ITunes doesn't launch  error 1 "apple aplication support is not found"

Every single time I attempt to open iTunes, it doesn't and it shows me a pop up telling me that the ERROR 1 occured, that the apple aplication support was not found, it tells me to uninstall and install itunes and so i've done several times, but nothing. PLEASE help me if you can i'm going nuts here!!!!!

Try removing all iTunes related software and then reinstalling.
Use the method in this article:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
If an uninstall doesn't work, you need to use the Microsft Installer cleanup utility to remove it.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)

Similar Messages

  • When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

    When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • Please help me with this error: "Apple application support was not found... Error 2"

    Can anyone please help me with this error: "Apple application support was not found... Error 2"
    I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
    "Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    Thank you

    iTunes "Apple Application Support is required... Error 2" and possible fix.
    I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
    I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
    Problems:
    The initial error during the installation of iTunes was:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
    The error (after installing iTunes) when trying to run iTunes was:
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
    After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
    http://support.microsoft.com/kb/2688946
    This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
    Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Note: The installation of VC++ rolls back when it fails.
    Solution:
    Through this error I found this MSKB article:
    http://support.microsoft.com/kb/946414
    The Automated MS "Fix It" msi package didn’t work.
    Note: Please backup your registry first (see the above MSKB article for instructions).
    I opened the registry and (as instructed in the MSKB article) deleted the following keys:
    HKEY_LOCAL_MACHINE\COMPONENTS\
    PendingXmlIdentifier
    NextQueueEntryIndex
    AdvancedInstallersNeedResolving
    Reboot and reinstall iTunes.
    If it helps you please like this so others can find it.

  • HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

    I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Cant install itunes 10.5 keep getting Apple Aplication Support - could not open key error

    I ve been getting this message over and over:
    Apple Application Support
    Could not open key:
    UNKNOWN\Components\DA42B......................
    Verify that you have sufficient access to that key, or contact your support personnel
    I have uninstalled all Apple soft and tryed to reinstall itunes 10.5, but there is no help. I run win 7 64 on toshiba notebook

    Open regedit using "run as administrator".
    Go to the registry key:
    HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionInstallerUserDataS-1-5-1 8Components
    ...and selected the folder DA42BC89BF25F5BD0AF18C3B9B1A1EE8
    (there are three folders with very similar names A,B & C you want the first one)
    Right click & choose Permissions
    Click Advanced, and then the Owner tab
    Type  (not administrators) in current owners field and check the box to replace the owner on subcontainer and volumes
    Apply settings and then click Permissions tab. Once again, add  (not administrators) to the list of permission entries, then click edit and check all permission boxes. Also click the 2 bottom boxes concerning the inheritable permissions.
    [Note: In my case I was a member of administrators and administrators was already set in all of the above settings - I've no idea why it needed to be set to my user rather than the administrator group, anyway it solved the problem for me]
    Click OK
    Now back on the main permissions tab, add  in the user name window and then check full control and read checkboxes. Click OK.
    On the menu bar click file > exit
    But if u have the message pop up more then once then just make the permissions for the entier S-1-5-18Components folder

  • Itunes app wont open keeps saying apple aplication support was not found

    my itunes wont open it keeps saying that apple aplication suppourt was not found

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Help!! ive tried to download itunes to my new laptop and it keeps coming up with error 2 - apple aplication support was not found ?? has anyone come across this that can help me??

    Help pleasE?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS1424 When downloading itunes update, I got the error, Apple Application Support was not found.*

    On my windows pc, I mistakenly deleted Applie Applications Support file.   Any help with how to restore it?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT201413 updated last night and now ipod says to coonect to itunes which i cant because apple application support was not found.  tells me to uninstall and reinstall itunes.  Will i lose all my music or is it still on my ipod?

    Updated ipod last night and now when turned on tells me to coonect to itunes (picture of usb cable with arrow to itunes).  I can't connect to itunes on computer because apple application support can't be found.  Tells me to uninstall then reinstall itunes.  Will I lose all my music or is it still on my ipod?

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters.)

  • When I try to open iTunes, Error 2 appears saying that iTunes won't open b/c "Apple Application Support was not found". What do I do???

    When I try to open iTunes, Error 2 appears saying that itunes won't open because "Apple Application Support was not found". What do I do???

    If your problem is only w/iTunes, you really should re-post over in the iTunes for Windows forums instead of the iPod forums. 

  • Itunes error...."Apple application support was not found"

    Hello. For some reason i am having problems running iTunes on my computer. I keep getting this error:
    "Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    I've done this a couple of times and continue to get the same message when i try to start iTunes.
    Any ideas?
    thanks, skcudog

    See Troubleshooting issues with iTunes for Windows updates.
    Start with the section Install missing components.
    tt2

  • Keep being met with the same error sign: 'Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstal iTunes, and install again. Error 2'

    iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error  'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??

    Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
    Uninstalled /reinstalled
    Disconnected all firewalls and antivirus and even uninstalled them with Revo..
    with that effort..I then used winrar to extract to a file and manually install each piece..
    all load EXCEPT Apple Application Support..but only if I do it manually..
    Quicktime had to be manually installed.
    Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
    Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
    Windows Installer likes to quit alot..not sure how to fix that..urgh
    Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
    Any help is much appreciated!

  • My computer wont finish downloading itunes it says that apple application support was not found. how do i fix this?

    my computer wont finish downloading itunes it says that the apple application support was not found and it tells me to uninstal it and download itunes again n i did so n it keeps doing the same thing, even tho i have downloaded itunes before in this computer. please i need help with this!

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • What does it mean when it says "Apple Application Support was not found"

    Ok. I uninstalled everything that was related to itunes because it wouldn't let me connect my ipod to itunes. a few days ago I think I uninstalled something that I needed because now I can't even open itunes. It keeps saying "apple application support was not found" when I try to open the program. And it says :"Error 2 (Windows error 2)" I've tried to download everything. itunes 64-bit, 32-bit, update, latest version, and something else I believe. Why can't I get itunes back on my computer? Please help!

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Apple application support is not found

    I am not able to install iTunes in my WIndows 7 PC.  I am getting an error "Apple Application Support is not found".

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for

  • HP MIni 110-1030nr - USB Problem!

    Hello! I have 2 HP Mini 110-1030nr netbooks. Mine runs like a charm! I love it!  My dad's however is having major problems! For the first 2 weeks it ran great, but then the hard drive died in it. We sent it back to HP, they turned it around and had i

  • Performance issue with using out parameter sys_refcursor

    Hello, I'm using Oracle 10g, with ODP.Net in a C# application. I'm using about 10 stored procedures, each having one out parameter of sys_refcursor type. when I use one function in C# and call these 10 sp's, it takes about 78ms to excute the function

  • How to remove 24pa pulldown?

    Hello, my first post as a new CS6 user coming from FCP7. So far I'm loving it. Here's the thing; I dragged some 24pa footage off a HVX200a P2 card onto the disc then imported to a 1080/23.98 timeline. All looked great until I applied the warp stabili

  • Publishing test site to browser

    When I publish the test site to the bowser per the tutorial instructions, why do I not see the top navigation tabs as shown on the tuitorial screen?

  • Placing payments (lookup question)

    Hello. First of all, thanks to anybody who reads this and replies to it. I'm getting really frustrated with myself because I'm a bit dyslexic (seriously) and I'm having some difficulty with HLOOKUP, VLOOKUP and LOOKUP. Basically, I have a table with