ITunes creating shortened tracks when using 'create AIFF version'

Hello
Today I have noticed a problem when selecting a series of songs in iTunes and choosing "create AIFF version". The conversion will begin and then it will randomly hang on certain tracks. iTunes freezes for a minute or so, and then resumes conversion. I have just realised that the copy of the track on which the program hangs will be missing over a minute of audio from the real length of the song. This has happened several different times with different tracks.
I am using iTunes 10.6.1 on OS X Lion 10.7.3. Is anyone else having this problem? I am currently looking through all the tracks I've converted over the past month to try and work out how far back this problem started. I've recently had my iMac returned to me after being repaired by Apple for various problems including HDD issues and I am concerned that if this isn't a problem with the iTunes app then it's my hardware at fault.
Any feedback would be appreciated.
Thanks

hm, well it seems it may be another installment in the never-ending saga of bugs that ensues when you share a hard disk with your PC using AirPort...I can see AIFF files in that hard disk with my PC. Maybe after I restart my Mac the files will be available...

Similar Messages

HT4889 I have accidentally created another account when using Migration Assistant to a new MBA. How do I now 'migrate' all the files from both accounts into one to save myself having two accounts, both of which are me? Help?

I have accidentally created another account when using Migration Assistant to a new MBA. I have read that I probably should not have skipped migration in the initial set up and the problem would have been avoided but, alas, here I am. Does anyone know how I can 'migrate' all the files from one of the accounts that has been created to the other, so then I can delete it and have a single user on the computer seeing as I am the only person using it? I have read starting again, if this is the way to go, where is the best place to start 'starting again'?

Yes definitely should see it but its not coming up (I don't think) when I log out of 2nd user and into the main account. Opening finder in the 2nd account, I can obviously find the public folder because thats where I dropped all the files, but when in the main account, it can't be found. The only public folder that comes up is the folder for that account (main account) and it does not display files I'm looking for. Frustrating....
EDIT: Have found it through a round-about way but all music and photo and movie etc files have a red stop sign disallowing them from being transferred. Can you guess what the next question will be?

Impact of Function Modules when used in upgraded versions

Hello Experts,
I wan to know the Impact of Function Modules when used in upgraded versions. How the function module works irrespective of changes done to it in the latest verisons
Thanks in Advance

Hi,
If the function modules is released, it should not have any impact. However if not released, use them with caution as SAP does not support non-released function modules.
Cheers.
...Reward if useful.

Content of textfields is gone, when using LiveCycle Designer Version 8.2

Hi there,
I´m having a Problem with LiveCycle Designer in Version 8.2 (exactly 8.2.1.4029.1.523496). When It try to open a PDF-document containing an AcroForms-Form with some textfields, I can see all the textfields of the document, but their content (the text) is missing, I only see the empty fields.
When I use LiveCycle Designer Version 8.1 (exactly 8.1.1.3021.1.438934) everthing works fine. The xml-sources produced by the two differnt LiveCycle-versions look different, too.
Is there any known bug or something, which could explain this behaviuor?
Thanx a lot
Chris

Hi Paul,
in the attachment you´ll find the pdf-Document and two xdp-files which I
generated with LiveCycle 8.1 and 8.2. They look pretty different, e.g. in
8.2 all of the
Kopie
Thema
Content of textfields is gone, when using
LiveCycle Designer Version 8.2
Not that I am aware of ....I assume you mean that when you open the form
in Acrobat the data is gone ...can you send the form and data to
mailto:[email protected] and I will have a look when I get a chance.
Paul

Data Corrupted when using CREATE AS SELECT * FROM over DB LINK

Hi ,
I wonder if anyone has suffered a simillar issue as this:
I have a DB Link Between a 10gR1 (Base install not patched) database on Windows 2003, and a 10gR2 (with latest Patch Database ) on Sun Solaris. The 10.1 DB is the SOURCE 10.2 is TARGET
When using a statement like the following on the Target :
CREATE TABLE a AS SELECT * FROM TABLE a@SOURCE
The statement completes, however for some (not all) tables, the data content is seriously corrupted, I noticed this when trying to apply a UKey on the newly created table in TARGET. The data was completely messed up for around 600 out of 450000 rows, I could not easily tell which rows were messed up as it was the columns that build the UKey that were affected :-(
The same happens if I precreate the table and use INSERT /*+APPEND*/ INTO AS SELECT.... etc
I realise that using an unpatched 10.1 is not nessasarily advisable, however currently it is difficult for us to patch or upgrade the DB...
If anyone has seen this before an/or has any ideas what might be the cause , I would appreciate any help I can get.
Cheers
JAmes

The Problem Manifest itsself in that some fileds are created with incorrect Values, specificaly in easy to identify cases NULL where the original values where not NULL.
These field do not contain special chars like ä or ß , so it does not seem to indicate a charset issue.
JAmes

When using "create outlines" on type, gradient goes wacky & outlines look strange (InDesign CS6)

Hi,
I'm working on a logo in InDesign CS6 where I'm trying to "create outlines" from type I've set so I can have some final artwork to hand over to a sign company. The type has a gradient applied, along with a white stroke added to the outside. When I "create outlines" of the font, the gradient mysteriously changes angle and the white outline around the type no longer connects correctly. Hard to describe, so have a look at the image below:
The goal is to have the blend and logo look like #1. So, my questions:
a) how do I "create outlines" of the type and also keep the gradient the same angle as #1? I can manually adjust this using the gradient tool, but this is inaccurate and kludgy.
b) how can I get the white outlines on the new, converted logo to look like 1 (nicely connected), rather than the mess in #2?
Many thanks in advance for your help and insight!
Kris

@Kris – For getting the outlines right after "Create Outlines" you need some additional steps to merge the overlapping "ogo" part of your logo to one path.
Maybe what you cannot do is getting the outlines totally right. That will depend of the number of inner forms. For that I recommend Adobe Illustrator.
What you can do in InDesign:
1. Release the compound path of all outlined characters
2. For some paths you have to change the direction of the path and do compound again
3. Then you can use path finder to add paths together
And: You'll need a new gradient with a different start/stop point.
Here some steps illustrating the problem:
(left the outlined text, right the "live" text)
1. Gradient applied to the "live" text is different from the converted outlines
(Outline at left is already postprocessed with the path finder)
Path situation immediately after the conversion.
Gradient newly applied with -90° (will not match the original)
Original gradient applied to outline (will not match original):
New gradient applied to match original:
Also look at the position of the outline; now "inner" instead of "middle".
As I already said, for things like that I'd rather use Adobe Illustrator…
Uwe

How to get itunes gift card code when just creating account?

where do i get a gift card code from? when just creating a apple id, and i cant redeem

The code is on the back of the iTunes gift card
Do you have an iTunes gift card?

Project Owner not mapping when using Create Project in Ideation Custom list

I have a custom ideation list in Project Online used for project proposals. When using the Create Project function in the ribbon, I select the mapping from my Project Owner people picker field to map to Project Owner ID. The Project is then created successfully,
however the Project Owner is listed as the person who clicked the Create Project button in the ribbon, not the name in the Project Owner field. This also occurs when running from SPD workflow. I know in on-premise situation this works as I expect ... is this
a bug in Project Online?
Thanks,
Josh

Josh,
Just wanted to say that, I was able to reproduce your issue. It works as expected on-prem, but not as online. I will update once I have more info on any posisble resolution.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

CR closes when using "create new connection"

Hi,
Crystal Reports 2008.
After opening a CR 10 report once, I can't create new blank reports. If I use "create new connection" to add a data source the program shuts down. No crash dump or anything.
Helpdesk could reproduce error but couldn't solve the problem.
To re-install my system after format costs a lot of time (and therefore money). So I want to try to solve my problem first by my self.
Question: does freeware software exist to trace the behavior of an EXE file?
I'd like to figure out where it goes wrong.
Manually removing CR and reinstalling didn't help either. Nothing helps. FP 1.7 installed. Still the same problem..

Please re-post if this is still an issue or purchase a case and have a dedicated support
engineer work with your directly.
Try updating the .NET Framework

Trouble converting files created with 9.2 using 5.0 version.

I have multiple pcs using 5.0.1 version of acrobat without any problem. Recently bought new pc with 9.2 installed. Problem is when I create with new version, older versions can't open. Error message says file corrupted. I tried downloading all upgrades for older version. Is there a solution without upgrading all other pc's with newer version?

I'm using Acrobat distiller from my 9.2 version normally converting a word document into PDF. I haven't really changed any settings from original installation, but I'm afraid I must have some settings that are preventing those with the 5.0 version from opening.

ITunes has stopped Working when using Ipod shuffle 3gen on Windows Vista HB

Itunes keeps shutting down when I insert my Ipod shuffle into the usb connection of my latop. I am using a Windows Vista Home Basic for an OS.
Not sure if this is a Vista, Apple issue, or something else...
I have contacted apple about this and uninstaled/reinstalled Itunes. Yet after all this, I get the same error message. The message reads:
"iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
As far as I know Vista should be compatible with iTunes and it is until I actually try to use my shuffle (newest model). Its weird because my shuffle works fine on a second computer that has Windows XP for an OS...
Does anyone have a solution to this??
Thanks in advance!

i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

WLAI doesn't create appropriate triggers when I create an event

When I create an event for an application view in WLAI, the appropriate database
triggers for that table are not being created properly. I am trying to create
an event that listens on the CUSTOMER_TABLE table for an insert. When I run the
test, put an ample amount of time, and perform an insert/commit manually, the
system doesn't recognize the insert.
The problem is that there is no trigger created on the CUSTOMER_TABLE that would
write data to the EVENT table. I have investigated the DbmsEventRouter settings,
web.xml, and other connection settings and can't find anything wrong with them.
My user on the database has the ability to create triggers as well. The server
console also does not report any errors (other than the timeout).
Is there something I am missing that would cause an event creation to NOT write
the appropriate trigger with it? Thanks in advance.
Dan

Dan,
Please verify the following:
1) that an insert trigger exists on the table in question. If there is no trigger,
then the EVENT table will not get populated.
2) that the data source you've specified when connecting to the EIS is the same as
what the event generator/router has in the web.xml
3) that there are no other instances of the event generator/router listening on the
same EVENT table. If so, it could be that the other instance of the event
generator/router gets the events and deletes them from the EVENT table. This would
give the other event generator/router the impression that no events have happened.
Cheers,
Chris
Dan Kim wrote:
When I create an event for an application view in WLAI, the appropriate database
triggers for that table are not being created properly. I am trying to create
an event that listens on the CUSTOMER_TABLE table for an insert. When I run the
test, put an ample amount of time, and perform an insert/commit manually, the
system doesn't recognize the insert.
The problem is that there is no trigger created on the CUSTOMER_TABLE that would
write data to the EVENT table. I have investigated the DbmsEventRouter settings,
web.xml, and other connection settings and can't find anything wrong with them.
My user on the database has the ability to create triggers as well. The server
console also does not report any errors (other than the timeout).
Is there something I am missing that would cause an event creation to NOT write
the appropriate trigger with it? Thanks in advance.
Dan

When using Windows 8 version 64 bit, and installing Adobe Reader I receive error 1500.

Error 1500 using Windows 8 version 64 bit when installing Reader

Is there anything else beside the number 1500?
Try using the offline installer from http://get.adobe.com/reader/enterprise/

Not able to create a universe when using nav. att. 0MATL_TYPE in the query

Dear experts,
A few days ago I posted a message in the BO General Category due to this error and I was adviced to install SP19 in BW (3.5). We've allready installed it but the issue is still arising. I am posting this thread now in this category since maybe the other category was too general and this one a little bit more specified.
The error we are having is the following:
We are having an issue when trying to create a universe over a BEx query which uses navigational attribute 0MATL_TYPE of 0MATERIAL (0MATERIAL__0MATL_TYPE).
No matter where do we insert this nav. attribute in the query (lines, columns, free characteristics...) that we are not able to create the universe. We receive a message when trying to create it such as "error without message"
We have other navigational attributes from several characteristics which are not giving us any problems in universes, just nav attributes 0MATL_TYPE and a Z characteristic (ZMATPR) which is the same as 0MATL_TYPE (it is defined the same way, not related).
We are working with:
BW 3.5 - SP19, BEx 3.x
BOBJ XI 3.0 (without service pack or fix pack)
Does any one have any clue on what could be the reason for this issue??
Thanks in advance for your interest!
Best regards!!!!
Cecilia

Hello Ingo,
First of all thanks for your help, since we are really concerned about this issue.
We have been analysing the file you have talked us about. The thing is that a week and a half ago we had to write an OSS message to SAP concerning another issue, and we were recommended to install note 1260004 which involves editing the registry in order to show SOFA logs, and if we have understood correcty, the file you have given us modifies as well the server registry in order to show sofa logs.
Does the file you have given us includes new information in the SOFA logs, what is the difference between what we have changed with the SAP note and what you have given us?
Nevertheless, we have retrieved two logs from two executions (having navigational attribute 0MATL_TYPE in the query from which we want to create the universe) in case you could help us to interpret the informations given since we are not able to understand it. (You can seen them below my signature.....haven't find a way to attach files....sorry....)
Thank's very much in advance for your help!!!! This is so disconcerting.......
Best regards!
No way , I cannot copy the logs since the message format is destroyed when I copy it..... If you need it please inform me and we will send it to you!
Thanks again for the help!!!
Cecilia
Edited by: Cecilia Guerra on May 11, 2009 1:56 PM
Edited by: Cecilia Guerra on May 11, 2009 2:09 PM

How to create bootable USB when using spinrite

Dear Fellow Community Members
I hope you can help me here as I'm stumped on how to actually get spinrite to run as I'm stuck at the dos c:
I have a Thinkpad E530 on windows 7 OS.
Windows no longer boots because of numerous bad sectors on the HDD.
I want to retrieve/recover files which were created since the last backup.
A friend in the tech industry recommended 'spinrite' which I've purchased.
I've followed the instructions on the website (https://www.grc.com/sr/faq.htm) to create a bootable USB with doswin98 files loaded.
I didn't go through the config.sys step when creating the bootable USB because the PC no longer works.
When I boot the PC with the USB HDD up via F12 command/boot menu, I get the following:
Microsoft (R) windows 98
C:\> spinrite
Bad command or file name
C:\>
Can someone help me with the next step/commands to trigger spinrite to run? Or is there something I've missed?
Thanks in advance.

Hello and welcome,
Are you familiar with/comfortable with Linux? I can't help you with the Win 98 approach you're using, but I am able to boot a Spinrite img using grub2 and memdisk on a flash drive.
I just finished a rather long article (not fully proof-read yet) about bootable flash drives that includes booting Spinrite. It's much too long to post here so I'll link it: A FOB STORY: some notes on bootable flash drives
The Spinrite part of the article is sort of buried in the mess. If you're not comfortable with Linux and low-level stuff like installing a boot loader on a flash drive, it's probably not for you. Better to wait for help with the technique you're using.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

ITunes creating shortened tracks when using 'create AIFF version'

Similar Messages

Maybe you are looking for