ITunes does not import my video

I try to import videos in .mov-format into iTunes. It does not respond at all. These videos are > 9 GB. Could this be a reason?
Thanks for helping.

From iPad technical specisfications...
"Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format"
If the video output of your Sony doesn't correspond to these formats it will be necessary to convert those files to a format that iOS does support before you can import them into your iPad.

Similar Messages

  • Itunes does not add some videos

    itunes does not add some videos you create, are videos of my nephews and does not add, also new films and not to add that I can do .....

    this should help a lot. i've had the same problem w/ my ipod but i ended up fixing the problem and having about 5 videos on my ipod (until it was stolen). nevertheless, download a program called Videora Ipod Converter. once you're done installing it, click on Setup on the tabs to your left and then click Profiles. After that, create a profile with the following settings.
    Existing Quality Profiles: (create new profile i.e. ipod)
    Profile Name: (same as above)
    Mode: MPEG-4 > CBR Bitrate: 768kbps
    Resolution: 320x240 Framerate: 29.97fps
    Passes: One
    -audio settings-
    bitrate: 128kbps Channels: stereo Sample rate: input
    after that, you should be fine. make sure you use the one-click transcode because you wont be able to complete fully with the transcode option (i forgot why because its been such a long time since i had my ipod)

  • ITunes does not import certain files

    Hi everyone,
    I had to reinstall my WinXP system and therefore also reinstalled iTunes (v9.0.3.15). Now, when I imported my whole MP3 directory, iTunes did not import some albums without displaying any error message. When I realized that some albums are missing, I tried to import them using drag&drop from the Windows Explorer, using the "File-Import file", "File-Import directory" (or whatever these menu items are called in english...), but nothing works! iTunes simply does... NOTHING. No error, no file imported, no action at all.
    The files are fairly typical MP3 files: 192 kbps, 44kHz, ID3v1, ID3v2 both present, no DRM... And the most weird fact is: on my old WinXP system (same machine, but slightly older iTunes version) iTunes did import the files without problems!
    I have no clue why iTunes won't import them. Does anybody else have an idea?
    Many thanks in advance.
    Best regards,
    gehho.

    Hi ed2345,
    thanks a lot for proposing the MP3 Validator! This fixed my problem. For others having a similar problem: I used this software: http://www.gromkov.com/faq/repair/mp3_validator.html
    However, I must say that I am really annoyed about iTunes and Apple. I mean, what kind of design is it when you say: "We do not accept slightly invalid files, although every other player accepts them. And most important: We do not display an error message to the user, so that he/she has to find the problem him/herself! Ha!" This is really extremely bad user experience, and I always thought Apple was known for their innovative path, especially regarding user experience. Pfff...
    There are sooo many other things that annoy me; I think I will not buy any Apply product anymore. In my eyes, they have even overtaken Microsoft in being the most user-unfriendly company on the market:
    1) You HAVE to use iTunes to copy files on your iPod instead of just using the iPod as a USB drive. What is this for??? It's just to promote their stupid iTunes which again introduces new problems.
    2) iTunes obviously does not accept ID3v1 tags. It just displays all my MP3s which only have v1 tags as "Unknown". Come on, every other MP3 software supports ID3v1, why does not iTunes???
    3) The import process in iTunes is such a hassle. Instead of being able to observe a directory for new files, you have to add every single new album manually. Of course, only after you validated it... Moreover, you cannot add multiple directories at once using the menu options - you have to do it with drag&drop; and it took me some time to try that.
    4) EDIT: Another point just came to my mind: When importing a whole directory, iTunes is stupid enough to add all files once again, instead of just adding the new files. Therefore, you really have to know which album is missing in iTunes because otherwise you will have lots of files twice or three times or hundred times.
    OK, that's enough for now. I am just really pi**ed off because I was playing around with those "invalid" files for about 5 hours. Might also be that it's me who's the stupid one - if so, please tell me. But from a company like Apple, I expect a software which is easily handled even by absolute newbies, and I would not call me a newbie...
    Anyway, have a nice day everyone, and happy validating!
    Thanks again to ed2345! The comments above were not meant for you! It just came out of my fingers... Btw: As you asked my to pick my interpretation... I would pick "INCOMPETENT" - completely!
    gehho.
    Message was edited by: gehho

  • ITunes does not import all artists/songs from folder

    I have had several issues with getting itunes to import all the music I have. I have selected the folder that I want itunes to be associated with. But when I go into itunes not all the artists imported. However, if I select add a folder, and then the artist, it imports the artist. I have tried to add the whole folder again, but still does not import all the artist/songs. At first I didn't think that I had imported the CDto the folder, but then when I went into my music folder it was there.
    A couple of times when I have opened iTunes it was like starting over. I lost my playlists. I am not as concerned in getting those back as long as I won't lose all the changes I am now making. We also own two iPod shuffles, don't know if that makes a difference.
    Thanks inadvance for any information!

    I had a similar problem with a Jimmy Buffett album,I sent the iTunes store an e-mail described the problem including the album title and receipt number and within 24 hours they responded and had done a "reset" and problem solved.
    Give it a try

  • Most recent version of iTunes does not recognize my video iPod, what to do?

    I have a video iPod that I got last year and had it synced to my Windows XP on my desktop and I had recently synced it with my Macbook and had no problems with videos, pictures, movies, etc. I got a new iPod nano red and went to put music in it, but I had to download the latest version of iTunes. Just a few days ago I was able to still use both iPods on my MacBook. I just tried to put new videos on my video iPod and I get an error message saying: "the video was not copied, because this device does not support this file." I tried to authorize this computer, that didn't work. I tried converting the selected video, but I get an error(-50). I don't know what to do, any ideas? I appreciate anyone's help. THANKS!

    Kevin .... I'm with you. I have the same problem. iTunes 9.0 / Windows 7 ... how we actually talk to someone at Apple to get a fix? I got a brand new $800 windows cpu ... that is a brick when it comes to iTunes. If anybody can help us, please let us know.
    Baskin-Robbins

  • ITunes does not import WMA files

    I have iTunes 9 for Mac and it is not importing the sound files I have in WMA. Is there any setting I should activate so the conversion is automatically?
    I would greatly appreciate any help. Thanks!

    iTunes for Mac will not add and automatically convert WMA files, that function is only available with iTunes for Windows. On the Mac you need to convert the files prior to importing them, you could have a look at something like EasyWMA or Switch audio converter. These will let you convert the files to an iTunes compatible format:
    EasyWMA
    Switch

  • Itunes does not import cda?

    How to make my itunes import cda?

    You don't.
    CDA is simply a pointer on a CD to the beginning of a track on an audioCD.
    If you want to import an audioCD, select it in iTunes then click Import.

  • IPhoto does not import HD video/MTS files for Panasonic Lumix DMC-LX5.

    Hello, everyone. I'm using iPhoto '11 on an iMac i7. I recently bought the Panasonic Lumix DMC-LX5, which records HD video (AVCHD Lite). When I insert the memory card into my iMac, it recognizes and imports all photos. However, the videos are left on the memory card, and I cannot even view them in iPhoto. When looking directly in the memory card, I can see the videos (they are MTS files), but nothing will play them. Is there other software I must install to be able to view/edit these video files. I'd like to see them in iPhoto, and then edit them in iMovie like I was able to with my standard definition camera. Any help is appreciated.
    Thanks.

    I have the same camera as you. You can import the files, but you have to convert them manually first, witch takes a couple of secounds.
    1. Download and install the automator script from this blog and put it in your dock http://blog.sharkus.com/2010/04/avchd-lite-iphoto-importing.html
    2. locate the folder /Private/AVCHD/BDMV/STREAM on your memory card
    3. Drag your desired videofile (e.g. 000001.mts) on the automator script you put in your dock in step 1.
    4. whait (a couple of secounds, depending file size)
    5. Drag your new videofile (e.g. 000001.mts.m4v) to iphoto
    6. Finished
    Do not try to convert more than two files a once, then the script doesn't work properly.
    I hope apple will include support for mts-files very very soon!!

  • Audio does not import with video

    When I drag my clip to the time line the audio is gone!!! Help

    It would be quite helpful to know what format the footage is, what camera it came from.
    First thing to try is this, assuming AVCHD or similar footage type from SD card -
    Copy ENTIRE card contents to hard drive, not just video clips. In Premiere, Import using the "Media Browser". See if that helps
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Clip name does not import with video file

    I have a raw AVCHD file shot on a Sony FS-700. I imported all ~180 clips and moved them from the FCP X folder into a folder on my raid drive for use in multiple projects. The clip names at import are Clip #1, Clip #1, etc. etc. I then rename them in my finder window in their new location. The clips look great and playback great through Quick View and Quicktime. However, I run into a problem when I import them from their new location into a new event. The clip which is named 'FCP X Import' will import and be labeled 'Clip #89'.
    I would like to remain naming them in Finder if at all possible. This might be a Yosemite error or just my workflow. Workflow is: I edit directly after the event with imported media from the raw file and use the 'Clip #89' first then move, then rename to 'FCP X Import', then reuse for other features (which is where the problem occurs).
    Note: Clips do bring in Finder tags. For example, if I label it red the clip will retain that tag in FCP X
    Thanks.

    It would be quite helpful to know what format the footage is, what camera it came from.
    First thing to try is this, assuming AVCHD or similar footage type from SD card -
    Copy ENTIRE card contents to hard drive, not just video clips. In Premiere, Import using the "Media Browser". See if that helps
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • ITunes does not import songs from CD

    When I tried to import mp3 formatted songs into itunes, i get the following message: +An error occurred while trying to import the file "Track 1." The current encoder settings for bit rate and sample rate are not valid for this file.+ This has never happened before. How do I fix this?

    I just connected a new external cd/dvd drive and am having the same problem. Is your player working now, and if so what did you do to resolve the problem?
    Thanks!
      Windows XP  

  • HT2729 iTunes does not accept the video, although I have converted it in all types that it can accept. What can I do ?

    What can be done ?

    yeah, i too have the same problem, there are 66 videos in total but iTunes is syncing only 44 vidoes, it's not that the rest 20 are missing(location is correct and it plays on itunes as well), just only the videos that I used in the older iTunes are being sycned not the new ones... the new iTunes suck thou..
    using iPhone 3Gs iOS 4.3

  • ITunes does not recognize 5th Generation video iPod in WinXp

    PROBLEM: 5G iPod not recognized in iTunes (shows as removable hard drive in My Computer) via USB on HP Pavilion Notebook running WinXP. Latest error states insufficient power to run hi speed USB device on this computer. HP support replies that installed USB should comply to 480 Mbps hi speed standard. Trying to connect iPod via firewire results in "iPod can not be connected with firewire" error. Have tried the following steps before reaching this point:
    Description of iPod: 5G, 30 gig video iPod model MA002LL contains 1.2 gig data (282 songs, 4 videos, 0 pictures)
    Action: 5G iPod worked fine until connected to download purchased music 3 weeks ago.
    Result: iPod screen shows "Do not disconnect" iTunes does not recognize iPod.
    Action: Reset iPod (iPod works fine when not connected to any computer).
    Result: same as above
    Action: Recharged iPod overnight with wall outlet to confirm full charge.
    Result: same as above
    Action: Tried to run iPod Updater but iPod was not recognized by Updater (it does recognize iPod Mini and 4G)
    Result: same as above
    Action: Reinstalled latest version of iTunes.
    Result: same as above
    Action: Reinstalled COM interface for IPod Service several times.
    Result: same as above
    Action: Ran repair maintenance on iTunes (repair successful).
    Result: same as above
    Action: Uninstalled iTunes and iPod software, deleted their folders and bin files and cleaned out Temp directory, disabled virus protection and disconnected from network. Ran Windows Installer Cleanup Utility. (Uninstall successful)
    Result: same as above
    Action: Restarted and reinstalled iTunes and iPod Updater
    Result: same as above
    Action: Diasabled all non critical items in start menu
    Result: same as above
    Action: Uninstalled all three USB controllers
    Result: same as above
    Action: Reinstalled USBs
    Result: same as above
    Action: Tried to connect by firewire
    Result: Error this device cannot be connected by IEEEE use USB cable.
    Action: Talked to HP support to confirm USB standards on Pavilion Notebook.
    Result: USB should read all 3 standard data speeds up to hi speed 480 MBps
    Action: Tried 5G iPod on 2 other PC desktops with WinXP with powered USB 2.0 ports
    Result: iPod shows "Do not disconnect" iTunes does not recognize iPod and both computers respond with the following error (which is not received on the notebook) "insufficient power to run hi speed USB device on this computer" both Desktops are older than the Notebook and have older versions of USB 2.0.
    Action: Tried it on my iMac G4 thinking I could reformat it. Mac understandably does not read it as a drive. I tried the following three connections:
    1) Firewire connection: iPod screen shows: firewire connection is not supported; 2) Powered USB port connection: drive is not recognized by Mac and iPod screen shows do not disconnect; 3) Unpowered USB port connection returns an error of "USB Low power notice" on Mac monitor and iPod screen shows menu but won't connect to Mac.
    QUESTIONS:
    Has the 5G iPod reached a point where it now pulls too much power to be read by USB? Is HP not giving me correct specs regarding the performance of the Notebook's USB? Why can I update my iPods with firewire on my Mac but not the PC? Any suggestions regarding what I should try next?
    Thanks.
    HP Pavilion dv notebook Windows XP

    Solution was found: HP was encountering a conflict with a trial version of Symantec Security Center and Norton Anti-Virus causing an incomplete install of iTunes.
    The following actions resolved the problem. Uninstalled both Symantec applications, uninstalled QuickTime 6*, installed QuickTime 7.1.3 (iTunes would not install successfully prior to this step, seems redundant but worked), installed iTunes 7.1 (with Quicktime 7.1.3 again), connected iPod 5G which was finally recognized, received error that iPod was currupted, restored iPod and is now working fine.
    I hope that this helps someone else with similar video iPod problems.

  • My itunes does not get the names of all tracks which i import.

    When i import a cd into itunes, it does not get any track names. Why is this.
    Also, itunes does not connect to the music store. It tells me that i should check my connection etc etc. Are these problems related, and what can i do to fix it?

    Let me guess, did you just install/upgrade iTunes?
    If so, then it's surely your security software (firewall, web accelerator, privacy filters, etc) that is blocking iTunes.
    The iTunes "upgrade" is actually an uninstall, then total new install, of iTunes and QuickTime. Many security packages such as Norton, Zone Alarm, Google Web accelerator, McAfee, PCillin (...the list is long) see this new iTunes install as a malicious threat, and block out the previous settings without telling you.
    Go to your security software vendor's website and see if they have directions for allowing iTunes & QT back in the list of programs allowed to access the internet.

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

Maybe you are looking for