ITunes displays a BPM in the thousands
After updating to iTunes 7+, the BPM data is displayed in the thousands to tens of thousands instead of the tagged data rate set by my MixMeister BPM Anaylzer program.
The mp3s are tagged with id3 v2.4
Even though iTunes says the BPM is in the thousands, other progams, like Rane's Serato ScratchLive shows the correct BPM.
Why is this?
Are the numbers in some way related to the original BPM? Like 9400 instead of 94? Or are they completely random?
Similar Messages
-
Itune display "is waiting for the application to change the content"
I don't now why my itune display "is waiting for the application to change the content"??
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
My desktop PC recently crashed and I'm trying to recapture all of my iTunes library playlist and songs. I was able to successfully capture the library, however when I tried to play a song, all have the exclamation mark "!" on them and ask that I locate the song. I successfully located some, but there has to be an automatic way to do this, rather than finding each one. I have thousands of songs located in multiple folders of my exteernal hard drive and need a way to find all songs automatically. Can someone help? Thanks!
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Is there a way to see on itunes to all my songs the bpm and the key to every song?
I have some external programs such as BPM Analyser or Mixmeister that i can scan all my songs and have the bpm and the key to every song!Is there a Plug-in or something else that i can have that as a "category" on Itunes so dont need to open another program to do that?It will be useful to the same list to have all and don't need to use external program.If someone know something about that please help.
There's a field and column for BPM in iTunes - control-click on any of the column headers to see the full list, from where you can select the BPM column to appear. This if course presumes that the utility you're using will write the BPM information into that field; most will. There's no specific field for the key signature, so the utility would have to write that information into another field such as the Comments.
Regards. -
does anyone know why my ipod nano sixth generation is displayed in windows but not itunes? I followed all the suggestions but nothing.
I apologize if I write bad but I'm ItalianDoublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath.Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath. -
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps. -
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
iTunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!
Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??
If you have the latest version of iTunes you should not have to download the ipsw file separately as jalp suggests. iTunes will download it automatically.
This error (9) most often means that your antivirus or firewall (or router) is blocking access to Apple's servers. In rare instances it can also mean that the phone was hacked (or "jailbroken") to unlock it. If this is the case you must do a DFU restore, not Recovery Mode, as follows:
Reboot your computer
Disable your antivirus and firewall. If you has Kaspersky you may actually have to uninstall it, as it can never be turned completely off.
Connect the USB cable to a USB port directly on your computer, not to a hub. DO NOT connect the other end to the phone
Disconnect all USB devices except for mouse, keyboard and iPhone cable.
Launch iTunes
On the phone hold the HOME and SLEEP buttons at the same time for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button. The screen should be black. If it has an Apple logo this means you held both buttons too long. Release the HOME button and do it again.
While holding the HOME button connect the free end of the cable to the phone.
After a short while iTunes should recognize a phone in "recovery mode" (iTunes doesn't know the difference between DFU and Recovery modes, but the phone does)
Release the HOME button and don't touch the phone or the computer until the process completes or you get an error message. Ignore any displays on the phone.
If the error recurs the phone was probably messed up when it was hacked. This is not a hardware problem, or if it is, it isn't one you can fix.
You can try repeating these steps with a different computer and a different cable. If that fails also the phone is probably not repairable. -
ITunes displaying asian languages one day, boxes the next
My music is almost entirely made up of Japanese and Korean music. A lot of the song titles/band titles are in kanji and hangul, which iTunes used to not have a problem with. It just recently started displaying boxes instead of the characters and in my frustration I uninstalled iTunes. I reinstalled it two days ago and the characters were showing up fine! I was overjoyed, until I open iTunes today to find boxes again. Does anyone know what is going on and how to fix it?
So...you're referring to albums in the iTunes Store....not in your iTunes Library? I don't think anyone in this user forum can answer that question. Perhaps you should send feedback directly to Apple. You might try one of these links:
http://www.apple.com/feedback/itunes.html
http://www.apple.com/feedback/itunesapp.html -
Showing file location, i.e. the "Where" field in the main iTunes display
Is there anyway to show the file location for a song in the main iTunes display? This field shows up as "Where:" when one does a "Get Info" for a song.
Unfortunately you can't add a "Where" column to your library view. You have to find the information from Get Info or under File>Show in Finder on a Mac (there's probably something similar in the Windows version). If this is something you'd be interested in seeing in a future version you can send feedback/feature requests directly to Apple at this link: Apple Product Feedback
-
iTunes displays a message saying this ipod cannot be used because the apple mobile device service is not started. Help?
Try here:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Maybe you are looking for
-
How do I add an image above the navigation bar?
I'm trying to add an image above the navigation bar and can't seem to do it without covering the links. Does anyone know how to do that? Thanks!
-
I am making slideshows with FCP and I am looking to see how I can output a High Quality DVD. I have read from a few threads that when you make slideshows it is difficult to maintain the high quality especially since a TV is a lot lower in pixels than
-
Hi, Please go through the Sun Java Studio Creator site which is available at: http://developers.sun.com/prodtech/javatools/jscreator/index.jsp To know more about the Sun Java Studio Creator please have a look at the features and benifits which is ava
-
Cant find the vlan-membership command
I cant find the vlan-membership command on my 3700 layer 3 switch, i've searched google on whether the command has upgraded to a new syntax to no avail, i'm using GNS3 and the IOS is c3725-adventerprisek9-mz.124-25d.bin
-
I have a Macbook Pro that came with Snow Leopard. I upgraded to Lion, but due to mail issues, I just had to do a clean install from the disk. Where can I find the Lion upgrade now? All I can find in the App store is Mountain Lion. If I restore fr