Itunes does not start anymore after upgrade to 6.05.20

I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
Any other idea?
Thanks
Christoph

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

Similar Messages

Macbook does not start anymore after upgrade to Snow Leopard

I successfully upgraded my MacbookAir to Snow Leopard, but my son's Macbook refuses to start after having been upgraded.
Please help!

Hello,
my MacBook Pro (late 2008 unibody) just needs a main logicboard replacement, fortunatly still within warrenty, after updating to 10.6.0. I experienced the following: With an update from 10.5.6 to 10.5.7 the MBP freezed within 10min. after reboot, with every restart it freezed after a shorter period and finally freezed during the boot process. I've mounted the MBP as an external HD to my iMac, did an backup and deleted the internal MBP harddrive by overwriting it with zeros. I did the usual procedure of resetting SMC, P/V-RAM and reinstalled 10.5.6 - everything was fine again!
When Snow Leopard came out, I updated again, hoping the issue has been repaired. BUT I experienced the same problems and with some system permission deleting I got SL running as long as I did not turn on AirPort. As soon airport is activated and an internet connection is established I could count the seconds until the mac freezes. And it will only come up again by deleting the system configuration preferences (via single user mode booting).
Thereafter I was sure there is a hardware problem with the airport card or the logic board. The Apple Service Provider did not find any hardware failure and finally will change the logic board. Hopefully I got the Mac back next Tuesday. I let you know about the results.
Best regards!
PS: Obviously software could damage hardware or some hardware components used by Apple are not compatible with some of their software.

ITunes does not start anymore when connecting iphone

Hello,
since my latest upgrade of itunes (still under snow leopard) itunes does not start anymore when connecting my iPhone 4 to my Macbook Pro.
Meanwhile I upgraded to Lion and installed the latest itunes patch but same behavior,
Does anybody has an idea to solve this issue?
Thx,
Hendrik

Hi,
See this Discussion:
https://discussions.apple.com/message/15693777#15693777
Cheers,

HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

My iphone 5 does not ring anymore after upgrading to ios 7.0.2. It did not happen right away, but maybe 2 weeks ago. I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in. I also turned my phone off and it still only vibrates when calls and messages come in.

I found another feed and said there is a silent button next to volume bar. That was the problem.

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

After install of the last version, iTunes does not start anymore ...

Symptom : described in the title.
Everything has been working for years, and after upgrade, just nothing happens.
I can see the iTunes + iTunes helper + iPod services processes in Task Manager, but no window appears.
Even after killing all that & start again, nothing happens.
I just bought a second iPod and I need iTunes to get working!
Prompt help would be appreciated.
br

I just realised you are using XP here is a fuller method for Troubleshooting silent launch failure in Windows XP
Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
A couple of simple things to try:
XP
http://support.apple.com/kb/TS1776?viewlocale=en_US
Vista
http://support.apple.com/kb/TS2363?viewlocale=en_US
Stop the bonjour service, this FAQ has instructions:
http://support.apple.com/kb/HT2250?viewlocale=en_US
But usually it is due to a problem with cryptographic services.
Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
Start>>Run>>Services.msc
you should find the smart card service in the list. Report back with your findings.
Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
Then work through *Method 4* in the following link:
http://support.microsoft.com/kb/822798
You should be able to copy and paste the individual lines to save on typing.
Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
If there are no errors try starting iTunes.

Itunes does not start even after reinstall

Hi Ituners,
I have a 64 bit windows 7 PC. Itunes recently crashed. When I tried to run it, my PC would freeze up and I would have to reboot it. I followed the directions from the apple forum on doing a complete unistall. When I went in to uninstall the individual programs, Quicktime was not on the list. ??? I removed the other programs and went through the itunes related folders. Found quicktime there and deleted the folder (as per the instructions) and rebooted the PC.
Reinstalled itunes and all related programs showed up, but itunes will not run. I hit shift/ctrl and clicked icon to start program in safe mode. Pop-up on screen says that I may continue or exit. When I hit continue, it closes. Nothing after that.
Any help here would be nice. Itunes has become a major thorn in my side, but I need it for my Apple tv.

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

BExAnalyzer.exe does not work anymore after upgrade to FEP 3

Dear all,
after installing FEP 3 I noticed the following behaviour:
If I try to run the new Bex Analzer from the Menue (Start -> Programs -> Business Explorer -> Analyzer) nothing happens at all. Neither Excel does start, nor the Analyzer plugin is loaded at all. A start from C:\Program Files\SAP\Buiness Explorer\BI\BExAnalyzer.exe) does as well not work.
But running the Excel macro directly from C:\Program Files\Common Files\SAP Shared\BW\BExAnalyzer.xla starts Excel and the plugin is working as expected.
So the question is: is it a bug or a feature?
Best regards,
Andreas

I checked all components of the installation and everything seems to be ok. The only thing that I fell over is the statement
"Ensure that the BExAnalyzer Application has authority to create dll's in the user's temp folder"
Do I really have to take care of this? How? (I already disabled the virus scanner, but the result is the same - it's not working)...
Thanks,
Andreas
PS: Can someone tell me in more detail, what the BExAnalyzer.exe is trying to do?

CS6 does not start anymore after use of several months.

I have no test version but a licensed product. Does anybody have the same problem? Looking forward for answers.
Diamuc

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

HT204210 My Photostream in iPhoto 9.6 does not sync anymore after upgrade to MacOS 10.10.2

My Photostream is perfectly synchronised in all my iOS devices and at www.me.com.
But in iPhoto (and Aperture) it went wrong (no synchronising after jan 26th).
Could it be that Apple is more strict in Apple ID?
E.g. originally I registered my name + mail-address (Bill Wye [email protected]).
In the last years Apple added me.com and iCloud.com.
According to me.com my AppleID is Bill Wye [email protected]
According to my iOS devices my AppleID is Bill Wye [email protected]
According to my Mac my AppleID is Bill Wye [email protected] (In my Mac I can't change the mail-address of my Apple ID)
Or do you think Apple isn't strict at mail-address in Apple ID, and is it another little defect file somewhere in some applicationlibrary?

that is three different Apple IDs - log all devices into the same Apple ID
LN

After installation of 10.2.2 iTunes does not start up anymore

I updated my system to 10.2.2. today. Now itunes does not start anymore. I receive an Error Message saying "iTunes was was not installed correctly. Please reinstall iTunes Error 7 (Windows Error 998))" I reinstalled iTunes - same effect. Even a complete reinstallation of the entire .NET Framework 2, 3.5 and 4 did not help. Could anyone help please. Honestly spoken I am quite upset since I do not have access to my library anymore.....
Thanks
Holger

If it isn't the .NET thing, and you aren't getting an additional message mentioning a specific filename, then it's probably damage to one of the software components installed with iTunes, Holger.
Usually it's a damaged Apple Application Support, but I've seen it produced by a damaged QuickTime in some contexts too. So it might be best to do a complete reinstall of iTunes as per the instructions in the following documents.
If you've got a Windows XP system, see:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
If you've got a Windows Vista or 7 system, see:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Does that fix the error for you?

ITunes does not start after Lion installation

hi,
after upgrading to the latest iTunes version and to Lion, I get "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?".
Precise:
I upgraded iTunes to the latest version (from the previous one, I am a regular upgrader) yesterday afternoon around 15:00, then I worked several hours on my iTunes library (including some new buys). At night I then installed Lions. After starting Lions, iTunes does not start anymore.
I have read the threads about copying old library files from the "previous iTunes Libraries" folder. But if I do that, I will loose the entire afternoon work. Anyway it I cannot understand why iTunes now believes to be older after Lion installation than before...
Can somebody please help?
br
a

Hi,
after backing up, I downloaded the latest version again and it really worked.
Strange that evidently the Lion installation did revert yesterdays upgrade from iTunes. Now it works, including all my latest changes from yesterday.
Case solved:)
br
a

Itunes does not start in Windows 7

Hi,
Itunes does not start anymore...
It used to work witout any problems. Any hints?
Thanks
Philofun

Restart Computer.
Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR

ITunes does not start when I plug in my iphone after I upgraded to Lion?

iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

http://support.apple.com/kb/TS1538

Itunes does not start anymore after upgrade to 6.05.20

Similar Messages

Maybe you are looking for