ITunes does not show any devices
My iTunes does not show any devices, even the new iPhone connected directly to the PC.
Hey rtm56,
Thanks for the question. I understand that your iOS devices are not being recognized by iTunes for Windows. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/TS1538
Thanks,
Matt M.
Similar Messages
-
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".
I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.
-
ITunes does not show any of the music we have in f:\iTunes library.
Our PC running Vista froze up so we upgraded to Windows 7. iTunes does not show any of the music we have in f:\iTunes library. How do I access my music?
Use the command File > Add Folder to Library, and point it to the folder(s) where the music is.
-
Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console.Laura Quitugua wrote:
Hi,
I have syced my outlook email with my iphone 4s and ipad.
Note that only the email account info (username, login, server) is sync'd.
The actual emails are not sync'd.
Opening an email on one device does nothing on teh other devices. -
I connect my phone to the computer and it does sync but it does not show my device? How can I see my device in itunes?
Hello Crenshaw2332
With the new version of iTunes, it would be the the left of the iTunes Store icon
If you like how itunes worked before, I will suggest taking a look at the article that will bring back most commonly used features in iTunes.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
In iTunes 11 you have the option to turn the Sidebar and the Status Bar on or off; they are off by default. To do this in the menus, go to:
Show Sidebar - Choose View > Show Sidebar (this feature will display iTunes features on the left side of the application including Library, Store, Shared, Genius, and Playlists).
Show Status Bar - Choose View > Show Status Bar (this feature will conveniently display the number of items and playback time for a category, for example, music or movies).
Thanks for your question
-Norm G. -
My old iPhone died, so I just got a new one. I am hooking it up to my computer for the first time. The iTunes on my computer doesn't show any devices as being hooked up to the computer when I plug in my iPhone. Yet my iPhone is charging so I know it is connected to the computer. Any suggestions on how to get my iTunes to recognize the new device? Thanks
Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem. -
I just had all of my music transferred to a new Windows Dell computer. Itunes doesnt show any of the music except the music that is in the cloud. Can smeone help me direct my itunes to the corect library.
THanksIn itunes menu, FILE, ADD FOLDER TO LIBRARY, point to the folder where you store all your music and click SELECT FOLDER button.
-
I also can't connect to the iTunes store. Strangely though I can access my library on my iPad. I'm trying to copy karaoke files I use for work on to Karaoke Anywhere, and I need to "see" my iPad under Devices to do it.
I have reset the iPad, reinstalled iTunes and Quicktime, disabled any automatically run startup software. I have deleted podcasts and changed the date.
Why the heck isn't this working? I've only had this thing for 2 weeks and I've been more frustrated by it than by any Windows device I've ever owned!!!Have you tried restarting the Apple Mobile Device Service?
http://support.apple.com/kb/TS1538 -
Linksys E2500 does not show any devices in DHCP client table
Equipment:
Old Westell DSL modem, still runs like a champ
Linksys E2500
home built desktop running Linux 12.10
We're having intermittent WiFi. This morning I finally sat down to do some troubleshooting. SOP for me is to reset both the modem and the router. Modem bounce went fine.
Before bouncing the router I did some nosing around and noticed there were no devices listed when I nosed throught the DHCP client table, not even the wired connection for my desktop. There should be 2 MacBooks, an Apple TV device and a Galaxy S4 showing up.
The other oddity - on a lark I switched the MacBooks over to the guest connection and there have been no problems with wifi since.
What gives...?
Any and all help will be greatly appreciated!You make sure that the router's firmware is up to date. Reset it again since that's recommended after the upgrade and reconfigure the settings again. All devices in your network connected/ utilizing the router's DHCP server should be listed under the Clients Table.
For the intermittent wireless issue, try changing the wireless settings; ssid, wireless channel, and the security. For the channel, play around with channels 1, 6, 9, and 11. -
Also, iTunes does not detect any device connected to the computer.
Hi, Arthur330.
Thank you for the question. I am unsure if you are having the issue with your device not being recognized on a Windows or Mac computer so I will include the troubleshooting articles for both below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Jason H. -
I have just gotten my new ipad!!! I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music. Any suggestions??
Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
If you're using an extension, stop and just use the included sync cable.
Try using a different USB port.
After you installed iTunes, did you restart your computer?
Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site. -
My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :( -
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
TS1538 itunes does not see any of my devices.
itunes does not see any of my devices. It used to. But not any more. Why. They show up in Windows. But not itunes.
<Edited by Host>Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem
Maybe you are looking for
-
Issues with WebDav over SSL via Terminal Server when Accessing SharePoint 2013
Hi All, We have deployed a terminal server from which multiple users access and heavily use SharePoint 2013 (hosted on a separate server). The SharePoint site is published to the internet and is operating over an SSL certificate. Over the last few mo
-
I have a per-message text plan (I'm not a big texter) on my iPhone 4S. If a non-iOS 5 device sends me an SMS (like an Android device, or pre-iOS 5 iPhone), I'm going to pay for that incoming SMS. Does iMessage show me that? I see from other discuss
-
ITunes tags are not the same as the actual mp3 tags for some songs
The other day I noticed that some of the names for songs in my iTunes library had changed from the correct names to the file name (which was Artist - Name) but the rest of the tags (album, genre, ect.) for those tracks remained unchanged in iTunes. I
-
Add an extra line in the output xml file
Dear All My scenarios is idoc to xml file.For the resultant xml file i have to append a line <?Test Line?> after <?xml version="1.0" encoding="UTF-8" ?> while passing it to legacy system ? How generate such a xml file in xi? Any help would be appr
-
How to cancel Object.wait()
Hello, I have some methods where I am using myObject.wait() to pause them. The only way I can continue is if I call myObject.notify() which continues the program at that point. So basically this is behaving like a 'pause' right now. What i need is a