Itunes does not recognize any calender to synchronize with
My computer is repared and has a new hard disk.
I have installed the latest version of iTunes and Outlook 2010 on my computer.
I want to synchronize my iPad with my computer, but iTunes does not recognize any calender to sync with.
In the old situation I synchronized my iPad with Outlook 2003. That worked fine.
During the repare-time my iPad has become leading.
How can I solve my problem
Hello SCorky,
The following article provides steps that can help get your devices back into iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen
Similar Messages
-
Itunes does not recognize any of my devices
I connect my iPhone or iPad(s) and Itunes does not recognize they are there. I have Itunes latest version. My last backup I was able to do was back in January. I tried to delete and reload itunes and that does not help. My computer recognizes my devices are connected and I can back up my photots. Just Itunes fails to recognize they are connected. ALL my devices have the latest software.
Hello SCorky,
The following article provides steps that can help get your devices back into iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?
You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/
-
when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?
Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Itunes does not recognize my Iphone 4. I did a restore on my phone about four months ago.. Does anyone have any suggestions as to what I can try?
try deleting these preference files
•C:\Documents and Settings\Your Username Here\Application Data\Apple Computer\iTunes
•C:\Documents and Settings\Your Username Here\Local Settings\Application Data\Apple Computer\iTunes
•C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info -
I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
ThanksThank you so much. Guess i just have to upgrade now.
-
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys -
Since IOS7,The synchronization itunes does not work any more
since IOS7, the synchronization itunes does not work any more....
Hi martinafromlimassol,
Welcome to the Apple Support Communities!
I understand that you iPhone has been dropped and the display no longer functions. In this situation, it may be necessary to have your iPhone 5 evaluated for repair. Please use the attached link for information on the process of having your iPhone evaluated.
iPhone Repair and Service - Apple Support
Best regards,
Joe -
Please, can anybody help? I am using a Windows phone. It is a samsung Focus S Smartphone operating windows 7.5....My computer is running Windows XP. I can use Zune just fine but Itunes does not recognize my phone whatsoever! I cant get help from Apple as it is an older phone I guess
I google search the phone you have, its NOT an Apple phone but a Windows Phone. It cannot be used by itunes at all.
pucheebaby wrote:
My computer is running Windows XP. I can use Zune just fine
You can use Windows Media Player or other third-party software to upload stuff to your phone but you can't use itunes. sorry.
To anyone that wants to know the phone pucheebaby is using: http://www.att.com/shop/wireless/devices/samsung/focus-s-black.html?WT.srch=1&ca gpspn=pla [scroll down on link for more info.]
Message was edited by: keeferaf -
I synced my iPhone 4 and now I am stuck in recovery mode. iTunes does n
iOS: Device not recognized in iTunes for Windows
Click the link for full instructions: http://support.apple.com/kb/ts1538
5. Verify that the Apple Mobile Device USB Driver is installed
If the device is not recognized while in Recovery Mode
Note: If your device is working on its own and is not in recovery mode, this set of steps is not for you; do not manually place the device into recovery mode.
Your device may not be recognized while in recovery mode. This can happen during an update or restore of your device. Typically when your device is in recovery mode, it will show the "Connect to iTunes" logo on its display. If iTunes does not recognize the device when in this state, try the following:
Open the Device Manager:
Windows XP: Click Start > Run. In the resulting dialog, type devmgmt.msc and press Return.
Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return on the keyboard. If Windows needs your permission to continue, click "Continue".
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type devmgmt.msc, and press Return.
Click the plus icon (Windows XP and Vista) or the disclosure triangle () (for Windows 7 and 8) next to Imaging Devices, Other Devices, Portable Devices, and Universal Serial Bus Controllers to expand these sections.
Check these sections for one or more entries called Apple Mobile Device (Recovery Mode). These entries may or may not have exclamation marks on them similar to the following:
If you see only one "Apple Mobile Device USB Driver" entry that has no errors on it:
If you see two "Apple Mobile Device (Recovery Mode)" entries with exclamation marks on them: -
My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it. When asked to encrpt the Shuffle I say no, but still not recognized. When I encrypt it, still not recognized (even after it was restored by iTunes). Any suggestions please?
Did you find a solution?
My touch is doing the same thing. -
ITunes does not recognize 5th Generation video iPod in WinXp
PROBLEM: 5G iPod not recognized in iTunes (shows as removable hard drive in My Computer) via USB on HP Pavilion Notebook running WinXP. Latest error states insufficient power to run hi speed USB device on this computer. HP support replies that installed USB should comply to 480 Mbps hi speed standard. Trying to connect iPod via firewire results in "iPod can not be connected with firewire" error. Have tried the following steps before reaching this point:
Description of iPod: 5G, 30 gig video iPod model MA002LL contains 1.2 gig data (282 songs, 4 videos, 0 pictures)
Action: 5G iPod worked fine until connected to download purchased music 3 weeks ago.
Result: iPod screen shows "Do not disconnect" iTunes does not recognize iPod.
Action: Reset iPod (iPod works fine when not connected to any computer).
Result: same as above
Action: Recharged iPod overnight with wall outlet to confirm full charge.
Result: same as above
Action: Tried to run iPod Updater but iPod was not recognized by Updater (it does recognize iPod Mini and 4G)
Result: same as above
Action: Reinstalled latest version of iTunes.
Result: same as above
Action: Reinstalled COM interface for IPod Service several times.
Result: same as above
Action: Ran repair maintenance on iTunes (repair successful).
Result: same as above
Action: Uninstalled iTunes and iPod software, deleted their folders and bin files and cleaned out Temp directory, disabled virus protection and disconnected from network. Ran Windows Installer Cleanup Utility. (Uninstall successful)
Result: same as above
Action: Restarted and reinstalled iTunes and iPod Updater
Result: same as above
Action: Diasabled all non critical items in start menu
Result: same as above
Action: Uninstalled all three USB controllers
Result: same as above
Action: Reinstalled USBs
Result: same as above
Action: Tried to connect by firewire
Result: Error this device cannot be connected by IEEEE use USB cable.
Action: Talked to HP support to confirm USB standards on Pavilion Notebook.
Result: USB should read all 3 standard data speeds up to hi speed 480 MBps
Action: Tried 5G iPod on 2 other PC desktops with WinXP with powered USB 2.0 ports
Result: iPod shows "Do not disconnect" iTunes does not recognize iPod and both computers respond with the following error (which is not received on the notebook) "insufficient power to run hi speed USB device on this computer" both Desktops are older than the Notebook and have older versions of USB 2.0.
Action: Tried it on my iMac G4 thinking I could reformat it. Mac understandably does not read it as a drive. I tried the following three connections:
1) Firewire connection: iPod screen shows: firewire connection is not supported; 2) Powered USB port connection: drive is not recognized by Mac and iPod screen shows do not disconnect; 3) Unpowered USB port connection returns an error of "USB Low power notice" on Mac monitor and iPod screen shows menu but won't connect to Mac.
QUESTIONS:
Has the 5G iPod reached a point where it now pulls too much power to be read by USB? Is HP not giving me correct specs regarding the performance of the Notebook's USB? Why can I update my iPods with firewire on my Mac but not the PC? Any suggestions regarding what I should try next?
Thanks.
HP Pavilion dv notebook Windows XPSolution was found: HP was encountering a conflict with a trial version of Symantec Security Center and Norton Anti-Virus causing an incomplete install of iTunes.
The following actions resolved the problem. Uninstalled both Symantec applications, uninstalled QuickTime 6*, installed QuickTime 7.1.3 (iTunes would not install successfully prior to this step, seems redundant but worked), installed iTunes 7.1 (with Quicktime 7.1.3 again), connected iPod 5G which was finally recognized, received error that iPod was currupted, restored iPod and is now working fine.
I hope that this helps someone else with similar video iPod problems. -
Itunes does not recognize my iphone 4 device
I bought a new computer, tried to install itunes, after three different people tried to help me, i finally got itunes to install, but when I plug my iphone into my computer, itunes does not recognize the device. I am trying to 1. upgrade my iphone soft ware to 10.5.3, utilize icloud, and perform basic functions of syncing my phone with my computer. Any help, anyone could provide would be appreciated.
Tank you,
RoseIf your iTunes is the latest version, restart your computer and reboot your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.
-
ITunes does not recognize my iPhone 4 or iPad 2
I bought an iPhone 4 and an iPad 2 yesterday... have not been able to use any of them so far as itunes does not recognize either of them on my machine.. have tried several times to restart the machine, reinstall iTunes etc etc.. I have a Sony Viao with Windows Vistas Home Edition, and of course am running as an Administrator.
Anyone has faced this problem earlier - any pointers would be greatly appreciated.
Regards,
SaurabhZanaters wrote:
I don't have this problem with my windows machine. Unfortunately, a new policy in the company requires that ITunes not be on your computer or you may be terminated. I've got one week to figure out why things are different so that I am good to go for the future.
First off, copy the entire /Music/iTunes/ folder from your work computer to an external drive.
Copy it to /Music/ on your personal computer.
Try using a USB port on the back of the computer.
If the devices are still not discovered, see this -> http://www.apple.com/support/iphone/troubleshooting/ -
HELP
My iPod classic (2007) 80 GB FROZEN SCREEN (Now Playing window showing the song that is suppose to be playing, will not respond to buttons, Will not SYNC, iTunes does not recognize it AT ALL when I plug it in. Will not shut off, will not charge... pretty frustrated, I updated it recently (within the last 10 days....Has anyone had similar experience? If so was it fixed? Please post any help for me... thank you... I am pretty frustrated right now.its fixed!! After posting my problem with the FROZEN ipod classic (2007) 80 gb a screen popped up with similar subjects that I did not find in my original search. 'Rich Fleming' in the community posted a suggestion to someone with a similar frozen issue and it WORKED when I tried it.
hold the 'menu' and the 'circle' buttons down at the same time, KEEP the pressed until the apple appears. and now it is working. Hope this helps others.
Maybe you are looking for
-
Script does not work after download
Hi, I have build a form in SAP enviornment using Adobe Life Cycle designer, while designing I have been using XML datasource and wrote scripts for different events on the elements of the form, the script works perfectly fine while designing, but f
-
Calling a procedure in select query.
I have created a procedure with three parameter one in parameter and two out parameter. I want to call this procedure in select statement.How can i do this? procedure is like this. CREATE OR REPLACE PROCEDURE p_payment_adjustment ( p_cons_ref IN VARC
-
hi friends, I am doing my project in grid computing.I am using RMI. but sometimes what happens is when i submit the jobs to the machines and after completion when i collect the values and display the output, sometimes i am not able to get the whole i
-
Adobe reader DC keeps installing over 11
Use Reader 11 and lately every time I return to my computer, Reader DC is now the default reader. I did not want to change from 11 so I remove DC and reinstall 11. the next day I return to my computer and DC is back !! I do not like DC, do not want t
-
Problem installing Audio Drivers for Windows XP on G550
I have tried all the posibilities to install sound drivers for Win XP on G550, but every attempt a big failure . Could someone help me to install sound drivers? System gives error of Now Media Object.