ITunes does not see airport express speakers but airfoil does

iTunes 6.0.2 and AE 6.3
iTunes does not see the AE speakers but Airfoil does.
Have restarted AE to no avail.

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

Similar Messages

ITunes 10 does not see Airport Express because port 3689 is unavailable

I never had problems with iTunes 9 and Airport Express, but since iTunes 10 the following problem occurs regularly: iTunes starts, but does not "see" Airport Express (AE) as an external speaker. Sometimes it also loses connection after Windows hibernate mode, but that might be another issue.
What I found out is that it is NOT a firewall issue, otherwise it would not work once in a while. What I saw, though, is that TCP port 3689 is sometimes stolen by other apps like Mozilla Thunderbird (TB). I.e. if Thunderbird is started BEFORE iTunes, it might use 3689 as a listening socket. iTunes then cannot see AE until I shut down TB and restart iTunes. This is very annoying and I only found out after many weeks when watching TCP live connections in my personal firewall software.
Two questions arise:
1) If listening port 3689 is unavailable, why does iTunes not show any error message? There is absolutely no indication as to why it does not find the external AE loudspeaker. BTW, the AE config programm can connect to the hardware easily.
2) Even if port 3689 is blocked by another application, Airfoil for Windows works flawlessly with my AE. I can even tunnel iTunes through Airfoil and then listen to music in my living room, even though iTunes does not see AE. Why can a 3rd party program do something which iTunes can't?
There must be a way to smarten up iTunes and fix this annoying bug.

Nerd

Airfoil does not see airport express

I am running 10.6.8 and airfoil does not see airport express liek it used to. I am using an older version of airfoil. Any one have any suggestions so I can get my music to work through my home speakers again?
thanks

Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

Verizon FIOS Network does not see Airport Express

I recently upgraded to Verizon FIOs and they replaced my Airport Extreme Base Station an Actiontek wireless router. The new Router does not see my 2 Airport express wireless stations that I use for ITunes broadcasting. I tried a hard reset of the basestations with no luck.
I also tried to connect the old Airport Express into the ActionTek. It sees the Express stations but will not connect to the internet (Although I set up for a DHCP connection, it dtill serches for a PPPoE host)
The Verizon FIOs tech support is of no help.
Please help!!!!!!!

You will need to reconfigure your 2 AirPort Express (AX) to join the wireless network provided by the ActionTek.
OR... If you want to replace the ActionTek with your AX, it appears that you will need to ask Verizon to change to the Ethernet MAC address from the MAC address of the ActionTek. Several people have reported that this is necessary.

Airport network form time capsule does not see airport express

Hello,
I'm rather new, bought my first apple few days ago, it's great. Have been throwing away years by using the blue screen machines
I now have mac mini, today i bought time capsule and an airport express.
time capsule to make my network and the airport express to connect my stereo.
Important: I have no internet connection yet, it will be installed in 10 days.
for now i use a mobile phone connection on the mac mini.
I installed time capsule. time machine works and airport is in the air.
With airport utility i can see the time capsule, but nothing else.
it has been there for a short time, but then time capsule was gone.
i can not find the utility to start installing airport express all over. Maybe i gave the wrong WPA2 password with the first install, but can not find the software to try again.
I placed the a.expr within 1 meter of time capsule for this test.
led of time capsule is green, led of a.expr is amber blinking.
I did a reset of the a.express, no response.
I downloaded the latest a.express client, no difference.
airport is still on. it does not see the a.express.
how to proceed?
Is it only possible ONCE to setup a.express the right way? I remember answering questions which i can not find anymore.
Sorry for the long story,
hope you can help,
Rik

oh oh oh oh........ :O
Found it.... before i connected the a.express with time capsule by a wire....does not help!
Solution is to make this wire connection between a.express and mac, then it's possible to reconfigure.
After this wire everything worked in 5 minutes.
Anyway.... thanks for reading...
Rik

Windows xp does not see airport express

I run an airport express as a base station in my apartment which works fine both for my iMac and my Palm pda. But a friend is visiting me presently, and her windows laptop, running XP, does not see my wifi station, although it sees others in the area. I tried removing security but that made no difference.
Is there perhaps was something that had to be ticked in the airport base station setup to enable Windows laptops to see Apple wifi? As for example when I send attachments in Apple Mail I have to tick a box to make them Windows-friendly.

I use Airport Express... two Macs and another laptop running Win XP and couldn't get the Win to see the network until I changed to a different card, a D-Link Airplus. I think it was all of $19.95 and works like a charm...
Also, in Airport Admin Utility/Network, make sure you have:
Distribute IP addresses checked and where it says; Share a single IP address using DHCP and NAT, click the pop up menu and select: Use 10.0.1.1 addressing.
Also, her Win might be picking up interference your iMac or Palm doesn't... try a different channel:
By default, the AirPort software automatically selects the best available channel when the base station is plugged in. If your base station is experiencing interference, try changing the channel it uses.
To select a different channel:
Open AirPort Admin Utility, located in Applications/Utilities.
Select your base station and click Configure.
Enter the base station password if necessary.
Click AirPort, and then choose a new channel from the Channel pop-up menu.
Carolyn
Message was edited by: Carolyn Samit

Airport Utility scans but does not see Airport Express

Hi,
When I open Airport Utility it scans looking for devices and finds none. Meanwhile. the yellow light is blinking on AE.
We had Verizon over a week ago to change and set up a new wifi router, as the old one stopped working. The network name didn't change. Access to the web is fine, so there's nothing wrong with Airport. I can't figure it out.
Thanks,
Raphael

rshammaa wrote:
When I open Airport Utility it scans looking for devices and finds none.
Try connecting your Mac to the AirPort Express with an Ethernet cable to see if that allows AirPort Utility to see it.

New Time Capsule does not see Airport express

Hi
We purchased A new Time Capsule but are not able to get the existing Airport Expresses to work with it. I tried looking for the AE with AIrport Utility and cant see them.
Any idea how to get these to work with our new Time Capsule 3 TB? My Airpot Utility is Version 6.2
Thanks
Jenny

I've reset one of them. no luck
Suggest that you try the following if you have not already done so.
Power down the AirPort Express (AX) for a few moments
Hold in the reset button and keep holding it in for 10-12 seconds while you plug the AX back in to power
Release the reset button and allow 40-45 seconds for the AX to restart to a slow, blinking amber light
Move the AX near your Time Capsule and computer
Temporarily, connect a spare Ethernet cable from your computer to the AX
Open AirPort Utility to configure the AX
If you do not have a spare Ethernet cable handy, the AX is broadcasting a wireless signal with a name like Apple Network xxxxxx. You must first connect to this network from your computer.
Then, open AirPort Utility. You may be asked to "switch" networks so that AirPort Utility can connect
If you use the recommended Ethernet cable method, you can disconnect the Ethernet cable once the AX has been Updated. Then, move the AX to the desired location.
Configure the second AX like you did the first.
If you have the older "b/g" version of the Express devices, unfortunately you will need to configure the Time Capsule and Express devices to Participate in a WDS network if you need to enable the Ethernet ports on the AX devices.
This will result in the Time Capsule being changed to a "g" wireless router, since WDS will only operate at "g" wireless speeds.

MacBook does not see Airport Express

My Macbook does not find my AX when I scan for it using Setup Manager. I used it fine about 3 mos ago just for iTunes, but now I need to use it as a real router and I can't even find it.
I have reset, and reset while plugging in. Still nothing.
Please help me get my AX working!
Thanks
Trevor
...ps I am good at giving stars etc

So, I finally tried unplugging and resetting everything. I reset my cable modem, and unplugged my AX, and shut down my computer. Then I did everything fresh from the beginning, making sure that things were plugged in appropriately and it worked! Good news.
But the place where I finally got it working wasn't where I wanted it. Yesterday after it had been working for about a week, I decided to move it to a more central location. ...now I am back where I was when I wrote the first question.
I tried setting it up using the Airport Admin Utility and it responded while I was connected with the ethernet cable, but as when I moved the other end of the cable to the cable modem from my computer, nothing. So, I reset soft and hard. Nothing. Now it just flashes.
Any other ideas? Once it is set, do I just move the ethernet cable like I did, or did I mess that part of it up?
Thanks so much!

My pc does not see airport express?

When setting up my airport express I have a flashing amber light and error message that says utility was unable to find wireless device.

You need the Windows version of Airport Utility to configure an Airport Express. And you need to enable wireless on the computer unless you are connecting the AEX directly to your modem via Ethernet cable.
Did you read through manual that came with the AEX?

AirPort Utility does not see AirPort in G5 but see it in PB G4

Ich cannot lease a IP from AirPort Snow with my G5. Manual setting with IP works good but DHCG gives me a 169.13. IP
everything works good with my PB G4 with a setting importiert from G5 before this trouble appears

Sorry I had so many change in Hardware I have an AirPort Extreme Base and AirPort Utility works fine with the PowerBook G4. When you open Network Preferences and click advanced you will see TCP/IP
if you open it you see configure IPv4 you should Using DHCP.

I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?

I am using Window 7 I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be?
It does appear on a friend's computer using Firefox.
Barossa Vintage Festival ... this is the missing link on my computer just under the link named ... Autumn photo collection

No problems here with the tree links:
View photos
Friends gather for breakfast
Friends take an Autumn drive
Photos of the Barossa Festival
Reload the web page and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouse

I want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!!

ITunes 10.6.3.25 on ethernet connection loses airport express speakers but iPhone 4 airplay works

Hi,
I have started experiencing a problem this past week (Aug 2012) that I see sometimes reported here. When I run iTunes 10.6.3.25 on a Win7 machine that is connected by ethernet to my router, the airport express speakers would regularly disappear. I can always connect to these airport express via airplay from my iPhone 4. In fact when the airplay speakers disappear from iTunes on the ethernet-connected machine, I can reliably make them reappear by turning on the Music app on the iPhone. But after a while the airplay speakers would disappear again. On a Win7 laptop connected via wifi to the network the same version of iTunes seems so far not to exhibit the same problem.
Has anyone discovered what the underlying problem is or found a solution?

I ran into the specific problem in another thread. There are more than 100 connections from the apple TV's to iTunes. You can do a netstat -a (windows or Mac), and verify the problem. iTunes is smart enough to stop allowing more than 100 connections but stupid to allow the ATV to create so many connections.
Now for what you really want! Set all of your ATVs to wifi only. Even setting the iTunes host to wifi might help also. I think that wifi is more unreliable, and forces connections to drop, keeping the count under 100.
I also turned off ip v6. That could help you also. I originally had problems on a Mac mini, and built a windows 7 box to try to fix the problem. The wifi trick worked on both platforms. Several of us have bug reports into apple. I have a wired house also, and am very angry to NEED to use slow wifi to overcome this problem. The ATV gen 3 has been able to keep up with 1080p over wifi, so it doesn't hurt too much. What really hurts is spending over 40 hours troubleshooting this bug.

ITunes 7.6 on Windows not showing airport express speakers(It works on 7.5)

I have several pcs on my wireless network and have been using my WEP configured airport express speakers successfully for some time now. I have noticed however that 2 new pc's I've bought and installed the latest itunes 7.6 onto are unable to see any external speaker sets. I've looked on the forums, disabled any firewalls still to no avail. Whats frustrating is I am able to connect, configure and play music from a pc with itunes 7.5.020.
What's broken in 7.6? Can anyone help me understand why this is working on a 7.5 version of itunes and failing on 7.6?

Sorry to sound short with you Henry - it was one of the first things I checked. I cannot see anything different between the settings on the working and non working pcs other than the version of iTunes. I've scanned a few postings and think it looks like a defect. Can anyone connect to their Airport Express speakers from PCs newly installed with the latest Itunes? Does anyone have any instructions on how I can downgrade to a working version?

ITunes does not see airport express speakers but airfoil does

Similar Messages

Maybe you are looking for