ITunes crashes when I access iTunes Store/get Microsoft error message

I run iTunes on XP. I can open/play/synch iTunes just fine.
But over the last two days, as soon as I access the iTunes Store, I get a Windows error message (that iTunes has encountered an error and needs to close, etc.). The event viewer indicates that the faulting module is usually an Application Error ("Faulting application itunes.exe, version 9.1.1.12.faulting module webkit.dll.version 5.31.22.7, fault address 0x000f24de") followed a few seconds later by a problem with the Bonjour Service.
The odd thing is, I can log into iTunes Store to check the details of my account such as credit card billing address.
I reinstalled the latest iTunes but that's not fixing the problem.
Help!

Hi jfahlenkamp,
Thanks for visiting Apple Support Communities.
If iTunes quits unexpectedly when accessing the iTunes Store, try the troubleshooting steps in these articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jeremy

Similar Messages

How do I complete uninstalling itunes? when I try installing i get an error message saying it can't find the path ,itunes64.msi missing.

How do I complete uninstalling itunes? when I try installing i get an error message saying it can't find the path ,itunes64.msi missing

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
tt2

ITunes crashing when connecting to the store on Windows 8.1

Hello,
I had iTunes crashing when connecting to the iTunes Store with an Apple ID. I tried unsucessfully all the solutions posted on the many threads of people having the same issue. So I decided to reinstall Windows. A clean Windows 8.1 install from the Microsoft DVD. And guess what, it is still crashing! How can this even be possible?
The problem:
- iTunes crashes when connecting to the store with an Apple ID. It connects, briefly freezes, then crashes.
- I can access the store without an Apple ID without crashes. But it crashes as soon as I connect with an Apple ID.
The system:
- A clean, fully updated, Windows 8.1 Pro w/ WMC install from the Microsoft DVD.
- Applications I installed, along with iTunes: Adobe Reader, Google Chrome, Skype, Office 2013. Nothing else. No crapware. No nothing. These are fairly common applications that shouldn't conflict with iTunes.
- Antivirus is the built-in Windows Defender.
- Firewall is the built-in Windows Firewall.
- Intel HD Graphics 3000 on an Acer V3-571-6486
- I have not moved Apple's folder from Romaing and Local AppData of the old systems... So it's a clean iTunes profile.
- I can sucessfully sign-in to the iTunes Store with this account on another computer
- I have tried with multiple accounts on this computer, all crashing
There are tons of threads about this. I tried all the solutions posted, including:
- Adding "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to the PATH environment variable
- Copying QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
- Moving QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
- Updating the graphics card to the latest available driver from Intel's website (9.17.10.3517, 2014-10-04)
- Downgrade the graphics driver (9.17.10.3347, 2014-01-29)
- Use the graphic's driver from Acer's website.
- Use Microsoft's Basic VGA Driver
- Disable the Graphic's Adapter entirely
- Have tried to monitor the process with ProcMon, looking for a hint like a missing file or registry entry, but have not found anything helpful.
These solutions seem to have worked for almost everyone, but not me. The crash details in the Windows Application log are useless. Faulty module name is 'unknown'.
I am out of solutions. Is there anything left to do? Can anyone out Apple debug the dump file or something? Is there any way to contact Apple about this issue?
Many thanks.

Hey zoyashahab,
Ok, so it sounds like there are two issues here we want to address, the first being the iTunes Store connection issue and the second being iTunes not recognizing your iOS devices.
First, I'd start with troubleshooting the recognition by following the steps in here:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If after getting that running again, you still can't connect to the iTunes Store, then I'd go through the troubleshooting steps in here:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Welcome to Apple Support Communities!
Best,
Delgadoh

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Just installed itunes but when i try to open it this error message pops up: "apple application support required." I've tried uninstalling and reinstalling but nothing works

Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works

When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
When you installed iTunes did you get any error messages?
Anyway, on the face of it it may be worth trying a separate install of Apple application support.
Uninstall iTunes again. Now open Apple Software update, assuming it is working.
It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
Before going on, can you get to this stage OK?
One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures.

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

I have an iPod Touch version 4.2.1, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. What can I do to fix this problem?

I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?

Try:
iOS: If you can't back up or restore from a backup in iTunes

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP!

Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP

Did you downgrade iTunes? What version is listed in Help> About iTunes?
If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
If you have iTunes 10.5.2, try re-creating your iTunes library.

Can't run itunes is asking for quicktime but keep getting an error message .

can't run itunes is asking for quicktime but keep getting an error message the feature you are trying to use is on a networkresourse tha is unavailable c:\docume~1\test\locals~1\temp\Ixp133.

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

I am trying to update itunes software to 10.5 but I get an error message saying to try manually installing and I try that and it still doesn't work, Help!!

I am trying to update itunes software to 10.5 but I get an error message saying to try manually installing, HELP!!!

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do.

ITunes crashes when I access iTunes Store/get Microsoft error message

Similar Messages

Maybe you are looking for