another person's iTunes account in which case you need to completely clear it out to make it your own.
    Go to Settings > General > Reset (at bottom) > Erase All Content and Settings
    Then plug it into your computer and restore it with YOUR iTunes account.
    Or if your have an iTunes account already setup under your name with your own apps and media -
    Plug it into your computer, open iTunes if it doesn't open automatically and on your iPad page, click Restore
    Let it proceed.  Then the iPad will no longer be looking for someone else's account.

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • ITunes could not connect to the iPad because it is locked with a passcode.

    I just bought a 64GB iPad in France on my journey. In Denmark we haven't got it yet, so there's no support for me yet...
    In the french store they let me connect to iTunes on one of their Macs, so I could enter my new iPad. Then I played with it the rest of the day (didn't sync with my MacBook, cause it is being fixed) and also put in a pascode as I do with all my devices.
    Next morning when I turned it on, it only showed the "connect to iTunes" symbol again, as if it was new. And when I connect to iTunes, iTunes only says "iTunes could not connect to the iPad because it is locked with a passcode. You must enter your pascode on the iPad before it can be used with iTunes"...
    And that is a contradiction! I can't do what the iPad says and i can't do what iTunes says...
    Any ideas? Any ways to reset it other than by holding down both buttons at a time, because I have tried that already.
    Hopefully someone can help me, I really want to be able to use my new iPad

    pathfinder172Jun 1, 2014 8:05 AM Re: iTunes could not connect because it is locked with a passcode...?
    Re: iTunes could not connect because it is locked with a passcode...?in response to rhmcolvin
    I have a much easier possible solution!!
    I had this same issue, trying to connect my new iPhone 5s to my Windows computer's iTunes. I was getting two different error messages:
    - iTunes could not connect to the iphone because it is locked with a passcode
    - iTunes could not connect to the iphone because the device timed out
    I found this thread, but did not like the idea of having to restore my iPhone and losing all my settings/data on the phone. After trying several different things, I discovered that I had 5 devices listed under my "Devices" that were authorized, so the real issue was that I had reached my limit. I had several issues with my old iPhone 5s, and had to have it replaced twice. As a result, I had several old iPhones listed under devices that I no longer had. Erasing those solved the problem, and my new phone connected just fine to iTunes. To get rid of the old devices, you can:
    Open iTunes
    -> click on "store" in the upper left corner
         ->  from the drop-down menu, select "view account"
              -> enter your password
                   -> under "iTunes in the Cloud", click on the blue "Manage Devices >"
                        -> remove any old devices
    This solved my problem. Hope it helps others as well!

  • HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Error message "itunes could not connect to the ipad because an invalid response was received from the device".

    Hi, I am having problems with itunes and my ipad........
    I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
    "itunes could not connect to the ipad because an invalid response was received from the device"
    I have done all the Apple support ideas including re-installing itunes twice but no joy.
    It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
    I have run msconfig and disabled everything but still no connection.
    Anyone got any ideas?????

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom
    Did you get an error message number? See this similar post.
    https://discussions.apple.com/message/24102115#24102115

  • Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out.  ??

    Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out.  What is the likely problem???

    Eject the iPad, quit iTunes, restart the Mac and reset the iPad and try again. Use another USB port on the Mac if you have a free one to use.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up.

  • ITunes could not connect to the iPad because the devise timed out

    iTunes could not connect to the iPad because the devise timed out

    That's not unusual. The USB ports on your computer most likely do not have enough power to charge the iPad efficiently. The device may in fact be charging, even though you may be getting a message otherwise, and even if it is charging, it is a very slow trickle charge and will take much longer to fully recharge the battery.
    Take a look at this.
    Charge the battery in your iPad - Apple Support
    I'm glad that you were able to get the iPad to sync.

  • When I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

    when I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

    If you are using Windows 7, go to:
    Control Panel>Programs>Programs and Features
    Look for a program called 'Apple Mobile Device Support'
    Right-click on it
    Click 'repair'
    Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me.

Maybe you are looking for

  • Is fast boot not working for you? This is how you get it working correctly...

    Ok so after two days of trying to register on this site, the 50th activation email finally worked... Anyway I was trying to figure out why fast boot wasn't making much of a difference it seemed like once it booted quick but may have just been random.

  • Odd Wiki Authentication Behavior

    We are running OS X Server 10.5.5 with Open Directory bound to an Active Directory install. Our wiki is limited to authorized users only. Users come from both AD and OD. The site is running under SSL because we have turned on clear text authenticatio

  • Quality Based Invoice

    Dear Experts, Our clients wanted to go quality based invoice,  the following steps i made for the process, 1. In OQB1 I have set  invoice control key 0007  & assigned in material master and activated. 2. And message set in MM Invoice M8 280 When i do

  • Best Settings for X-Fi w/ an Inspire T5900 5.1 sys

    What would be the best settings for an X-Fi Xtreme Music with an Inspire T5900 5. surround speaker system? Please inclue all information and settings on the system please... I use it for Gaming and Music also . Thankyou for your time.

  • How to install secure-legitimation/e-legitimation??

    Hello!! I can´t install/use telias secure legitimation (e-legitimation) with either safari or firefox. Can anyone tell me how to do? It´s Telia and SEB-bank that I´m using. Thanks in advance! //Virrig