ITunes does not recognize my Nano after update to 7.6.0.29

I recently updated my iTunes software to version 7.6.0.29 and my Nano 3rd generation is not recognized anymore. Once it is plugged into the computer, Windows locates it and opens up the Windows Explorer. iTunes does not find the Nano at all.

I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

Similar Messages

  • HT201263 itunes does not recognize my iphone after update

    First I had Trouble installing the latest Itunes Update, then I had to delete Itunes from my computer and re-install it. Now, it doesn't recognize my Iphone and I can't sync. What do I do now?  Yes, I have an older Iphone (3GS) but, what the ****!
    Any Ideas, Anyone?
    Thanks
    FurrfaceOK

    Hello FurrfaceOK,
    The following article provides troubleshooting that can help get iTunes to see your iPhone.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • Itunes does not recognize my device after ios8 update

    Why does iTunes does not recognize my device after iOS8 update and what can I do to resolve this.
    I am getting a "plug-into-Itunes-logo" screen on my iPad. Thx!

    Hi there janis831,
    It sounds like your device may be stuck in Recovery Mode. Take a look at the article below for how to restore your device.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • ITunes does not recognize my Iphone after I tried to unlock it

    I tried to unlock my iPhone with redsnow but smth went wrong and now it sais conect to iTunes, but iTunes does not recognize it. iPhone is stuck in conect to iTunes picture.

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone - http://support.apple.com/kb/HT3743.

  • Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

    After an ipad software update, it does not recognize my Ipad in Itunes.  Gives error 14. what to do?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
    If you haven't synced to a computer them (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • ITunes does not recognize iPod Nano (5th gen)

    This just started recently...
    I am running OS X 10.5.8 on my PPC G5 Dual 2.0 and iTunes 10.4.1.
    I am experiencing 2 problems:
    1. iTunes no longer sees my iPod Nano - the iPod shows on my computer but iTunes does not display the "DEVICES" section in the left side bar.
    (It had been working before but I think this happened after I upgraded to iTunes 10.4.1)
    2. Whenever I quit iTunes it takes a few seconds to close the iTunes menu bar and then displays the error message "the application itunes quit unexpectedly".
    I have been all over these forums and followed every bit of information I could find.
    I've reset the iPod
    I've tried every USB port available
    I've uninstalled iTunes and installed a freshly downloaded version
    I've run Disk Utility several times (below are the results from the last run...)
    Repairing permissions for “The Old Forest”
        Reading permissions database.
        Reading the permissions database can take several minutes.
    Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/QuickLook/iWork.qlgenerator/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    ACL found but not expected on "Applications/Utilities".
    Permissions repair complete
    Any suggestions will be greatly appreciated.

    Problem Solved...
    I had a third party software/plug-in called JAX installed with iTunes.
    I uninstalled it and now iTunes 10.4.1 recognizes my iPod.
    Live a little... learn a lot!

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • ITunes does not recognize new Nano

    I recently acquired a 4GB Nano. Alreadying owning a shuffle and a Mini, I plugged in the Nano. It was recognized by updater but when attempting to apply the latest patches, updater hung up. Since then, my PC recognizes the Nano as a fixed disk and the do not disconnect flashes from the moment it is plugged in. I have left it in such state for as long as a whole day while at work. Additionally, when I try to eject it, the PC will not allow me to do so. If that wasn't enough, iTunes quit recognizing my Mini as well.
    I have uninstalled, removed and reinstalled iTunes and Ipod updater several times. I have done the 5 Rs numerous times on the Nano and Mini. I finally got the Mini working again but the Nano continues to have the same problems.

    I have had a similar problem with a 1g Nano. After leaving it on all day flashing do not disconnect I came home and restarted the computer forgetting that the iPod was still attached and blinking. When the computer came on an XP diagnostic window came up saying that the volume on drive was dirty and it was repairing the drive. Once that completed I fired up iTunes and the initial screen asking to name the iPod came up and then it started dowloading my music and has been fine ever since. I hope that this helps.

  • Itunes does not recognize iphone during os update

    During the update of the os the phone swiches to recovery iboot mode. The pc then loses contact and doesn't recognize it anymore. When i attach the phone to another pc it recognizes the recover mode of the phone and it can be switch back to factory settings.
    Everytime i start itunes it gives an message:
    The software needed for communication with Ipods and mobile phones is not corectly installed. Do you want iTunes to repair the problem.
    But the fix is apperently not working because the next time i start the message remains.
    The problem of not recognizing the ipone does not exsist during normal iphone sync, only after installing a new OS.
    I already tried:
    - removing itunes, all drivers, all apple software and reinstalling everything
    - http://support.apple.com/kb/TS1495
    - i only found this error message in the log iPod Service:
    cannot find event-id 0 from source iPod Service. [...] service started
    Anybody any suggestions? Please let me know?
    Greetings,
    Alex

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • ITunes does not recognize my Nano

    Hello,
    When I open iTunes, the message "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
    Okay, I've downloaded the latest version of iTunes 7.4.1.2 and have tried to install it. Towards the end of the install, the message "Service 'iPod Service' (iPod Service) failed to start. Verify you have sufficient privileges to start system services" with a 'Retry' or 'Cancel' option.
    The iPod itself works just fine. iTunes seems to work just fine as well. But for some, reason, the iPod is no longer recognized by iTunes, although WinXP sees the Nano plain as day. I've never had this problem before and have been able to simply plug the Nano into a USB port and voila. My iPod shows up in Itunes. Something has since corrupted.
    Suggestions are welcome. Thank you.

    Check these out:
    iPod in My Computer but not iTunes
    iPod Not in My Computer or iTunes
    Check the Device Manager
    Windows Laptop Doesn't Recognize iPod Over USB
    I hope this helps!

  • Car does not recognize phone book after update 7.0.2

    Nissan Maxima 2012

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • ITunes can't read my Nano after updating to new software and iTunes

    Recently bought a nano and nike + ipod kit.
    When I inserted the nike receiver, I got an error message that said this ipod does not support the device (or something like that). I went to the help pages and proceeded to download the latest version of iTunes and the most up to date software. After that the computer restarted, except now when i connect my nano to my computer, iTunes does not recognize my nano (i.e. I don't see my nano on the left hand navigation bar) and the screen on my nano has the infamous "do not connect" error message. It's been like that for a while. I'm concerned I may lose data.
    Any help would be greatly appreciated.

    This is a common problem - try this thread for assistance:
    http://discussions.apple.com/thread.jspa?threadID=561013&tstart=75
    Ric

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • ITunes does not recognize iPod (3rd gen?) even after trying everything...

    I have searched and not found this exact problem on any of the forum pages. My computer (PC) recognizes my iPod as an external USB drive. It is completely charged up (from the AC power). No error messages. Screen shows the "updating - do not disconnect symbol" constantly while docked but the pod does not show up in iTunes at all. I can get the main screen (menu) page by disconnecting the USB device through Windows, but when I try to select any of my data on the pod it shows nothing downloaded on the device. I've tried everything in the support section (most recent version of iTunes, checked that iPod service is running, reinstalled the COM interface for iPod service, deleted and reinstalled iTunes, etc. As a final resort, I "restored" the pod to factory settings using iPod Updater, but no joy...To say I'm unhappy is putting it mildly. Any suggestions before I jump out a window or something????
    Pentium III   Windows XP  

    Sorry for the curt/short explanations, but I am very frustrated.
    My computer recognizes my iPod. iTunes does not.
    iTunes does not recognize my other nano (2gb) or my friends shuffle. However, when my friend's shuffle is plugged into the computer, the iTunes window will pop up though I still can't see the actual device. On my nano and video, iTunes does not pop up.
    In response I have...
    I have reset my iPod.
    *no luck
    I have uninstalled an reinstalled the program 5-8x.
    *no luck
    I have run Spybot and Ad-aware just in case.
    *no luck
    I have changed the power management on my USB hubs.
    *no luck
    I have specified and changed the letter pathway of not only my iPod but my other usb peripherals.
    *no luck
    I have "reinstalled" the COM Interface about 5x after various changes.
    *no luck
    I have downloaded the recent iPod updater and that dealt with my iPod JUST FINE and then ran iTunes.
    *no luck
    I have selectively chose the with processes are on the startup.
    *no luck
    but for good measure, here are the processes running right now:
    taskmgr.exe
    svchost.exe
    firefox.exe
    Zboard.exe
    qttask.exe
    alg.exe
    ctfmon.exe
    lsass.exe
    services.exe
    winlogon.exe
    csrss.exe
    smss.exe
    explorer.exe
    iPodservice.exe
    zboardtray.exe
    spoolsv.exe
    iTunesHelper.exe
    wdfmgr.exe
    Programs like Anapod recognize my iPod. They both mount and execute processes just fine.
    Can anyone help me here??
    hp pavillion zd7360us   Windows XP Pro   iPod Video 60 GB and iPod Nano 2GB

Maybe you are looking for

  • Need help in Sql Loader

    Hi sir, i have one file cointer header,batch and transactions for example, 0PUAP03 071001721110000012000000037558 (header) 1200707103137000000010104 (batch) 2200707103137000000002845014D218499280101 10771450000 (transaction) 2200707103137000000007259

  • Use of   DBMS_LOB.LoadCLOBFromFile on insert trigger

    We have a system where most of the data is stored on disk as BFILES. However, in certain circumstances I'd like to read some of the files into the database as CLOBS as well. I'd like to do this on record creation and thought the easiest way to do thi

  • The requested resource does not exist

    Hello! I have a programm, made in Visual Stuio2005(.NET). I installed the PDK for .NET and now i get this failure massage: The requested resource does not exist. Any ideas?

  • I am trying to  understand how Photoshop deals with ICC profiles

    I have an Epson 3880 printer, which I am trying to master.   I am printing with either Photoshop CS2 or Photoshop CS5.   I would like to u nderstand where the profiles for particular papers are kept. For example, in principle, I can go to the Epson w

  • Populate Combo Box field into another field

    I've got a form (form1) based off a table (table1).  In the form I have a field from table1 called bagtype that is a combobox type field with a row source from another table with two fields that show up in the drop down box when selected.  When I sel