Itunes crashes the computer as soon as it opens and restarts the computer

Can anyone help with this issue as soon as I open itunes the computer crashes and restarts this happens also when I try to connect my iphone the operating system is Windows XP and all updates have been done for the OS.

Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Similar Messages

  • The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    Try below steps once
    click Gear icon on the top Right corner and Quit Creative Cloud App
    Click on Finder and then hold Command + Shift + G keys on your keypad
    It will open Go to folder window, type  exactly ~/Library and click on Go
    Make sure to open ~/Library not /Library (  there will be two Library folders )
    Then open Application Support > Adobe folders
    Trash AAMUpdater and OOBE folders.
    Then launch Creative Could and check.

  • ITunes crashes every time I sync music at 128kbps and jacks the HDD up...

    I'm at my wits end trying to figure this out.
    It will sync ok when I use the default bitrate, but my music is on average 320kbps or higher and it eats up all the room on my iPhone. I paid for a 32GB model so I wouldn't have this problem.
    I took the phone to the Apple store and they couldn't figure it out. They gave me a new phone in case that was the problem, but it does the same on the new phone. They were basically stumped and said it was an iTunes problem. I know it's not my computer because I literally got it a couple months ago.
    The phone syncs fine up until it gets to the music, then after attempting a couple of songs it says there was "an internal device error" and leaves my applications unusable. They appear in the GUI but disappear after a quarter second after i click on them.
    I tried an older version of iTunes, I tried it on a different Windows user account, I tried mp3's I tried AAC, I don't know what else to do!!!

    Just wondering if anyone else has figured this problem out yet? I am now having the same problem with my iTunes for my iPod classic and my iPod Touch. I even restored my iPod Touch and I am very frustrated and angry now.

  • Opened up Firefox this morning and can't open a single website....have to use Internet Explorer (oh the shame). I tried reinstalling firefox and restarting my computer. Don't know what else to do or why I can't get any internet on Firefox.

    Unable to connect
    Firefox can't establish a connection to the server at www.facebook.com.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.

    It is always a good idea to back up your bookmarks, if you are able to do that now it may help, and if you are considering using them in an alternative browser it may be a good idea to back them up as HTML as well as the default .json files.
    * see [[Backing up and restoring bookmarks]]
    Have you read the articles shown in my first message above with the blue clickable links. One of the first things to try is using Firefox in firefox [[safe mode]] which should be available from your program list, BUT when trying that on the first dialogue do not make changes just click on continue.
    *Does that work ?
    * did you see the list of options and click on the continue button ?
    * are you seeing any error messages ?

  • My computer won't start without unplugging and restarting, My computer won't start without unplugging and restarting

    My computer as failed to start twice without unplugging and restarting.  What is the issue here and do I need to address it.  My mac is approximately five years old and I recently added Snow Leopard.  Love computer and don't want to change

    I recently had a PC which had similar issues. When it was cold, it took couple attemps for it boot and after that it worked without any problems. Problem was capacitors, when they fail or are near total failure they might still work when they warm little bit (same thing sometimes applies to solder connections under chipsas they expand in heat and might form connection again) and this was the case with that PC. After replacing them all was back to normal.
    I would check capacitors.

  • I have downloaded Disney HD tv to my sons ipod touch, but when he goes to watch it on his ipod we get the following error "Please check your connection and restart the application" or cannot connect to server". How can I fix this?

    I have downloaded Disney HD tv shows to my son ipod touch, but when he goes to to watch it we get the following error message " or "cannot connect to the server" How can we fix this?  Thank you

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • Uploaded my site, Safari it works 100% in Fire fox the text becomes default and the interactive sections are laid wide open and frozen, the slideshow not there with overprint of four headings?

    I ve created a website using adobe muse for a client, and due to his hosting company had to covert and upload site to html and use a third party ftp loader FILEZILLA. The site is www.sin-connections.com. This works fine in Safari, but not Firefox. all the interactive accordions are frozen and open, the slideshow banner at the top has disappeared and only the four headings are overlaid  each other. the font has gone back to default Helvetica. It looks like any interactiveness has not been accepted, Ive been told that chromium works but not explorer as well. Ive come to the end of my ability of working this out. Can any one help me please. I ve used Adobe muse before ,for my site and had no trouble with it (www.andrew-bailey.co.uk) .

    Hi Zak, thank you for your reply, firefox has javascript, and the funny thing is that whilst creating the site in Muse, that I was testing it in Safari, Firefox, Chromium, and IE and it was working fine, hence why I continued the site. It was when I moved over to a third party Web hosting company, EUKHOSTS, and that my client decided to use the linux route that possibly it went all pear shape. The ftp loader on the muse failed to work despite technicians saying there would be no problems, I then had to create http pages and file them in the same folder and use FileZilla to download the site. on Safari the http index page works 100% alongside all the other pages whereas the FIREFOX page has the problem explained to you.
    My own site was done using MUSE and I had no problem with it, it works using all kinds of browsers. Not being technically minded I thought Adobe muse would bypass a lot of the technical fiddly work - that you guys seem to be great at !
    www.sino-connections.com

  • Can we open and close the cursor again and again

    hi all,
    with the help of cursor select statement i am writing some columns into the text file. while writing into the file in between i want to write something which belongs to others cursor. shall i close the first cursor and reopen it again..
    is its works?

    If you are using for loop the you don't need to open and close the cursor like:
    SQL> set autot off
    SQL> begin
      2     for i in (select ename, deptno, sal from emp)
      3     loop
      4             for j in (select dname from dept where deptno = i.deptno)
      5             loop
      6             dbms_output.put_line ('Ename:' || i.Ename ||'  Dept Name:'|| j.dname);
      7             end loop;
      8     end loop;
      9  end;
    10  /
    PL/SQL procedure successfully completed.
    SQL> set serveroutput on
    SQL> /
    Ename:SCOTT  Dept Name:RESEARCH
    Ename:first_0  Dept Name:SALES
    Ename:first_1  Dept Name:SALES
    Ename:first_0  Dept Name:RESEARCH
    Ename:first_1  Dept Name:SALES
    Ename:first_0  Dept Name:SALES
    Ename:first_1  Dept Name:ACCOUNTING
    Ename:first_0  Dept Name:RESEARCH
    Ename:first_1  Dept Name:ACCOUNTING
    Ename:first_0  Dept Name:SALES
    Ename:first_1  Dept Name:RESEARCH
    Ename:first_0  Dept Name:SALES
    Ename:first_1  Dept Name:RESEARCH
    Ename:first_0  Dept Name:ACCOUNTING
    PL/SQL procedure successfully completed.
    SQL> Or let us know about your requirements i.e. why you need to open/close the cursor again and again.

  • I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?

    I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?

    LOL.. don't switch off the TC.. this is fairly typical behaviour..
    Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
    Are you running latest firmware for your TC?
    What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
    Get one bigger USB hard disk instead of 3 smaller ones.

  • I've bought a movie but iTunes crashes while trying to download it. Do you experience the same today?

    I've bought a movie but iTunes crashes while trying to download it. Do you experience the same today?

    Can you not sync your iPod with iTunes? That should get the movie onto your computer. Now sync your iPad and transfer the movie?

  • When i try to sync my iphone 5c to my itunes it says my computer is not authorized.  I've gone through the authorize steps and restarted my computer.  It says "already authorized," yet the phone still won't sync saying, "computer unauthorized."

    When i try to sync my iphone 5c to my itunes it says my computer is not authorized.  I've gone through the authorize steps and restarted my computer.  It says "already authorized," yet the phone still won't sync saying, "computer unauthorized."

    Click here and follow the instructions.
    (91121)

  • Yesterday i sync music to my ipod touch from iTunesn but nothing showed up in the 'recently added' folder. now today neither my computer or iTunes is recognizing the ipod. I uninstalled iTunes and reinstalled it and restart the computer

    Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Does the iPod charge?
    Have you tried another cable?
    Another computer to help determine if you have an iPod or computer problem?

  • I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this?

    I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • My Final Cut Pro keeps crashing and restarting the computer what could be the problem?

    My computer keeps crashing and then restarting whenever I try to use my Final Cut Pro X.  I have an iMac with OSX 10.9.2 and 12GB of memory
    there is an ATI Radeon Hd 5750 1024 MB Graphics Card, I just don't understand why things are not working at all.
    What can I do to ensure everything is compatible and there is nothing I am missing.

    Whatever the cause, please return to this forum and tell us what you did or had done to get your system working again.
    There is no direct connection between FCPX and restarting the Macintosh that I am aware of. You haven't said if you can actually launch FCPX and then something initiates a restart. And you haven't said what error you see, if any. Nor have you actually said if FCPX has ever worked on that machine. Vital information.
    If you search this FCPX forum, you will see that other users who have had restarting issues have not reported back to tell us about their solutions. ON other Apple forums, perhaps those related to your specific hardware and version of Mavericks, you will find several obscure and seemingly unrelated restart issues.
    I have not had andy Macintosh restart issues for many, many years. My experience with Macs is that restarts are almost always hardware-based, usually incompatibility with some weird third party rig like a USB repeater, firewire adapter, cereal box keyboard, cheap monitor, ancient card reader, or even an oddball sound system. Start by disconnecting everything.
    Hope you get it figured out.

  • HT1926 Trying to update the latest version of iTunes. Get message that the network I am trying to access is unavailable. That there is no installation package on the computer. I tried to uninstall and received the same message?? I am currently running Win

    When attempting to download the latest version of iTunes I receive a message that there is no installation package found (iTunes.msi).  Searching my computer, I cannot locate a file with the msi designation. Tried to use the .exe file unsuccessfully.  I am unable to remove the current version for the same reason. I have a large library of music that I cannot download on my iPhone4 for the same reason.
    Any suggestions would be greatly appreciated!!

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • Accounting Document not Cleared using BAPI_ACC_DOCUMENT_POST

    Dear Experts, I am Using BAPI_ACC_DOCUMENT_POST to post the GL'S , Accounting document is getting created successfully . My Doubt is whether this bapi will clear the Accounting document automatically or we have to use any other function module to cle

  • Labview 12.0 Crashes while trying to open a VI

    Hi, I've got a problem while opening a file. I did not have any problem opening it like five minutes ago. I tried to reboot the computer and shut down labview couple of times. The labview 12.0 crashed and left me a message attached. And the problem V

  • Foreign Currency setup in B1

    First time to setup B1. Customer needs Local Currency is HKD, PO use China Yuan and System Currency is USD. 1. In Company Detail, Local-HK, System-USA, Default Account Currency should use All or Local? 2. GL COA each account need set Currency to HKD

  • ICal event invitation failures due to missing/malformed email addresses

    These problems, although slightly different, appear in both 10.5.8 and 10.6.1. I don't see in the release notes that this was addressed in 10.6.2, but I have not installed it yet. In 10.5.8, sometimes when a user is invited through the iCal invitatio

  • Abap tables for adapter engine errors

    Hello, Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables? Any help is very much appreciated. Thanks MLS