ITunes decoder settings don't work

I've got the problem that I can't change the settings in the decoder. I hope I have the right names, since I only work with the German version. I mean when I want to change the decoder using my own settings, iTunes just doesn't do anything for ACC-format but for other formats (like mp3) it opens the dialog correctly, also I found that files that I deleted out of the library and marked them to trash (I hope you understand what I mean), aren't going there at all, they just stay in the library.
I downloaded iTunes from Apple and installed it. The last problem now seems to be past, but my first problem still exists. Any ideas?
Thx

I have a similar problem to that. Sometimes that little preview button (to listen to music or watch trailers) doesn't work, although it's clickable. This happens mostly while using genius recommendations, but at times also while browsing the store. Today I bumped into another error/bug, where the display of the store page was somehow corrupted (see attached image below). That error is fully reproducible and appears when you click for more genius recommendations. Couldn't find any posts in the support section regarding these issues. Have all latest iTunes updates installed and using OS X 10.6.7 (also up to date).
Thanks in advance if anyone had these errors before and/or can provide any help.

Similar Messages

  • ITunes and Quicktime don't work on Windows 7 64-bit

    iTunes and Quicktime don't work on Windows 7 64-bit. I tried to uninstall and install the package according to Apple support article (http://support.apple.com/kb/HT1923) but still the same problem. I even tried to stop the Bonjour, it didn't help either. When I try to run either iTunes or Quicktime I get a Windows error message "iTunes has stopped working", with details like this:
    Problem signature:
      Problem Event Name:          BEX
      Application Name:          iTunes.exe
      Application Version:          10.3.1.55
      Application Timestamp:          4deec351
      Fault Module Name:          StackHash_0a9e
      Fault Module Version:          0.0.0.0
      Fault Module Timestamp:          00000000
      Exception Offset:          00000000
      Exception Code:          c0000005
      Exception Data:          00000008
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
    Any suggestions?
    Thanks.
    Sergio

    Taken as a whole, the symptoms suggest that another application (other than QuickTime itself) has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    Open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • My screen display settings don't work right

    My screen display settings don't work.When i try to set to not sleep it still sleeps.When i set to sleep and show pictures it works for a few mins then sleeps and won't scroll my pics at all just a black screen.Why? Does anyone else have this problem?

    Screensaver (e.g., showing pictures instead of the desktop) and Display Sleep and Computer Sleep are all set independently. You need to be sure that you have set each and every one of these correctly or you will get unexpected results.
    There is also the ability to require a password after an interval, and that is also independent of all the others, and is in
    system preferences > security.

  • Windows Power Management settings don't work with ITunes

    Purchased a refurbished Dell Optiplex system a few weeks ago with a 3.2 Ghz Pentium processor, 1 gigabyte of RAM, and 160 GB of hard drive - so a nice, new, fast system running Windows XP.
    I set my Power Management settings to go to screen saver after 20 minutes, and power down after 45 minutes. It worked just fine for a month, and the day I downloaded Itunes onto this computer, those settings do not work.
    I have reset them.
    I have changed them (to as little as one minute).
    I have changed them back to the original settings.
    I have rebooted my computer.
    I have run 2 different spyware programs (Spybot and Adaware) as well as run an anti-virus scan (TrendMicro Housecall).
    Nothing has changed, and my only conclusion is that Itunes is somehow interfering with the power settings for my computer and monitor. This is rather frustrating, as I'd like my computer to shut off on its own if someone walks away (I can't trust my kids to log off on their own).
    Any ideas on what the problem might be?

    Hi, I just bought my iPhone a couple of days ago and am having the same problems.
    I have a Macbook at home, but need to be able to sync with my work computer for contacts and calendar. At work I'm running on Windows XP Pro SP 2 and MS Outlook 2003 SP 3. I've made sure to update all MS software. I'm running on iPhone 1.1.3 and iTunes 7.6.
    My contacts sync fine, but, so far, no luck with my calendar. I've gone through the trouble of completely deleting everything off my calendar and am trying "test" appointments to no avail. What's really frustrating is that I've logged out of my ID on this computer and logged in using a test ID. I can successfully sync a test appointment following those steps.
    Tech support tells me that since I'm successful under those conditions, it must be a corrupt entry on my main calendar. But, as I've mentioned, I deleted everything I can find off my main calendar and am still not able to get it to sync successfully.
    This is quite frustrating.

  • ITunes 5.0.1 installation -- iTunes and Classic don't work

    I was downloading the latest updates a few days ago, which included iTunes 5.0.1. Unfortunately, my computer crashed as the iTunes file was downloading. After restarting, I downloaded iTunes 5.0.1 again.
    Now, my iTunes just bounces once when I click on it, but it doesn't open. Also, all of my OS 9 Classic applications try to start up, but the message:
    "Do you want to use Classic with less than the recommended amount of RAM? It is recommended that you have at least 128MB of RAM in your computer."
    ...pops up instead. Clicking 'continue' or 'cancel' causes Classic and my application to quit.
    So, neither Classic 9 or iTunes 5.0.1 works for me right now. I've tried the fixing the disk permissions thing, and things still don't work. I've also tried to reinstall iTunes, but nothing seems to work.
    I'm on an iMac G4 with 768MB DDR SDRAM and 1.25 GHz....and not able to listen to my music.

    I am running 6.0.1.3. Every time a new version comes out, I install it immediately in hopes that it will support my cd drive.
    gaah. a few of these were fixed by 6.0.0.18 and 6.0.1.3, but clearly not all ...
    okay, i think it's best if we get you reposted over at "Importing & Burning in iTunes for Windows". (i'm not trying to get rid of you. it's just that i've only been able to vist there sporadically over the past few weeks, and i am well behind on the state of the art with dealing with your particular situation.)
    include the following information in your post:
    (1) what the error message says (word for word if possible).
    (2) run your itunes "Help > Run CD diagnostics ..." and paste the complete results of that into your post.
    (3) if the CD diagnostics stops with the line "found aspi32 running", also include in that post the make and model number of your drive. to find that, right-click "My Computer", select "Manage", click "Device Manager" and expand the CD drives entry.
    good luck with the CD gurus! (sorry, may not be able to get over there to check on your progress for a while.)
    love, b

  • Outlook Express 12-28-11 Email Changes to Settings don't work

    Verizon Email of 12/28/11 told us to make changes to Portal settings of Outlook Express
    The intro tells us how much they want to "enhance our online experience". Then at the bottom, they tell us to not respond to the email. Why don't they have a return email when people start having problems? Probably because they would be swamped with complaints.
    Worked on this o ver two hours yesterday on my 4 email accounts on 3 computers
    As usual, the Verizon instructions are wrong at http://verizon.com/emailsettings
    They must never test this stuff before they publish it
    Per the above instructions, I changed the  Outgoing Portal to 465 and checked the SSL box for that portal
    Set the Incoming Portal to 995 from the existing 110 and checked that SSL box
    Outlook express would time out waiting for Verizon to connect for outgoing messages
    I had changed the Outgoing Portal to 587 per Verizon instructions in 2009 (I document everything and keep it!)
    So, I reset that with the Outgoing SSL still checked: still timed out
    Unchecked the Outgoing SSL and everything worked
    The settings that are working now:
    Outgoing Portal 587 with SSL unchecked
    Incomong Portal 995 with SSL checked

    I agree - so much of what Verizon does, doesn't work. Their instructions for Windows Vista, Windows Mail say:
    Setting up and updating your Verizon Online email with Vista™ Windows Mail Setting up
    Open Mail.
    From the Tools menu, select Accounts.
    Select Add.
    Select Email Acount and then click Next.
    Enter the name to be displayed on outgoing messages and then click Next.
    Enter your email address, and then click Next.
    Type incoming.verizon.net in the Incoming mail (POP3)field.
    The Incoming Server (POP3) should be set to 995.
    For Incoming mail (POP3), check the box that says “This server requires a secure connection (SSL)”.
    Type outgoing.verizon.net in the Outgoing mail (SMTP) field.
    The Outgoing Server (SMTP) should be set to 465.
    For Outgoing mail (SMTP), check the box that says “This server requires a secure connection (SSL)”.
    Click Next.
    In the User namefield, type your Verizon Online user name.
    In the Passwordfield, type your password.
    Check the Remember passwordcheckbox. (If you do not check this box, you'll be prompted for the password when you access your mailbox.)
    Click Next and then click Finish to close the window.
    However, when you get to the "setup email servers" page at step 7 there is no check box forselecting an SSL connection for either Incoming Mail or Outgoing mail. Aside from the POP3 dropdown and the 2 address boxes, there is only a 4th box where you can check "Outgoing server requires authentication". Whazzup? What Windows Mail setup are they looking at?
    Given the problems people are having, I guess the best thing is to ignore the Verizon email warning and when it fails, just switch to Comcast.

  • Playback Output settings don't work

    Playback Output settings are not working properly with one particular user account on a shared Mac. FCP is not routing video and audio to the external monitor and speakers even though the correct playback settings are set in the A/V Devices tab of Audio/Video Settings. FCP routes video only to the Mac's screen and audio to the Mac's internal speaker.
    With all other user accounts on the same Mac, with the same settings in the Audio/Video Settings, the playback works fine.
    What am I doing wrong?

    Try all this:
    #8 External Monitor Viewing.
    Shane's Stock Answer #8:
    A simple path is mac > firewire > camera or deck > rca cables > tv
    Then start up your camera and tv, then open fcp.
    Then go View > External video > all frames
    Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
    Shane

  • Email settings don't work, can't receive or send email

    No matter how many times I change my Outlook email settings for Verizon, the new settings have never worked.  I used to be able to at least receive email, but for many months I have not been able to send email.  I have called support and emailed Verizon and no one has been able to help.
    So now as of 11/11/2013, I can't receive or send email and I have tried to change my settings to the new settings, and nothing works.  I have gone to verizon.com/emailsettings for step by step instructions, all to no avail.
    I also have comcast.net and my own website email in Outlook  and now NONE of my email accounts work as of 11/11/2013.  It appears Verizon is the key to my problems.
    Any thoughts?

    Maryde wrote:
    No matter how many times I change my Outlook email settings for Verizon, the new settings have never worked.  I used to be able to at least receive email, but for many months I have not been able to send email.  I have called support and emailed Verizon and no one has been able to help.
    So now as of 11/11/2013, I can't receive or send email and I have tried to change my settings to the new settings, and nothing works.  I have gone to verizon.com/emailsettings for step by step instructions, all to no avail.
    I also have comcast.net and my own website email in Outlook  and now NONE of my email accounts work as of 11/11/2013.  It appears Verizon is the key to my problems.
    Any thoughts?
    Verizon should have no impact on your ability to use Outlook with your comcast.com account.  Verizon is only providing the pipe to Comcast, and I can get there there just fine.  Something must have been changed in your Outlook setup for your Comcast account (which is separate from the settings for your Verizon account) or Comcast must have changed something that broke your Comcast settings.
    If you provide your exact Outlook settings (inbound and outbound including servier names, ports, and SSL settings), perhaps someone can help.
    Also, can you successfully use the Verizon webmail to access your mailbox?

  • Your new email settings don't work...

    I recently received an email from Verizon directing me to a website to update my email server settings.  I'm 99% sure this was a genuine Verizon email so I tried their suggestions to change my POP3 and Outgoing server names and port numbers.  The new settings DO NOT work - either outgoing or incoming.  So I set them back the way they were.
    What's up with that??

    If you were trying to activate SSL on the 1/5-1/6  then the problem was with some Verizon servers.
    It should work again now.
    The reason for using SSL is that your mail is then sent/received encrypted.  Without SSL its all in the clear between you and Verizon's servers.  Its particularly important to use SSL if you are not always using your home connections, e.g. from Laptops and other portable devices.
    Only difference in the settings should be the port numbers and the SSL setting.
    Various people have mentioned running into problems and solved them by.
    Reviewing and correcting mistakes in their settings
    Closing and reopening their Mail program.
    For certain devices, restarting their devices
    Checking their firewall settings
    Increasing the timeout value in their mail program
    One known problem introduced by using SSL is that many SPAM detectors no longer work.  At least one that works requires that you leave the mail settings in your mail program alone, but then configure the change instead into the anti-SPAM program.  I.e, it with communicate with SSL but the mail program within your machine receives in the clear.

  • ITunes radio links don't work on Windows 7

    With the lastest iTunes upgrade to iTunes 1.1.3.8 on my Windows 7-based PC, Apple removed the only link on the iTunes Store that connected me to iTunes Radio. I've written to Apple support and was told it has to do with my firewall, but that's not true because  I restared my computer and tried the links again with no firewall running. The only application running was iTunes, and still all the links on the iTunes store pages to iTunes radio are dead. The only way I can access iTunes radio is by clicking on the iTunes guide link at the bottom of the page which opens a browser page with a link to iTunes radio. This works, but given the ineptitude of Apple on this matter, I suspect this link will eventually disappear, too. I first reported the radio's dead links a few days after iTune's launch, but the support team either isn't bothering to pass long bug reports to their developers or Apple doesn't care about those who use iTunes on Windows.
    I don't own this computer, it's my employer's. Planned to buy a Mac when the time came to buy my own system, but I'm no longer confident that Apple delivers what for me was its best selling point, excellent customer care. Sad.

    Taken as a whole, the symptoms suggest that another application (other than QuickTime itself) has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    Open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Print Settings Don't Work

    Update: This turned out to not be a Photoshop problem. I reverted to an earlier Restore Point in Windows and all is now well. Thanks!
    When I click Print Settings under Printer Setup and choose my paper type, resolution, size, orientation, and color management settings, they do not take effect after I click Okay.  Despite what I set, if I go back through Print Settings, the default settings are still there (Plain page, Normal-360dpi, default color mangement). If I print, dreadful color results.
    PS CC 64-bit Setup: In the main Photoshop Print Settings dialog box, I am using Photoshop Manages Colors, my specific printer profile, Normal Printing, Relative Colorimetric, and Black Point Compensation. In the Printer Setup section, my color printer is selected (Epson 2200). PC: Win 7 (64-bit), i7 3.40 GHz, RAM 16 GB. PS and Windows are on the SSD, with data on the HD.
    The same problem occurred with CS6 before I went to CC.
    Needless to say, I can't print. I'll appreciate your help--haven't seen anything like this and can't find anything about it on the Web.

    Timmy, since Microsoft no longer supports WMP 9 for Mac, you should just use Flip4Mac or VLC or other third party Windows Media player.
    I don't know how migrating from a PPC iMac system to an Intel-based iMac works, but you probably have a lot of non-Universal files on board your Intel-based iMac and that could be a problem.

  • All of a sudden my iTunes Movie trailers don't work

    I was wondering if someone can help me I am slowly going insane, last week my
    iTunes movie trailers was working beautifully, but this week when I press play
    the screen just dims and the trailer will not play, any help would be greatly
    appreciated

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Logging File Settings Don't Work

    Well, the Topic Summary above seems to explain the problem.
    We are trying to limit the size of the log files to 1000 KB (1 MB).
    We also want to keep 10 archived copies. Here are the settings that
    are being used:
    Maximum File Size (kb) 1000
    Maximum Number of Archives: 10
    For some reason the cfserver log file does not stop at 1 MB
    has reached over 6 MB.
    Any ideas? And as always, Thanks in Advance!!
    PS: And yes we are saving the settings before closing the
    Administrator.

    Thanks Grizz, but we are running 6.1 with all of the latest
    updates and Hot Fixes. I work for a state orgainization for their
    unemployment web site, and they upgrade not when a new release is
    issued, but when they can financially justify the expense.

  • Report and Notification Settings don't work anymore

    I click on Customize Settings and get:
    I can't configure anything!  Also all my reports have stopped being emailed to me!  Did the website 'redo' mess something up?

    Hi Dennis Marsden!
    Thank you for helping me.
    It doesn't work...
    I mean that when I try to drag a folder or the entire disk to the privacy tab, the privacy tab remaines empty...
    When I use the "+" button to browse the Finder and choose a folder, the privacy tab remaines empty too...
    I've got another problem too. Maybe both are tied, that's why I'll explain it :
    Sometimes, I am not able to rename a folder or a file... When I try to delete the name, it just doesn't work... And sometimes, it works properly...
    For example, yesterday, I created a new folder automatically called "New folder", and I couldn't change the name !
    But today, it has worked properly. But the problem happens so often, that today really is an exception...
    Thank you very much !
    Paaach'

  • ITunes 11 - Radiostations don't work

    Clicking a station opens randomly other stations in the list but not the one I want to listen to.
    Same happens with stations in Playlists.
    No problem before version 11.  Any fix ?

    I have a similar problem to that. Sometimes that little preview button (to listen to music or watch trailers) doesn't work, although it's clickable. This happens mostly while using genius recommendations, but at times also while browsing the store. Today I bumped into another error/bug, where the display of the store page was somehow corrupted (see attached image below). That error is fully reproducible and appears when you click for more genius recommendations. Couldn't find any posts in the support section regarding these issues. Have all latest iTunes updates installed and using OS X 10.6.7 (also up to date).
    Thanks in advance if anyone had these errors before and/or can provide any help.

Maybe you are looking for