ITunes crashed, now my ipod says it's empty

I was adding some music to iTunes today, when it crashed. I closed it and relaunched it. Upon relaunching iTunes said it could not detect my iPod settings and I need to restore it. I cancelled that and ejected it. Upon looking at it, the memory is still all taken up, about 21gb free on a 160gb classic. But is says there is no music and no movies. What can I do, I no longer have everyting on it and some stuff is from friends I can no longer get. Surley there has to be some way to get my music back. Thanks for any help. It is most appreciated.

You maybe able to fix the corrupted iPod, by using  Disk Utility->FirstAid->Repair, if you are using a Mac.
or use 3rd Party tools like iPod Access, see this good user tip by tt2
tt2 - thanks for posting all your great tips. (how about one on Disk diagnostics or Others segment)

Similar Messages

  • Installed iTunes 12 now my IPod classic will not sync

    ITunes and my computer freeze as soon as the IPod is connected. Any suggestions on how to correct this? I am running Vista 64bit

    tt2,
    Just wanted to let you know what happened.  Well the DFU seemed to work and the iPod reset.  It showed up in my iTunes and showed about 140 GB free. I was able to select all my songs to sync and it actually started to sync, showed it copied a few, then it froze again.  One song at a time came up saying it could couldn't copy the song due to an unnown error with a -69 in the lower corner.  After about 10 of these messages, one after another, over about 1 hour period o f time the iTunes just locked up completly.  I had to use windows task master to close iTunes to unfreeze my system.  An then had to shut down the computer to eject the iPod.  Now my iPod says a 140 GB are used for other (no songs) and no music.  The diagnostics screen now reads:
    Retracts: 21
    Reallocs: 120
    Pending Sectors: 280
    PowerOn Hours: 244
    Start/Stops: 41383 (must have missed the power on hours the first time not the start stops) it may be right since it is 23 higher than last time
    Temp: Current 25c
    Temp: Min 21c
    Temp: Max 254c
    We will see what the Genius says at the apple store says but I am not holding out much hope here.  I may try going back to an older version of iTunes and doing the DFU re-set again as that seemed to work until it tried to sync in iTunes 12.
    Thanks,
    zpc

  • I tried to update itunes and now my ipod won't work. What's wrong?

    I tried to update itunes and now my ipod is not recognized in itunes or on my computer. It will only show a picture of the usb cord going into itunes and it won't do anything else. How do I make it work and what happened?

    http://support.apple.com/kb/TS1538
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes.  There is no 'Devices" category on the bar at the left

    I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes.  There is no 'Devices" category on the bar at the left

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to be locked up on the 2nd song and will not continue to sync.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

    I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit. 

    When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
    After updating te ipod see if there is a change in results.
    PS: make sure the device is active while syncing so keep tapping the screen.
    Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

  • I tried to download the newest version for iTunes and now it is saying something about Apple Mobile Device. And now my iTunes will not complete the new download because of this. What does this mean???

    I tried to download the newest version for iTunes and now it is saying something about apple mobile device. Never heard of this before and now it will not finish downloading because of this. What is it?? What do i need to do to get itunes to download onto my computer again??

    I got most of it done but now it is not letting me delete my C:\Program Files\Common Files\Apple
    It says that file is open in another program....What do i need to do to delete that?
    Do you currently have the iCloud control panel installed? If so, uninstall that. Can you do the deletion now?

  • ITunes crashed now Mac mini wont power back on

    iTunes crashed now Mac mini wont power back on

    You have not provided any information on which to base troubleshooting. Minimal information would include the Model Mac mini you have for example Mid 2010 Mac mini, exactly what happened when iTunes crashed, and what -- if anything -- happens when you try to restart. It is unlikely iTunes has anything to do with the failure to reboot but instead iTunes crashed because of what even caused your Man mini to fail.
    Just as a starting point, be sure and check all your connections, power, monitor, keyboard, mouse, everything. You would not be the first to have a plug come adrift unexpectedly.

  • I have just downloaded update for itunes and now my ipod is not recognised, my ipod is displaying a picture of a usb cable and itunes logo , please help

    I have just downloaded the latest update for itunes and now my ipod is not recognised and my ipod is showing a usb cable and itunes logo please help me.

    Try the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • For some reason when I plug my ipod into my comp itunes freezes but my ipod says it is plugged and when I plug it into a different comp it works. How can I fix this?

    For some reason when I plug my ipod into my comp itunes freezes but my ipod says it is plugged and when I plug it into a different comp it works. How can I fix this?

    Setesh, See if both computer has the same version of iTunes, if both are the same, then it is your PC, that has plug-ins which is in conflict it iTunes. ( normally it is the Antivirus or some plug-ins to beautify your screen)
    If it is different, most likely the other PC has an older version of iTunes, so you should downgrade your iTunes to that older version, which your iPod interface well with.
    Other probable causes,
    you are using the USB 1.1 port at the front of your PC, and not the USB2,0 port at the back of your PC. so switch to the back.
    Dont use any other USB devices, when you are syncing the iPod.
    Dont use any USH Hub.
    Have a nice day!

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • My band recently got our album on itunes, but now it is saying that the album is unavailable. but the artwork still pops up and everything. what's going on?

    my band recently got our album on itunes, but now it is saying that the album is unavailable. but the artwork still pops up and everything. people have bought the album and you can even listen to previews of it... but it wont let you click on the album art or title. what's going on?

    You would have to talk to itunes or your label about this.
    We are itunes store users, not Apple.

  • I downloaded the new version of itunes and now my ipod cant sync

    I recently downloaded the most recent version of itunes, and now all my playlists are gone and when I try to sync my ipod it says that all of my music will be deleted because my ipod is syncd with a different library. I am afraid that this means that all my playlists will be deleted, and I don't want to have to go through all my music and make new playlists. I just want to keep what I have. How can I do this? Can I get rid of this version and go back to the one I had? Is there a way around this problem?

    Hello, srg60. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • My computer with my itunes crashed and my ipod no longer works. I purchased a new ipod and would like to download my music but I am unable to

    My computer with my itunes crashed. I can no longer use that computer. My ipod no longer works so I bought a new one. I would like to download my itunes that I have but I don't know how to get the information onto my new ipod.

    Your itunes purchases for music, etc are tied to your itunes account - any computer (up to 5) can be authorized with your iTunes account information. Enter your iTunes account name and password in the iPod - you don't say which version of iOS is on your iPod so more details can't be given until knowing that.

  • Itunes crashed, now programs that run on startup crash

    hi,
    I just installed itunes for my new ipod mini, and while going through my library (my music) i received an error message that advised that there may be a problem with my hardware.
    I managed to close itunes, and noticed that there were only 13 songs on my ipod mini, not 800. When I went to download more songs, I recieved the generic "itunes has encountered a problem and needs to close" message.
    I rebooted my computer, and noticed that I got the same message for three other programs that load upon my computer startup. My windows messenger is also no longer working on my computer, but my internet is still ok.
    I have Norton '05 and windows firewall, and have disabled both, to no avail. I have also uninstalled my ipod, and itunes/quicktime and still get the message. booting to last known good configuration doesn't help either.
    This morning, my computer was fine, now everything is crashing upon startup, and I have no more messenger! Can somebody please help me!!!
    w.

    hi b,
    Thanks for the reply. I think I figured out what happened. Somehow, when I installed the itunes/quicktime software or ipod hardware my computer managed to talk itself into thinking that the year was 9999!
    I'm not sure if anybody else has come across this, or what changed the date, but my itunes seems to work now, as well as my MSN Messenger. I'm using the computer right now, and can't reboot, but I'm sure that when I do, it will be fine again.
    I guess I have to laugh, after spending all night searching the registry and disabling software/hardware to test for conflicts that it was the date on my computer!
    Thanks for the input, and your time b. noir!
    w. rouge (with embarrassment)

  • There was a virus on my computer. After that i redownloaded itunes and now my ipod is not syncing with itunes. What should i do?

    Please Help.
    Its serious. I cannot put songs in my ipod touch anymore.

    I suspect that now the iPod sees the computer/iTunes library as a new computer/library. Follow these instructions
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Maybe you are looking for

  • New iPhone 4S will not connect to itunes!

    Hello I hope someone can help. I just got my new iphone 4s. Had a 3GS before which worked perfectly with itunes syncing etc. I turned on the new phone today and went through initial set up prompts until it asked me to connect to itunes. I plugged it

  • How to control security issues in a cluster?

    hi all: In our project we will take control of the security in front controller and we will cache the user profile . so even my app run in a cluster i want there 's just one palce to control security . but how? regards daniel

  • Dual boot, UEFI and partitioning

    Got a new computer which I put my old disks in. After a while I got them to boot properly but I'm going to take the time to go from my current MBR setup to GPT. The idea I have three disks, 480GB SSD, 640GB HDD and 2TB HDD. The idea is to use the SSD

  • Cluster multi-block requests were consuming significant database time

    Hi, DB : 10.2.0.4 RAC ASM OS : AIX 5.2 64-bit We are facing too much performance issues and CPU idle time becoming 20%.Based on the AWR report , the top 5 events are showing that problem is in cluster side.I placed 1st node AWR report here for your s

  • NOT ABLE TO GET SMARTFORM OUTPUT

    Hello! i am not getting output where error logs has already made , but where thier is no logs printing is coming. please tell me how to dlete error logs? or any other way to see output. please do help me. points surely awarded.