ITunes Crashes When Exporting Playlists

As the topic implies, whenever I try to export a large playlist, iTunes freezes/crashes.
I have had this problem a few times before and updating iTunes has always solved it, however that is not working this time. I have no idea what to do now, so if anyone has any suggestions to offer, I'd be very grateful.
Thanks.

Tell Apple about it.
iTunes > Help > Provide iTunes feedback.
ALso send more details, such as how large the playlists is (how many songs, how many GB in music....this info should show up at the bottom of iTUnes when you're in the playlist).
And if you notice it always stopping at one song, try taking that out.
You could also check in your Application event viewer and see if there is an error from iTunes there.

Similar Messages

  • Itunes crashes when selecting playlists

    Hi there,
    I have two of the standard playlists in my iTunes (Recently Played and Recently Added). When selecting these i get a pop up stating that iTunes has stopped working and the program must close. I've tried to delete the playlists as i'm not that bothered about them but even when i right click on them to try to delete...i get the pop again.
    Additionally if i add the Date Added and Date Played columns into iTunes and try to sort by them columns, i get the pop up again.
    All other features of iTunes is fine.
    Anyone else have this problem, and/or have a solution to get it fixed?
    Thanks.

    Tell Apple about it.
    iTunes > Help > Provide iTunes feedback.
    ALso send more details, such as how large the playlists is (how many songs, how many GB in music....this info should show up at the bottom of iTUnes when you're in the playlist).
    And if you notice it always stopping at one song, try taking that out.
    You could also check in your Application event viewer and see if there is an error from iTunes there.

  • ITunes crashes when I connect my iPod to the PC when iTunes is running....

    I have written about this problem before, but there have not been any successful solutions as of this date. I will explain my situation a little further and maybe someone can help.
    Most of the time, when I connect my iPod to my pc while iTunes is running, the instance the iPod shows up on the library site, and whenever I move the cursor, iTunes crashes, so I have to close iTunes right away and try to disconnect my iPod. Most of the time, a message comes up that says info is being transferred to the ipod and that I shouldn't disconnet it at that time, but I usually go ahead because I know it isn't transferring at that time, since itunes has crashed.
    Sometimes, after I have clicked on the first message to go ahead and disconnect my ipod, another messages comes up that says something to the effect of, "You can't disconnect because it is being used by another server at this time." So I click "OK" and then iTunes stays on for a few moments which gives me time to transfer a song or two, but then itunes crashes as soon as it finished transferring or before it finishes.
    As anyone can imagine, this has really become a hugh problem. Having an iPod and not being able to use iTunes makes it very unhandy. I'm not able to add any new music or any of the playlists which i have been working on. Does anyone have a solution, or any suggestions as to what may be going on? It would be deeply appreciated.
    I plan to restore my iPod in a day or two if I don't get a solution to this, but I don't have all of the music, videos, etc. that I have on the iPod since I removed much of it from iTunes to help the computer run faster. I had over 2000 items in the library, so it was pulling the pc down and it was taking forever to use the computer.
    I am unable to use any of the software to transfer everything from my iPod to the iTunes library because of the problem with iTunes crashing when I connect the iPod, so this isn't a solution at this time.
    Someone, please help!
    HP   Windows XP   Using DSL for internet access

    I suspect a hardware problem.  But do the following to rule out a software problem:
    - Reset.  Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Resore the iPid to factoery defaults/new iPod.
    In the latter part of you post, I thin you ar sayng that you do not have a syning computer and the music is not on the computer. If so, do the following so you will not lose anthing (or very little) when you restore.
    - Transfer iTunes purchases to the computer:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Best iPod to PC
    - Connect the iPod to the computer and right click on the iPod under Devices in iTunes and select Backup. This will make a backup so you can restore to the backup

  • Itunes crashes when trying to open the devices preferences

    itunes crashes when trying to open the devices preferences. I use Mac osX 10.7.3 and iPhone 4s. The iPhone (and iPad) syncs via WLAN but when i try to open the iPhones/iPad Preferences in iTunes iTunes crashes. Any Idea?

    Hi there AlexHB123,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W. 

  • Itunes crashes when importing music (v10.5.2.11, Win 7 (64))

    iTunes crashes whenever I try to import either a file or folder - regardless of the file format (e.g. WMA, MP3 etc.). 
    This is only a recent problem.  Is the only option to try to re-install iTunes? 
    Thanks for any assistance. 
    Dyswim

    I have had the same problem & itunes crashes when i try to import a file. Now i can't even start itune. I've reinstalled itunes so many times, without a fix, I've lost count.
    I did post and had no reply. I'll watch this post with interest.

  • ITunes crashes when Importing music from CD

    Hi,
    Im having trouble importing CD's using itunes. The process begins and then midway through the first track i get an error message saying that itunes need to close. I have run the CD diagnostics, but dont really understand what they mean. If anyone can offer any ideas on how to fix this it would be very gratefully recieved.
    Thanks,
    My CD Diagnostics results:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    eveshamvale AWRDACPI
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: AFS2K (3.1.21.0), BSSTOR (1.0.7.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: RADEON 7500 Series\RADEON 7500 Series
    IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STCD-RW_GCE-8520B________________1.03___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomHL-DT-STDVD-ROM_GDR8161B_______________0100___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST DVD-ROM GDR8161B, Rev 0100
    Audio CD in drive.
    Found 17 songs on CD, playing time 75:51 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:33:45
    Track 3, start time 07:48:40
    Track 4, start time 12:09:20
    Track 5, start time 15:38:47
    Track 6, start time 19:13:32
    Track 7, start time 22:08:32
    Track 8, start time 26:44:32
    Track 9, start time 30:24:22
    Track 10, start time 35:19:72
    Track 11, start time 41:43:50
    Track 12, start time 46:32:25
    Track 13, start time 51:25:05
    Track 14, start time 57:55:02
    Track 15, start time 62:58:65
    Track 16, start time 67:45:55
    Track 17, start time 72:12:15
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST CD-RW GCE-8520B, Rev 1.03
    Audio CD in drive.
    Found 12 songs on CD, playing time 49:42 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:56:45
    Track 3, start time 08:19:37
    Track 4, start time 12:21:05
    Track 5, start time 16:54:65
    Track 6, start time 21:40:52
    Track 7, start time 26:57:60
    Track 8, start time 30:54:62
    Track 9, start time 34:33:25
    Track 10, start time 38:37:42
    Track 11, start time 42:09:10
    Track 12, start time 44:35:30
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 12 16 24 32 40 48 52.
    The drive CDRW speeds are: 4 8 10.

    I have had the same problem & itunes crashes when i try to import a file. Now i can't even start itune. I've reinstalled itunes so many times, without a fix, I've lost count.
    I did post and had no reply. I'll watch this post with interest.

  • Itunes Crashes when importing Music File or Folder on Windows 7 64-Bit with Itune 10.5 and update ios 5

    Itunes crashes when importing Music File or Folder ever since i updated it yesterday

    You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
    tt2

  • ITunes crashes when doing a power search. I get a Microsoft Visual C   Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025.  Pure virtual functional call.  If I select ok, Windows 7 pops up with iTunes has stopped working

    iTunes crashes when doing a power search. I get a Microsoft Visual C   Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025.  Pure virtual functional call.  If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down.  Anyone else every have this issue.  Any ideas on a fix?
    Thanks,

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • ITunes crashing when connecting to the store on Windows 8.1

    Hello,
    I had iTunes crashing when connecting to the iTunes Store with an Apple ID. I tried unsucessfully all the solutions posted on the many threads of people having the same issue. So I decided to reinstall Windows. A clean Windows 8.1 install from the Microsoft DVD. And guess what, it is still crashing! How can this even be possible?
    The problem:
    - iTunes crashes when connecting to the store with an Apple ID. It connects, briefly freezes, then crashes.
    - I can access the store without an Apple ID without crashes. But it crashes as soon as I connect with an Apple ID.
    The system:
    - A clean, fully updated, Windows 8.1 Pro w/ WMC install from the Microsoft DVD.
    - Applications I installed, along with iTunes: Adobe Reader, Google Chrome, Skype, Office 2013. Nothing else. No crapware. No nothing. These are fairly common applications that shouldn't conflict with iTunes.
    - Antivirus is the built-in Windows Defender.
    - Firewall is the built-in Windows Firewall.
    - Intel HD Graphics 3000 on an Acer V3-571-6486
    - I have not moved Apple's folder from Romaing and Local AppData of the old systems... So it's a clean iTunes profile.
    - I can sucessfully sign-in to the iTunes Store with this account on another computer
    - I have tried with multiple accounts on this computer, all crashing
    There are tons of threads about this. I tried all the solutions posted, including:
    - Adding "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to the PATH environment variable
    - Copying QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
    - Moving QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
    - Updating the graphics card to the latest available driver from Intel's website (9.17.10.3517, 2014-10-04)
    - Downgrade the graphics driver (9.17.10.3347, 2014-01-29)
    - Use the graphic's driver from Acer's website.
    - Use Microsoft's Basic VGA Driver
    - Disable the Graphic's Adapter entirely
    - Have tried to monitor the process with ProcMon, looking for a hint like a missing file or registry entry, but have not found anything helpful.
    These solutions seem to have worked for almost everyone, but not me. The crash details in the Windows Application log are useless. Faulty module name is 'unknown'.
    I am out of solutions. Is there anything left to do? Can anyone out Apple debug the dump file or something? Is there any way to contact Apple about this issue?
    Many thanks.

    Hey zoyashahab,
    Ok, so it sounds like there are two issues here we want to address, the first being the iTunes Store connection issue and the second being iTunes not recognizing your iOS devices.
    First, I'd start with troubleshooting the recognition by following the steps in here:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If after getting that running again, you still can't connect to the iTunes Store, then I'd go through the troubleshooting steps in here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

    I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

    Hi axostech!
    Here is an article that will help you troubleshoot this issue with your iTunes crashes so that you can adjust your iTunes Match settings as you desire:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Crystal Crashes when exporting to PDF

    Hi Experts,
       Crystal reports crashes when exporting a report to PDF. I am using Crystal Reports for SAP Business One, what could be causing this..is it a patch level problem ?

    Hi,
    Please check this thread http://scn.sap.com/thread/3303863.
    What is your B1 version and PL?
    Thanks & Regards,
    Nagarajan

  • Media Encoder crashes when exporting from Premiere Pro

    Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
    Any idea why Media Encoder will crash?

    Try turning off GPU acceleration.

  • ITunes crashes when I'm trying to log in into iTunes store

    After I've made my first purchase (of a music album) in iTunes store iTunes has crashed. And now iTunes crashes when I'm trying to log in into iTunes store. I've tried removing it, deleting iTunes folder in C:\Users\USER_NAME\Music and then installing iTunes. The problem's remained.
    Additional info:
    iTunes version: 11.3.1.2
    Windows 8.1 64-bit.

    I've solved the problem by updating Windows.

  • ITunes crashes when I play certain songs

    After having upgraded to the latest firmware (OS 4.3.1) iTunes crashes when I try to play and sync some of my songs in my album that previously played and synced fine. The songs are encoded as .m4a at 256kbit, 44.1 kHz and are playing fine in for example Windows Media Player...
    So why suddenly not in iTunes? And what can I do about this?

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

    My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
    Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012)  Mountain Lion,
    Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
    32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
    Fusion Drive da 3TB
    NVIDIA GeForce GTX 680MX 2GB GDDR5
    During the rendering of complex FCPX mac crashes and I have to force a restart.
    I also happens when I try to export movies with Motion 5.
    Does anyone have the same problem with my new iMac?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Maybe you are looking for

  • Change tempo, not track order or placement!

    Hi all! I've got a big problem, a buddy of mine and I just recorded tracks off of his HD-recorder into Logic Express! We need to make back tracks for live use. Unfortunately he does not remember the tempo of the songs. And we need to put a click on t

  • SMSY - Enterprise Portals

    Hi, I am trying to include all portal systems in SMSY, but problem with assigning Logical Components. in SMSY, I defined server, database and system (but In system wizard, RFC wizard not showing up for Portals..I think because of JAVA component) But

  • Dynamic WEP with Win2k3 Radius server

    Can someone provide information as how to configure AP350 and AP1200 to use dynamic WEP with Win2k3 Radius server. What security feature should be configured If possible provide information for configuration of Win2k3 Radius server.

  • Disks not avialable and cannot add new disks to existing pools

    I have a few disks that are RAW and I want to add them to existing pools.  However, only 1 disk shows up as a Primordial disk and the others do not.   I cannot add these drives to a new volume and when I try to add any drive to an existing pool, the

  • Adobe CC year membership not transferred to new computer - How do I get it back?

    Earlier this year, I company I worked for bought me a year's subscription to Adobe CC. When got a new computer I wanted to transfer the membership, so I signed out of the desktop app on my old computer and installed it (and signed in) on my new machi