ITunes does not refresh the CD device when insterting a new CD for importin

After importing a CD I eject the CD, with either the iTunes eject button or my CD drive, upon placing a new CD in the drive iTunes does not recognize it..showing the old CD name and files...
I then have to close iTunes and reload it... it now sees the new CD and I can import it...
HELP...

i have the exact same problem.
sometimes it will recoginize that theres a cd
but most of the time it wont
and i've tried it with a lot of different cd's.
help in this matter would be incredibly appreciated

Similar Messages

  • Idad in reset mode but itunes does not recognize the device.

    I have my ipad in restore mode but itunes does not recognize the device.  What can I do to reset the ipad?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • "An I-Pod has been detetected but Itunes does not recocognize the device.  The device does not show up on ITunes.  Help?

    When I hooked up my new Ipod Nano, The message in I-Tunes reads, "An I-Pod has been detected but Itunes does not recognize the device"  Any ideas to help?

    Hi mulebacker,
    Here is an article that provides troubleshooting steps for this message:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Cheers!
    - Ari

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • HT1296 My PC  ITunes does not see mu IPAD Mini when I plug it in to the computer.

    My PC  ITunes does not see mu IPAD Mini when I plug it in to the computer.

    Device not recognized. Take note of item 5.
    http://support.apple.com/kb/ts1538

  • HELP iPod classic (2007) 80 GB FROZEN SCREEN (Now Playing window showing the song that is suppose to be playing, will not respond to buttons, Will not SYNC, iTunes does not recognize it AT ALL when I plug it in. Has anyone had similar experience? fixed?

    HELP
    My iPod classic (2007) 80 GB FROZEN SCREEN (Now Playing window showing the song that is suppose to be playing, will not respond to buttons, Will not SYNC, iTunes does not recognize it AT ALL when I plug it in. Will not shut off, will not charge... pretty frustrated, I updated it recently (within the last 10 days....Has anyone had similar experience? If so was it fixed? Please post any help for me... thank you... I am pretty frustrated right now.

    its fixed!!  After posting my problem with the FROZEN ipod classic (2007) 80 gb a screen popped up with similar subjects that I did not find in my original search.  'Rich Fleming' in the community posted a suggestion to someone with a similar frozen issue and it WORKED when I tried it. 
    hold the 'menu' and the 'circle' buttons down at the same time, KEEP the pressed until the apple appears. and now it is working.  Hope this helps others.

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    My wife ran the battery down in her shuffle.  When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off.  Is the battery that dead, or is something else wrong.  ITunes does not show the shuffle

    Hi Jennsman40,
    Welcome to Apple Support Communities.
    If this symptom persists even after you charge your iPod Shuffle, see this page for some troubleshooting steps:
    http://www.apple.com/support/ipodshuffle/assistant/itunes/
    Best,
    Jeremy

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • HT1923 itunes does not recognize my iPhone 5 when I connect to iTunes

    iTunes does not recognize my iPhone 5 when I connect to iTunes

    Hello mprwinded,
    It sounds like your iPhone is not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue you described:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Wiped our old iPad 1 clean, now can't install iOS from iTunes.  iTunes does not "see" the devise.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.

    Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista).  iTunes does not "see" the device.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.  Just want to get it operating again for browsing and e-reading.

    OK.  You merely erased the content and settings.  The IOS is still there.
    If it has NEVER been jailbroke, here are some standard repair procedures.  From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I contiue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing.  Please reinstall itunes.  Reinstalling itunes does not fix the problems

    I continue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing.  Please reinstall itunes.  Reinstalling itunes does not fix the problems

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • HT201210 Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Does anyone recom

    Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
    Thank you

    There is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple
    About the error code.....
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    If needed.....
    Additional Information
    If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.

  • HT1386 my iphone does not pop up under devices when I plug it into my new macbook pro. Any ideas?

    my iphone does not pop up under devices when I plug it into my new macbook pro. Any ideas?

    iOS: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • How can I grant users the ability to pause/resume printing without a "print operators group" password.

    Greetings, We are running 10.8.5 on 30 machines in an active directory environment (graphics lab). The clients are experiencing a persistant error when pausing or resuming print jobs. Each time something is paused, it requires an administrator passwo

  • Is the new Update  not for OS X

    JSC 2004 Q2 ML - not trial Just trying to download the new patch - but no dice. unable to connect to update center - no proxy ... Any idee why it is not working Or even better any place to download the update mauallly Thanks -Bj�rn

  • Xsl and rtf

    hi all, is it possible to call an rtf in an xsl? i have an rtf that contains static content and i want it displayed as the last page in my XSL-FO file.. is this possible? thanks allen

  • Recently played playlist doest sync in order of recently played

    On my nano and other iPod's I could sync the recently played list by last played time. With the iPhone, it is syncing in a random order even though on iTunes it is sorted by last played time. How can I get around this?

  • How do we get URL to display in address bar on reinstall'd FF 28.0 ?

    FF used to show the URL in what I THINK is called the "address bar" such that we cd rt click to save link location and know exactly where we are. Now it only shows the Subject - which is REDUNDANT bc that subj. is already displayed . . . which is was