ITunes does not recognize 5th gen. iPod 60gb

It mounts on my desktop, but *does not show up under the devices tab in iTunes* (v9.2). I'm running Snow Leopard 10.6.4 on an iMac (2.4 Ghz Intel Core 2 Duo with 4GB of RAM).
Any help is appreciated.
THANKS!
Dennis

Hello Dennis,
I would start with this article, even though it may not seem entirely applicable. It contains some of the basic troubleshooting steps for this situation. Make sure to work through each and every section as needed.
[iPod not recognized in iTunes and Mac desktop|http://support.apple.com/kb/TS1410]
Otherwise, take a look at this article as well if need be.
[iPod does not appear in iTunes or iPod updater in Mac OS X|http://support.apple.com/kb/TS1461]
Another solution may be to Reformat the iPod. For instructions on how to do this, see this article.
[How to Reformat Your iPod on a Mac|http://b-rockprogramming.blogspot.com/p/ipoditunes-tutorials-and.html]
Hope this helps you get started.
B-rock

Similar Messages

  • ITunes does not recognize 5th Generation video iPod in WinXp

    PROBLEM: 5G iPod not recognized in iTunes (shows as removable hard drive in My Computer) via USB on HP Pavilion Notebook running WinXP. Latest error states insufficient power to run hi speed USB device on this computer. HP support replies that installed USB should comply to 480 Mbps hi speed standard. Trying to connect iPod via firewire results in "iPod can not be connected with firewire" error. Have tried the following steps before reaching this point:
    Description of iPod: 5G, 30 gig video iPod model MA002LL contains 1.2 gig data (282 songs, 4 videos, 0 pictures)
    Action: 5G iPod worked fine until connected to download purchased music 3 weeks ago.
    Result: iPod screen shows "Do not disconnect" iTunes does not recognize iPod.
    Action: Reset iPod (iPod works fine when not connected to any computer).
    Result: same as above
    Action: Recharged iPod overnight with wall outlet to confirm full charge.
    Result: same as above
    Action: Tried to run iPod Updater but iPod was not recognized by Updater (it does recognize iPod Mini and 4G)
    Result: same as above
    Action: Reinstalled latest version of iTunes.
    Result: same as above
    Action: Reinstalled COM interface for IPod Service several times.
    Result: same as above
    Action: Ran repair maintenance on iTunes (repair successful).
    Result: same as above
    Action: Uninstalled iTunes and iPod software, deleted their folders and bin files and cleaned out Temp directory, disabled virus protection and disconnected from network. Ran Windows Installer Cleanup Utility. (Uninstall successful)
    Result: same as above
    Action: Restarted and reinstalled iTunes and iPod Updater
    Result: same as above
    Action: Diasabled all non critical items in start menu
    Result: same as above
    Action: Uninstalled all three USB controllers
    Result: same as above
    Action: Reinstalled USBs
    Result: same as above
    Action: Tried to connect by firewire
    Result: Error this device cannot be connected by IEEEE use USB cable.
    Action: Talked to HP support to confirm USB standards on Pavilion Notebook.
    Result: USB should read all 3 standard data speeds up to hi speed 480 MBps
    Action: Tried 5G iPod on 2 other PC desktops with WinXP with powered USB 2.0 ports
    Result: iPod shows "Do not disconnect" iTunes does not recognize iPod and both computers respond with the following error (which is not received on the notebook) "insufficient power to run hi speed USB device on this computer" both Desktops are older than the Notebook and have older versions of USB 2.0.
    Action: Tried it on my iMac G4 thinking I could reformat it. Mac understandably does not read it as a drive. I tried the following three connections:
    1) Firewire connection: iPod screen shows: firewire connection is not supported; 2) Powered USB port connection: drive is not recognized by Mac and iPod screen shows do not disconnect; 3) Unpowered USB port connection returns an error of "USB Low power notice" on Mac monitor and iPod screen shows menu but won't connect to Mac.
    QUESTIONS:
    Has the 5G iPod reached a point where it now pulls too much power to be read by USB? Is HP not giving me correct specs regarding the performance of the Notebook's USB? Why can I update my iPods with firewire on my Mac but not the PC? Any suggestions regarding what I should try next?
    Thanks.
    HP Pavilion dv notebook Windows XP

    Solution was found: HP was encountering a conflict with a trial version of Symantec Security Center and Norton Anti-Virus causing an incomplete install of iTunes.
    The following actions resolved the problem. Uninstalled both Symantec applications, uninstalled QuickTime 6*, installed QuickTime 7.1.3 (iTunes would not install successfully prior to this step, seems redundant but worked), installed iTunes 7.1 (with Quicktime 7.1.3 again), connected iPod 5G which was finally recognized, received error that iPod was currupted, restored iPod and is now working fine.
    I hope that this helps someone else with similar video iPod problems.

  • Itunes does not recignize 5th generation ipod touch

    itunes does not recognize ipod touch 5th generation. It shows up as a camera under my computer.

    I had the same problem. My new ipod touch 5th generation was not recognized by iTunes.  I checked the Apple Support solutions and the first step they recommended was to update iTunes to the latest version.  I did just that it now it all works beautifully.  I am using Windows 7.

  • Most recent version of iTunes does not recognize my video iPod, what to do?

    I have a video iPod that I got last year and had it synced to my Windows XP on my desktop and I had recently synced it with my Macbook and had no problems with videos, pictures, movies, etc. I got a new iPod nano red and went to put music in it, but I had to download the latest version of iTunes. Just a few days ago I was able to still use both iPods on my MacBook. I just tried to put new videos on my video iPod and I get an error message saying: "the video was not copied, because this device does not support this file." I tried to authorize this computer, that didn't work. I tried converting the selected video, but I get an error(-50). I don't know what to do, any ideas? I appreciate anyone's help. THANKS!

    Kevin .... I'm with you. I have the same problem. iTunes 9.0 / Windows 7 ... how we actually talk to someone at Apple to get a fix? I got a brand new $800 windows cpu ... that is a brick when it comes to iTunes. If anybody can help us, please let us know.
    Baskin-Robbins

  • ITunes 7.0.0.70 iPod Update 1.2 does not work - 5th Gen iPod Video

    All,
    I have seen numerous threads on many sites highlighting this issue and yet there seems to be no resolution.
    I have tried most of the suggested workarounds, namely:
    -5 Rs
    -Unplug / Plugin when screen returns to menu during upgrade attempt
    -Restore to earlier firmwares and iTunes versions and then upgrading
    -Erase & Sync
    Nothing works!!!
    Has anyone had any luck in resolving?
    Is anyone in Apple taking notice of their users requests for help?
    Please assist?

    I have not been able to see or hear the podcasts due to my IPOD rebooting everytime until now. I'll tell you a solution and guess what..it won't cost you 59.00 dollars like they wanted from me...oh by the way did I say that I bought two 30 GIG Video IPODS in June and now they wanted 59.00 for support!!!! B.S.!!!! Well, here is a free temporary solution: If you are trying to listen to or see PODCASTS do they following:
    1. Watch or listen to them in ITUNES for a couple seconds (You have to watch or listen to them pointing to the PODCAST area of your IPOD)
    2. then you should be able to EJECT your IPOD and listen to them as normal again.
    NOTE: Each time you download another podcast you will have to do this again until the idiots (who by the way wanted 59.00 dollars for support three months after I just spent 600.00 dollars on these 2 lovely video ipods) fix the problem.
    And guess what...i didn't charge you one red cent for this lovely advice! Now that is what i am calling customer service! Hey Apple do you see that, i just helped all these people without having to get RICH off them. Loyal Customers deserve good customer service..get with the picture!

  • After upgrading to Lion , itunes does not recognize my ipad, ipod touch anymore.

    Yesterday I updated to Mac OSC Lion on my original Intel Macbook (the first Aluminum Macbook) with 4GB RAM.
    Today I had a run in with my ipad and ipod touch, both of whom are not being recognized by itunes anymore.
    My ipod shuffle and classic are still being recognised and do sync.
    I have read through the support pages and annoyingly even factory-reset my ipad, which cannot be used anymore due
    to itunes not recognizing the device !
    System profiler does show either ipod or ipad being connected to the usb port. Resetting of the devices did not help (see above)
    Any clues to this inconsistent behaviour differentiating between classic ipods and ipod touch/ipad ?
    js.

    update: It seems like the XCode update did interfere with itunes. I reran the XCode install this time with itunes not running. This seems to update all necessary drivers and Library items correctly.
    After this IPad and IPod touch were working fine again.

  • ITunes does not recognize my (non-iPod) music player

    I am trying to use a Creative mp3 player with iTunes. The device is connected via USB and shows up in Windows Explorer but is not shown as a Device in iTunes.
    I have installed the latest version of iTunes (7.3.2.6).
    Any suggestions?

    Yes - I tried both of them - they are cheap shuffle wanna bees (perfect as they will be lost within a month) - they both have 5 sample tunes on them that I can play in media player - I would like to have the itunes available (as they are already paid for) for the kids to download as they like (there is some common music) How? and where should I send this music so I can sync the music to these 2 shuffles (which product would you advise) ? I appreciate your help - these kids deserve it!

  • Hi all, itunes does not recognize my ipod touch 5th gen but it does recognize my ipod touch 3rd gen.?

    Hi all,
    itunes does not recognize my ipod touch 5th gen but it does recognize my ipod touch 3rd gen.?
    Windows 7 home premium, 64 bit, itunes 10.7.0.21, ipod 5th gen ios 8.3. I know I am not running the latest version of itunes for the
    ipod touch 5 gen. but at least with itunes open I would get a message stating cannot connect this ipod because I am not running the
    lastest version of itunes. That message would come up everytime I was charging said ipod with itunes open. I just updated to iso 8.3
    and now I don't get that message anymore when I have itunes open.I tried turning off ipod/computer/restarting, nothing. I tried going
    to administrator/services/apple moble device and stop/start service nothing. Device manager shows the drivers are installed.
    Any info will be greatly appreciated, thanks.
    Fish

    Hi all,
    itunes does not recognize my ipod touch 5th gen but it does recognize my ipod touch 3rd gen.?
    Windows 7 home premium, 64 bit, itunes 10.7.0.21, ipod 5th gen ios 8.3. I know I am not running the latest version of itunes for the
    ipod touch 5 gen. but at least with itunes open I would get a message stating cannot connect this ipod because I am not running the
    lastest version of itunes. That message would come up everytime I was charging said ipod with itunes open. I just updated to iso 8.3
    and now I don't get that message anymore when I have itunes open.I tried turning off ipod/computer/restarting, nothing. I tried going
    to administrator/services/apple moble device and stop/start service nothing. Device manager shows the drivers are installed.
    Any info will be greatly appreciated, thanks.
    Fish

  • HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

    After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • ITunes does not recognize iPod (3rd gen?) even after trying everything...

    I have searched and not found this exact problem on any of the forum pages. My computer (PC) recognizes my iPod as an external USB drive. It is completely charged up (from the AC power). No error messages. Screen shows the "updating - do not disconnect symbol" constantly while docked but the pod does not show up in iTunes at all. I can get the main screen (menu) page by disconnecting the USB device through Windows, but when I try to select any of my data on the pod it shows nothing downloaded on the device. I've tried everything in the support section (most recent version of iTunes, checked that iPod service is running, reinstalled the COM interface for iPod service, deleted and reinstalled iTunes, etc. As a final resort, I "restored" the pod to factory settings using iPod Updater, but no joy...To say I'm unhappy is putting it mildly. Any suggestions before I jump out a window or something????
    Pentium III   Windows XP  

    Sorry for the curt/short explanations, but I am very frustrated.
    My computer recognizes my iPod. iTunes does not.
    iTunes does not recognize my other nano (2gb) or my friends shuffle. However, when my friend's shuffle is plugged into the computer, the iTunes window will pop up though I still can't see the actual device. On my nano and video, iTunes does not pop up.
    In response I have...
    I have reset my iPod.
    *no luck
    I have uninstalled an reinstalled the program 5-8x.
    *no luck
    I have run Spybot and Ad-aware just in case.
    *no luck
    I have changed the power management on my USB hubs.
    *no luck
    I have specified and changed the letter pathway of not only my iPod but my other usb peripherals.
    *no luck
    I have "reinstalled" the COM Interface about 5x after various changes.
    *no luck
    I have downloaded the recent iPod updater and that dealt with my iPod JUST FINE and then ran iTunes.
    *no luck
    I have selectively chose the with processes are on the startup.
    *no luck
    but for good measure, here are the processes running right now:
    taskmgr.exe
    svchost.exe
    firefox.exe
    Zboard.exe
    qttask.exe
    alg.exe
    ctfmon.exe
    lsass.exe
    services.exe
    winlogon.exe
    csrss.exe
    smss.exe
    explorer.exe
    iPodservice.exe
    zboardtray.exe
    spoolsv.exe
    iTunesHelper.exe
    wdfmgr.exe
    Programs like Anapod recognize my iPod. They both mount and execute processes just fine.
    Can anyone help me here??
    hp pavillion zd7360us   Windows XP Pro   iPod Video 60 GB and iPod Nano 2GB

  • Upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod

    I recently upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod. The iPod says "Do Not Disconnect" but the device is not listed in iTunes so it will not sync.

    Hey, we are having exactly the same problem! My old ipod died a slow death so I bought a new nano 16gb 4th gen and I can't use it as itunes isn't recognising any ipod being plugged into it. I've been through the whole support database and every USB port is working on the laptop, so I know the computer is recognising its there its just itunes itself - even removed and downloaded it again but no change! If anybody has any ideas what is going on please let me know!!!!

  • I have an ipod touch  and Itunes does not recognize device.  What can I do?

    I have an ipod touch  and Itunes does not recognize device.  What can I do?

    See:
    iOS: Device not recognized in iTunes for Windows

  • ITunes does not recognize my iPod Touch

    My iTunes does not recognize the iPod Touch , I connect to the computer and not loaded or recognized by the iTunes, I can do? and uninstall iTunes and went back to install, now I can do? Thanks.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • Ipod was corrupted i restored it now windows and itunes does not recognize

    one day i plugged my 80g classic in to charge and sync. itunes diagnosed my ipod as corrupted and said please click restore,so i did now my windows computer and itunes does not recognize it at all i have a new 1g shuffle and it works fine. wat do i do with the classic cause i miss the space and it still turns on and everything. Help!!!! Please

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

Maybe you are looking for

  • WebClient Error - Failed to log on to the comm. mgmt. software

    Hi, following the CR410 i have created a webclient profile/ framework, and assigned the profile to an org unit. now when try to open the webclient using crm_ic, i am getting the above error on the IDES system. <b>"Failed to log on to the communicatio

  • Not able to see specific tags for FSCM Credit Management on BP master data screen

    Hi All, I have already set up Collections & Dispute Management, I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any spec

  • How to Display HTML content in Discoverer Viewer?

    Hi, Is there any way to display html in the Discoverer Viewer 4i or 9i ? The HTML code could be stored in a CLOB, varchar2 field or also in a referenced HTML side. What I want is that the HTML code is already displayed in the Discoverer Viewer. I kno

  • Output type NEU

    Hi All, Scenario is like this we have one client where three company codes are dealt & po format is different for all the three. 1) company A uses NEU 2) company B used ZNEU Here i want to you help to know whether i need to have customized output typ

  • Double movies created in IDVD???

    Hi, I just tried the one step IDVD and created a number of DVDs via camcorder. Each completed DVD has two copies of the movie on it. I don't know why or how this happened. Any ideas? TIA Jerry (a MAC newbie)