ITunes crashed and now i cannot start my Macbook up

Hey, i just purchased an iPhone 4 today and upon setting it up with my iTunes, my Macbook crashed, it was totally unresponsive. So i held the power button down until it switched off. Now when i try to turn it back on it just stays at the grey apple loading screen, i left it there for 15 minutes and it was still there! HELP!

If you haven't tried, startup your Mac without the iPhone connected.
Help here > Resolve startup issues and perform disk maintenance with Disk Utility and fsck

Similar Messages

I have updated to Itunes v11. Now I cannot start Itunes from my computer

I have updated to Itunes v11. Now I cannot start Itunes from my computer. I have tried clicking both on the short cut icon, the program file and the application file. The hour glass appears for a second then nothing. I have tried copying an audio disc and nothing happens.

Are you getting an error message number with your unknown error? If so, what's the error message number, please?

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

Hey there MattSK123,
Thank you for your question. It sounds like you are unable to see either of your devices in the sidebar of iTunes after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If the issue is not resolved, I would next re install iTunes from either of the following articles depending on the version of Windows you have:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Or
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
Take care,
Sterling

Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!

Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!

Security questions:
https://discussions.apple.com/docs/DOC-4551

Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??

Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??

Start by doing an SMC reset http://support.apple.com/kb/HT3964 and see if that resolves it.

Installed latest itunes update and now I cannot save my Microsoft Word and Excel files. It lets me open them but I cannot save them.

Installed the latest itunes update and now I cannot save my Microsoft Word and Excel documents.

Installed the latest itunes update and now I cannot save my Microsoft Word and Excel documents.

I deleted my launchagent by mistake and now I cannot start my Imac

By mistake I deleted my launchagent and now I cannot start my IMac, can anybody help me

wasemthedream wrote:
the cd is os x 230.1.2
I have no clue what that means. If you are the owner of the iMac, which OS is currently installed? Since it appears you have a CD what color is the label and which OS is showing on the label?
CLICKY CLICK---> http://support.apple.com/kb/HT1159 Mac OS X versions (builds) for computers
I cannot start the Imac up, it goes straight to grey screen.
I know my pasword and everything but its telling me that its not the id I bought it with and I never had or used any other
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

I attempted to update itunes (Windows 7) it didn't work, after several tries I uninstalled itunes completely, and now I cannot get it to reinstall correctly. help?

Had issues upon updating iTunes to newest version (11).
The display settings were not working, I tried to run it in compatibility mode for Windows 7 Service Pack 2, which i'm currently running.
Still had major issues, couldn't click anywhere on the iTunes window, the only thing I could click was file but even then the dropdown menu wasn't working correctly.
I tried several times to adjust my computers' settings to accomodate the new version, and still nothing worked.
I got fed up, and uninstalled the lastest version and now I am having trouble reinstalling.
I tried the latest version a few more times, and now when I click download on the site link, it doesn't even prompt the download window in Mozilla.
It doesn't create a location anywhere within my computer either.
I downloaded 10.7 in hopes of that maybe working, I figured because I haven't updated the iOS on my phone, and my computer is still a little behind that this might help, but it says,
"itunes library.itl cannot be read" and something to do with having a new version of the file already.
I just want to have some version of itunes on here, I still have Bonjour, though I think with the issues I am having the Software update must be gone along with any itunes program I previously had.
I cannot restore any previous versions because I haven't backed it up on to anything for quite some time.
I just want to manage my iPhone 4 again, and this is driving me nuts.
Any help is very appreciated,
thanks for reading.

The Problem is resolved by :
Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Thanks to my friend Sunil.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec

ITunes crashed and now acts like it's newly installed.

The library is there, but iTunes doesn't see it. I mean, I can import things from the library, but for instance I had to import my podcasts, and now it wants me to subscribe to them. (I may have imported it wrong anyway.) If I have to import all my music, folder by folder, I'm going to be at this for a while.
So, to the hive mind; what went wrong and can it be fixed?
Thanks for any help.

For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Firefox crashed and now will not start. Cannot create new profile or start in safe mode because Mozilla Crash Reporter appears and will not restart.

Browing the web, Firefox crashed. Typical "this is embarrassing" window appeared and I could choose to restore or start new session. I tried to restore, and nothing happened. Mozilla Crash Reporter appeared, the option to quit Firefox seems to work but restarting just brings back the Crash Reporter. I tried uninstalling and reinstalling Firefox, but Crash Reporter persists. I tried looking through your articles on crash on startup, but I cannot open Profile Manager, nor start in safe mode, nor anything else, with that Crash Reporter popping up. I can't give you a crash ID as I can't type anything into Firefox address bar if I can't open the program. I'm running Windows 7 starter edition on a netbook. Honetly really only use Firefox on this machine, so help would be appreciated! Thanks.

Maybe you did't understand my previous statement. There are no crashes in FF 3.6, There is no previous evidence FF 14 was ever here, I completely uninstalled all trace of Firefox, no app data, no preferences, no cache. I will upgrade to FF14 so I can send IDs,
so here ya go.
Crash ID: bp-fa9da320-92dc-47f7-afff-33e702120718
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342655269
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342655256
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342655256
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/14.0.1/whatsnew/?oldversion=rv:1.9.2.13
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed.

Mac Pro - crashed and now won't start up, stripes on screen + kernel panic?

My computer apparently crashed while the screensaver was up (I was away for 10 or so mins, just Firefox and World of Warcraft in windowed mode running), as it was showing a black screen with a fuzzy whitish line along the top and was completely unresponsive. Unusual, but nothing to freak out about.. right?
So I did the on switch turn off/turn on routine and as soon as anything shows on the screen, I've got these black + white horizontal bars/stripes along the top 1/4 of my screen. The Apple Logo and the spinning progress bar have little fuzzy red spots on 'em. That's when it's time to freak out, as we're in "my computer done broke itself" territory. A few seconds of fuzzy progress bar and we get the wonderful "You need to restart your computer" message.
Fine.. restart.. same thing.
Reset the PRAM and SMC. Same thing.
Can't start up from external disks.. it just gives the same stripes + message.
I'm running a detailed hardware test (the hardware test loads but with the same stripes at the top and annoying blue/red vertical ones in the background to boot), and it's been running for about 80 minutes and is only 60% of the way through.
Anything else I can do, or do I have to drag the heavy thing to an Apple store and leave it there for a month? How in the world does a computer go from "working fine" to "completely broken" in 10 minutes?

More details:
The regular/non-extended Hardware Test returned no problems, despite taking hours for what was supposed to be a 3-5 minute test. I haven't dared run the extended.
I also tried removing third-party RAM and using the original configuration, then just the third-party and no Apple, etc.. It's not the RAM, as the problem is exactly the same.
I'm going to call up Apple support when I can, but just looking for other things I can check or possibly do until then, or just insight on what the problem could be.
Is it most likely the graphics card? Could it be an issue with the core hardware?

AP3 hanging, crashing and now refusing to start due to insufficient GPU???

After having spent two whole days rebuilding a face recog database and briefly got it working, AP3 now suddenly refuses to launch at all due to lack of GPU hardware:
http://www.ansatt.hig.no/kjellr/misc/20100223ap3_gpumessage.png
This is yet another situation that effectively has rendered my newly purchased Aperture 3 useless so far.
Any fix for this last error message that suddenly appeared, and a fix for all the other problems in sight?
Best regards,
Kjell Are Refsvik
Lillehammer, Norway

You might consider starting the entire library conversion and face detection over again but in 32bit mode until you get stable behaviour from Aperture. Then you can switch to 64bit mode as long as you are not using 32bit plugins like Photoshop and onOne as I do. That's forced me to stay in 32bit mode until Photoshop CS5 is released for the Mac. Everything working well in that regard now. When you run into a wall, might be faster to go around the wall (redo everything) than figure out a way through the wall.
I've posted other hints that Faces does not work at the Library level; appears to work at the project and album level. Naming faces is not as reliable as just using the CONFIRM FACES view within one of your faces and then clicking on a suggested face to CONFIRM or NOT as appropriate.

After adding still images, FCE crashed and now I cannot open the file

Anyone know how I can "rescue" my movie? Perhaps some of the images are corrupted but I'm in a Catch 22 since I cannot delete them without opening the file first. My other movies do open, so it appears that overall FCE is working. Hate to lose all this work...

See if you have an +Auto Save Vault+ file thqty pre-dates the crash.
Al

Flash crashed and now I cannot open my fla file.

I was working on a final project for school and Flash tried to auto save. It said it couldn't auto save and asked me to save a different way. When I clicked file to save as to the desktop it just crashed. I had made one change at this point and didn't care if I lost progress, but when I went to open the file it said it couldn't be opened.
I need to recover this file because I only have a much earlier version saved on my computer at home and this project is due in a week. Please help me!! I am using CS6 btw on a mac if it makes a difference.

This is a very well known issue. I suggest you look in these existing threads and follow some of their suggestions. Ultimately, unless the repair archive method works, it's probably not able to be recovered. Saving iterations of Flash files is workflow you should get used to (File.fla, File_v2.fla, File_v3.fla, etc).
Try saving your file (once you get some working version) to an XFL file. This is an easier format to manage if you have a repository (SVN, git, etc).

HT5815 Updated to 10.8.5 and now I cannot control my macbook pro with the track pad. Any solutions?

Like any other time, the App Store said there was a new update and asked if I wanted to update now. I did. Unfortunately, the update, after rebooting, has rendered the system unusable. I can no longer control the system with the track pad. The arrow is moving itself around the screen and the Launchpad periodically opens itself and gets locked in that mode. I've rebooted, launched in safe mode, and zapped PRAM. Nothing has changed. I experienced the same thing in safe mode, no change. Anyone else having these problems? Not sure what to do next.

There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article, and also this one, if applicable.
2. Open the Bluetooth preference pane in System Preferences and check for unknown or forgotten input devices. Disconnect any USB input devices that you aren't using.
3. Boot in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you reboot as usual, stop here and post your results. If you can't boot in safe mode, do the same. If you booted in safe mode and there was no change, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Some people have reported that they fixed a malfunctioning trackpad by pressing down on all four corners at once. I can't confirm, but it does no harm to try.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

ITunes crashed and now i cannot start my Macbook up

Similar Messages

Maybe you are looking for