Itunes did not install propery
i tried to burn a cd from itunes but it said that i didn't have any cd burning software. i haven't had any problem burning cd's before so i didn't get why it wasn't working. i tried reinstalling itunes, but when i finished and opened up itunes, it said: itunes was not properly installed. if you want to import or burn cd's, you must reinstall itunes. i tried reinstalling it again, but it still doesn't work. i have windows vista ultimate
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". (If you're running iTunes 11.0.x you'll need to bring up your menu bar first to see the Help menu.) Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)
Similar Messages
-
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Itunes did not install correctly. windows error 126
After being prompted to update to the latest version of iTunes, I did so. After the download I was given the following message: itunes did not install correctly error 7 windows error 126 - please attempt to re-install. I have attempted uninstall and deleting the software followed by new download and re-install. Same results each time. Please suggest a fix for this issue. Thank you.
Hi dchamp,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
ITunes did not install itself properly so I tried to reinstall it...
but when I selected "Repair Now", it asked if I completely wanted to remove iTunes. Should I select yes or no?
Hello FDEM,
Thank you for the details of the issue you are experiencing when installing iTunes. I recommend following article when experiencing issues with the installation of iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
If you are seeing a message with Error 7, I recommend the following article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Itunes did not Install on my pc
hello there people can somebody help me why i cant install my latest Itunes. Thanks
Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)
-
I also deleted all apple software on my pc.
A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes -
Newest update for itunes did not install properly, error 7 (windows error 126)
Is there anybody else out there that are having problems updating there itunes. I keep getting error 7 (windows error 126).
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Itunes did not install correctly error 7 windows error 5
the title is the error I get. I'm running on an older box, still has vista on it. I've followed several guides to fix this problem, including :
*uninstalling every apple program, in a ridiculously specific order, rebooting, making sure there are no folders left, then reinstalling as administrator
*doing the above but with the aid of byetunes
*repairing every iteration of the .net framework software compatible with vista
and still nothing. are there any further ideas on how to fix this?A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes -
Keep getting the same error message when I try to update iTunes. Error 7 (Windows error 126).
Hello scschwab,
I found an article with steps you can take when you are getting Error 7 when opening iTunes. I recommend following the steps in this article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Thank you for using Apple Support Communities.
Best,
Sheila M. -
A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it. I was able to reinstall itunes and it works fine including syncing with my ipod. However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program. This a nusance and really slows down getting to my email. From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes. I can't find a way to remove this MobileMe from my PC. I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it. Any suggestions on how this can be removed?
Do you have a backup that you can restore from? Your old hard drive seems to be the problem.
-
I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen. How to download bonjour? Do I have to re install itunes? If I do, will my music be lost?
I'd try the following document first:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store -
While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?
The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL -
My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!
b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymacGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Connected ipad to win7 computer to upgrade os as I needed to download an app. Says it has latest version but it did not install correctly. Ipad says hello,asks for language and location,wi-fi then options are set up as new ipad,restore from icloud or itunes backup. I think I have managed to backup over my good backup and lost everything. Ipad will not boot HELP
Hello RodneySmart,
Thanks for using Apple Support Communities.
From what I understand about your issues is that your iPad will currently not turn on. In attempt to resolve this issue please follow the steps in order below:
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
Alex H.
Maybe you are looking for
-
Slow performance for large queries
Hi - I'm experiencing slow performance when I use a filter with a very large OR clause. I have a list of users, whose uid's are known, and I want to retrieve attributes for all users. If I do this one at a time, I pay the network overhead, and this b
-
Adding namespace to order xml received from B2B
Hi there, I am receiving an order xml file from B2B. The order xml file does not have the namespace and I need to add namespace to it. Is there a way we can achieve this? Flow is B2B Adapter -> Mediator -> BPEL - ..... I am trying to do this in the m
-
Why can't I sync a playlist with only podcasts in it (to my IPHON4)?
Made a playlist with specific podcasts in it. (my weekly show series I like to listen to) But, it will not sync the podcast shows. It seems like I can only sync the 10 or 5 or xx latest shows. Seems kind of dumb that I can't create a list to be able
-
Installed QT 7.3 - now nothing works
Hello, I've been reading some of the posts and am having similar problems with QuickTime 7.3. Unfortunately, I upgraded to 7.3 and now nothing is working. I'm having issues with playback of QT videos, FCP exports and so on. A common error message has
-
I made a video and its 2.01 GB in iMovie. i want to put it on youtube but I want the best possible quality. The limit for youtube is 100MB whats the best way to compress my movie?